Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. User-Friendly 3D Environmental Profiler AUV

    SBC: NEKTON RESEARCH LLC            Topic: 813

    We propose Ranger ES, a low cost, autonomous underwater vehicle (AUV) for three-dimensional profiling and water samplings of chemical, physical, and biological parameters of oceanic and fresh waters. The AUV will be programmable by point and click to analyze a volume of water continuously for the selected parameters. After returning for pickup after a day¿s run, it will download its data into a ...

    SBIR Phase I 2006 Department of Commerce
  2. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  3. MEMS-Based Optical Beam Steering System for Multi-Color 2D Spot Arrays

    SBC: Applied Quantum Technologies            Topic: A06T010

    Optically addressing a large number of atoms trapped in a periodic lattice would be a critical missing technology necessary to achieve scalable quantum computation. A micro-electromechanical systems (MEMS) based beam steering optical system is proposed to meet the needs of this topic. The system utilizes (a set of) tilting mirrors to create reconfigurable spots on a target of square lattice. The s ...

    STTR Phase I 2006 Department of DefenseArmy
  4. Materials Development in GaN for Non-polar Substrates Sliced From Bulk Crystals

    SBC: KYMA TECHNOLOGIES, INC.            Topic: A06T019

    Kyma Technologies will lead a team of researchers in the development and optimization of bulk GaN crystal growth processes for fabricating non-polar GaN substrates. Processes for extended growth of GaN crystals in the c-axis direction will be developed to fabricate non-polar and semi-polar substrates of selected orientations. This approach will be compared to heteroepitaxial growth in non-polar di ...

    STTR Phase I 2006 Department of DefenseArmy
  5. Keratin Bioceramic Antibiotic Putty (KBAP) for Bone Regeneration

    SBC: PLUREON CORP.            Topic: A04190

    Extremity fractures are a significant concern in both the civilian and military populations. In the military experience, extremity fractures can sometimes comprise the majority of peacetime orthopaedic injuries. During armed conflict, bone trauma from penetrating missiles is similarly significant, as the experience in the Persian Gulf and Croatia has shown. Anti-personnel mines and improvised e ...

    SBIR Phase II 2006 Department of DefenseArmy
  6. Innovative Intelligent Agent and Cognitive Decision Aids Component Technology

    SBC: PROLOGIC, INC.            Topic: A04011

    This Phase II SBIR project develops and implements the Situational Assessment and Warfighter Analysis Framework (SAWAF) to support analysis and assessment of network centric fire support and probable courses of action. The Framework employs a Service Oriented Architecture (SOA) to provide capabilities to integrate diverse intelligent agent based algorithms within a net-centric computing and infor ...

    SBIR Phase II 2006 Department of DefenseArmy
  7. Intermetallic Reinforced Magnesium Composite

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: A06054

    Magnesium (Mg) matrix composites are attractive for various structural applications due to their excellent specific properties. The proposed work involves developing a new type of Mg matrix composite with intermetallic particulate reinforcement that is produced by standard rapid solidification and powder metallurgy processing. The uniqueness of this type of composite lies in the compatibility be ...

    SBIR Phase I 2006 Department of DefenseArmy
  8. Insensitive Munitions Modeling and Simulation

    SBC: Corvid Technologies LLC            Topic: A05201

    The objective of this proposal is to improve the computational tools identified in Phase 1 that will be useful in assessing rocket and missile propulsion systems for compliance with insensitive munitions (IM) requirements. Comprehensive testing to ascertain IM compliance for such systems is time-consuming and expensive. High-fidelity computational tools exist that can be used to address the asse ...

    SBIR Phase II 2006 Department of DefenseArmy
  9. Innovative Materials for Lightweight Armor

    SBC: 3TEX, Inc.            Topic: N/A

    We propose synergistically implementing two emerging ballistic materials,aluminum foams and 3-D woven polymeric composites, in theconstruction of lightweight armor with ceramic facing. In the recentballistic studies both materials have separately demonstrated improvementsin ceramic-faced armor. 3-D woven FRP enables to reduce dynamic deflection,localize damage and increase multiple hit capabilit ...

    SBIR Phase II 2001 Department of DefenseArmy
  10. Helikite Elevated Platform

    SBC: CAROLINA UNMANNED VEHICLES INCORPORATED            Topic: N/A

    Frontline units need a system to provide continuous reliable GPS support. The Army requires a method of deploying a Pseudolite at several hundred or thousand feet to provide augmented GPS signals. To meet this need Carolina Unmanned Vehicles, Inc. willdevelop the HELIKITE Elevated Platform (HEP), consisting of a small tethered blimp mounted in a special Carrier that allows operation by a single ...

    SBIR Phase I 2001 Department of DefenseArmy
US Flag An Official Website of the United States Government