List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Microcapillary Quartz Sensors for Screening Injectability of High Concentration Protein Formulations

    SBC: Qatch Technologies, LLC            Topic: None

    The objective of this SBIR Phase I proposal is to determine the feasibility of viscosity characterization of high concentration protein formulations (HCF) by QATCH’s microcapillary quartz technology. HCFs are non-Newtonian fluids with shear-thinning behavior and they are administered to patients by subcutaneous or muscular injections. The injectability of HCFs depends on the viscosity at high-sh ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Development of “Permit Wizard” Software for AssistedPermit Application Completion

    SBC: Total Quality Systems, Inc.            Topic: 833

    TECHNICAL ABSTRACT: The objective of this project is to research the technical feasibility of designing a software tool “Permit Wizard” that will automate the process for aquamarine permit application submittal, review, approval/disapproval and issue (including collection of fees). Aquaculture producers are currently faced with slow, complex, and often confusing permitting processes that must ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  3. Satellite Ground Station Network for Real-Time Space Weather Data

    SBC: USML L.L.C.            Topic: 843W

    The goal of this Phase II effort is to carry out a series of tasks with the purpose of developing a ground station network that can provide less than 15 minute latency in acquiring data from NOAA space weather assets. These tasks include:  Finalize a set of specifications for ground stations so they can be used to determine the suitability of existing ground stations for the different missions ...

    SBIR Phase II 2017 Department of Commerce
  4. Development of a sensor for detecting Paralytic Shellfish Poisoning toxins

    SBC: SeaTox Research Inc            Topic: 842

    Paralytic shellfish poisoning (PSP) due to consumption of contaminated shellfish is an increasing problem is the coastal waters of the United States, particularly in New England and the Pacific Ocean. The symptoms of PSP include vomiting, diarrhea, shortness of breath, confusion, and loss of coordination in both marine animals and humans. In severe cases, PSP toxins can cause respiratory failure a ...

    SBIR Phase I 2017 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Predictive Modeling Tools for Metal-Based Additive Manufacturing: A Composable Simulation Model for Metal Powder-bed Fusion Additive Manufacturing Processes

    SBC: 3DSIM LLC            Topic: 90106

    Additive manufacturing lacks efficient, composable physics-based computational frameworks to predict quality and performance for arbitrary geometry, orientation, location and process parameter combinations. A new set of composable computational tools capable of accurately predicting the geometrical accuracy, residual stress and microstructure of the parts made using metal based AM has been develop ...

    SBIR Phase II 2016 Department of CommerceNational Institute of Standards and Technology
  6. Satellite ground station network for real-time space weather data

    SBC: USML L.L.C.            Topic: 843

    The goal of this project is to determine the feasibility of developing a ground station network capable of delivering real time space weather data to end users. Specifically, the proposed works seek to assess existing and future communications requirements for providing better than 15 minute latency (threshold objective) for transfer of data from NOAA space weather assets to the ground for distrib ...

    SBIR Phase I 2016 Department of Commerce
  7. Predictive Modeling Tools for Metal-Based Additive Manufacturing

    SBC: 3DSIM LLC            Topic: 9010673R

    3DSIM will provide a solution to additive manufacturing’s lack of efficient, composable physics-based computational frameworks to predict quality and performance for arbitrary geometry, orientation, location and process parameter combinations. A new set of composable computational tools capable of accurately predicting the geometrical accuracy, residual stress and microstructure of the parts mad ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  8. Porous Membrane Electrode for Quantitative Detection of Toxins

    SBC: Mercury Science Inc.            Topic: 816N

    In Phase I, a novel porous electrode was designed to demonstrate a rapid, simple assay for the detection of domoic acid in marine samples. During Phase II, methods to manufacture porous electrodes will be improved to enable high volume production of low-cost biosensors that can be connected to a potentiostat. These biosensors will be incorporated into a portable test kit for the quantitation of do ...

    SBIR Phase II 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  9. Porous Membrane Electrode for Quantitative Detection of Toxins

    SBC: Mercury Science Inc.            Topic: 816N

    There is a need for a simple, portable, quantitative method to monitor the presence of Harmful Algal Blooms. Electrochemical detection offers some advantages for analysis, but traditional sensors are not practical for routine field use. Adapting colorimetric immunoassays on porous, flow-through electrodes can provide a means for rapid, low-cost, portable quantitative environmental analysis. Thi ...

    SBIR Phase I 2012 Department of Commerce
  10. Low Cost Stabilized Laser Diode System

    SBC: Ceebco, LLC            Topic: N/A

    This Phase 1 SBIR project aims to develop a frequency stabilized laser diode system suitable for application in optical metrology and in displacement measurement. The compact design of the semiconductor laser lends itself to many applications where a coherent light source is required, but space is at a premium. Some fields, such as precision optical metrology require a coherent light source whose ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government