Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  2. Avalanche Photodiodes for Enhanced Photon Counting Performance at 1.5 um

    SBC: Princeton Lightwave, Inc.            Topic: N/A

    APDs offer tremendous potential for the numerous applications in which photon densities are extremely low and the ability to count single photons is essential. Researchers have recently found that the optimization of InP-based APDs for counting photons may require innovative design approaches that are quite distinct from those shown to optimize APD linear mode performance. For this program, we pro ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  3. Manufacturable Geiger-Mode InGaAs/InP Avalanche Photodiodes for Near-Infrared Photon Counting

    SBC: Sensors Unlimited, Inc.            Topic: N/A

    Application of NIR photon counting technology is impeded by the marginal performance of available detectors. We will develop new InGaAs/InP APD designs optimized for Geiger mode photon counting, delivering ten re-designed APDs, having detection probability greater than 50% and dark count rate less than ten thousand per second. During Phase II we will develop a new computer model of the Geiger mode ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  4. Handheld Photoacoustic Chemical Agent and Toxic Industrial Material Detector

    SBC: MANNING APPLIED TECHNOLOGY            Topic: CBD05112

    Manning Applied Technology proposes to develop a handheld infrared spectrometer, ideally suited to detection of airborne chemical agents at and below permissible exposure limits. This approach offers unmatched sensitivity and specificity for detection of all types of chemical vapors. The instrument is modular, rugged, compact and highly sensitive. Volume pricing will be less than $1000 each. ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  5. Flexible Composite Chemical, Biological, Radiological, and Nuclear (CBRN) Barrier for the Joint Expeditionary Collective Protection System

    SBC: UTILITY DEVELOPMENT CORP            Topic: CBD05124

    The main objective will be to develop a high-performance flexible composite barrier that provides protection from Chemical, Biological, Radiological, and Nuclear (CBRN) agents and Toxic Industrial Materials (TIMs). UDC will develop a thermoplastic elastomer (TPE) coated fabric to provide CBRN agent resistant tents. Fire retardant capability will be achieved by the addition of fire retardant fi ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  6. Critical Data Processing for Chemical Warfare Simulant Field Testing- Advanced Data Fusion

    SBC: Torch Technologies, Inc.            Topic: CBD05110

    To properly measure (and understand) the performance of a standoff detector, properties of the challenge cloud must be known. Meteorological models, such as HPAC and VLSTRACK, have proven to be reasonably good tools for predicting cloud properties. However, a problem with these tools is that they deliver ensemble averages and may not describe a specific cloud to the detail required. The Dugway ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  7. NANOMETER-SIZE STEP HEIGHT TEST STRUCTURES

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    MCNC PROPOSES A FEASIBILITY STUDY AND EVALUATION OF THREE PROMISING APPROACHES TO THE FABRICATION OF SURFACE TEST STRUCTURES ON SILICON. SURFACE FEATURES ON THE FIRST STRUCTURE WILL BE PRODUCED BY CONTROLLABLY ETCHING THERMALLYGROWN OXIDES. FEATURES ON THE SECOND WILL BE MADE BY ETCHING PIEZOELECTRIC THIN FILMS. USING THE PIEZOELECTRIC FILM AS PART OF A CAPACITOR, STEP-HEIGHT CAN BE VARIED AND PRO ...

    SBIR Phase I 1992 Department of Commerce
  8. GRAIN GROWTH CONTROL IN THE NET-SHAPE PROCESSING OF NANOSTRUCTURED WC-CO COMPOSITES

    SBC: Nanodyne Inc.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of Commerce
  9. DIGESTIVE ENZYME SUPPLEMENTS TO INERT FEEDS FOR SMALL-EGG FISH LARVAE

    SBC: International Aquaculture Res            Topic: N/A

    INADEQUATE STARTER FEEDS SEVERELY HOLD BACK NEW AQUACULTURE ENTERPRISES SUCH AS PRESENT ATTEMPTS TO RAISE FISHES WHOSE LARVAE DEVELOP FROM SMALL EGGS AND HAVE VERY "DIFFICULT" FOOD REQUIREMENTS. INERT LARVAL FEEDS HAVE NOT SUCCESSFULLYELIMINATED THE STRICT DEPENDENCY ON NATURAL FORAGE DURING THE CRITICAL POST-LARVAL STAGE AFTER YOLK ABSORPTION AND BEFORE THE DEVELOPMENT OF A DIGESTIVE SYSTEM WITH ...

    SBIR Phase I 1987 Department of Commerce
US Flag An Official Website of the United States Government