Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Microbial Enhancement of Flax to Replace Fishmeal and Oil in Salmonid Diets

    SBC: MONTANA MICROBIAL PRODUCTS, LLC            Topic: 8110

    Flax containing omega 3 fatty acids and relatively high protein content offers advantages as a potential source of plant protein and oil to replace fishmeal and oil in aquaculture feeds; reducing both pressure on marine fisheries and the principal source of contaminants in farmed fish. MMP ahs used innovative fungal culture technology in separate processes to develop low cost, multi activity cell ...

    SBIR Phase I 2005 Department of Commerce
  2. Rad-hard Reconfigurable Bi-Directional Level Shifters Technology for Micro- and Nanosatellites

    SBC: American Semiconductor, Inc.            Topic: S104

    Various technologies available to space system designers that operate at different voltage levels. It is, however, important to interface, maintain, and update these systems. For example, the Sun Earth Connection (SEC) missions are likely to have a variety of experiments needing to be accomplished with a single nanosatellite. A rad-hard reconfigurable bi-directional level shifters would allow th ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  3. Low-Power, Lightweight Cloud Water Content Sensor

    SBC: Anasphere, Inc            Topic: E103

    The water content of clouds, whether in liquid or ice form, is a key variable to be measured when either calibrating remote sensing systems or when calculating the climatological effects of clouds. While a variety of sensors exist for making these measurements, all of the existing sensors require far too much power or other energy input to be used on small platforms with limited payloads such as ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  4. Low Permeability Polyimide Insulation

    SBC: RESODYN CORPORATION            Topic: X602

    Resodyn Technologies proposes a new technology that enables the application of polyimide based cryogenic insulation with low hydrogen permeability. This effort supports the Vision for U.S. Space Exploration policy and the Exploration Systems Enterprise. This technology will benefit designers of cryogenic fuel tanks envisioned for new Earth-to-Orbit (ETO) Transportation vehicles. Specifically th ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  5. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  6. Handheld Photoacoustic Chemical Agent and Toxic Industrial Material Detector

    SBC: MANNING APPLIED TECHNOLOGY            Topic: CBD05112

    Manning Applied Technology proposes to develop a handheld infrared spectrometer, ideally suited to detection of airborne chemical agents at and below permissible exposure limits. This approach offers unmatched sensitivity and specificity for detection of all types of chemical vapors. The instrument is modular, rugged, compact and highly sensitive. Volume pricing will be less than $1000 each. ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  7. Monolithic, High-Speed Fiber-Optic Switching Array for Lidar

    SBC: ADVR, Inc            Topic: E102

    The proposed optical device is a fiber-based multi-channel switch to quickly switch a fiber-coupled laser among many possible output channels to create a fiber-based fixed-array laser transmitter for next-generation NASA lidar systems. The key innovation is the use of an arrangement of electro-optic prisms created in a nonlinear optical crystal through domain reversal to direct the laser into one ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  8. NANOMETER-SIZE STEP HEIGHT TEST STRUCTURES

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    MCNC PROPOSES A FEASIBILITY STUDY AND EVALUATION OF THREE PROMISING APPROACHES TO THE FABRICATION OF SURFACE TEST STRUCTURES ON SILICON. SURFACE FEATURES ON THE FIRST STRUCTURE WILL BE PRODUCED BY CONTROLLABLY ETCHING THERMALLYGROWN OXIDES. FEATURES ON THE SECOND WILL BE MADE BY ETCHING PIEZOELECTRIC THIN FILMS. USING THE PIEZOELECTRIC FILM AS PART OF A CAPACITOR, STEP-HEIGHT CAN BE VARIED AND PRO ...

    SBIR Phase I 1992 Department of Commerce
  9. ADHERENT OXIDATION RESISTANT COATING FOR POLYMER MATRIX COMPOSITES

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1992 National Aeronautics and Space Administration
  10. A 350 DEGREE C 6H SILICON CARBIDE THYRISTOR

    SBC: CREE RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1992 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government