Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  2. Handheld Photoacoustic Chemical Agent and Toxic Industrial Material Detector

    SBC: MANNING APPLIED TECHNOLOGY            Topic: CBD05112

    Manning Applied Technology proposes to develop a handheld infrared spectrometer, ideally suited to detection of airborne chemical agents at and below permissible exposure limits. This approach offers unmatched sensitivity and specificity for detection of all types of chemical vapors. The instrument is modular, rugged, compact and highly sensitive. Volume pricing will be less than $1000 each. ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  3. 3D Scaffold and Stem Cell Based Bioengineered Skin for Treatment of Cutaneous Vesicant Injury

    SBC: Nomadics, Inc.            Topic: CBD05117

    Vesicants have been used as chemical warfare agents since World War I and are still considered a major class of chemical threat agents both for the military and for homeland security. There are four different vesicating agents: impure sulfur mustard, distilled sulfur mustard, phosgene oxime, and lewisite. Among them, mustard is the most important militarily. The organs most commonly affected by ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  4. Software for Weld Sensing and Control

    SBC: ANAMED, INC.            Topic: N/A

    Gas Metal Arc Welding (GMAW) accounts for a significant proportion of all welding performed. Due to its relatively high speeds and metal deposition rates as well as relatively low equipment and maintenance costs, it is also the most popular process for automated, and especially robotic, welding. There are, however, problems that significantly restrict its manufacturing applications. The efforts at ...

    SBIR Phase I 1997 Department of Commerce
  5. A Ruggedized System for Measuring Extreme Winds

    SBC: Caregiver Technologies, Inc.            Topic: N/A

    We will develop technology, termed a Ruggedized Wind Measurement System (RWMS), to measure directly extreme winds with high space and time resolution, focusing on the winds that occur beneath hurricanes at land fall. This development effort will include design, fabrication of two prototype RWMS units, and a series of proof-of-concept demonstrations in strong mountain-induced downslope and severe t ...

    SBIR Phase I 1997 Department of Commerce
  6. Development of A1203 Detector Material and OSL Dosimetric Technique for

    SBC: Stillwater Sciences, L.L.C.            Topic: N/A

    This proposal describes a new research program to be established at the small business Still Sciences, LLC, in collaboration with Department of Physics of Oklahoma State University. The overall goal is to develop and commercialize an all-optical dosimetry system for industrial radiation processing based on a novel Pulsed Optically Stimulated Luminescence readout technique and a new Al2O3 material ...

    SBIR Phase I 1997 Department of Commerce
  7. NANOMETER-SIZE STEP HEIGHT TEST STRUCTURES

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    MCNC PROPOSES A FEASIBILITY STUDY AND EVALUATION OF THREE PROMISING APPROACHES TO THE FABRICATION OF SURFACE TEST STRUCTURES ON SILICON. SURFACE FEATURES ON THE FIRST STRUCTURE WILL BE PRODUCED BY CONTROLLABLY ETCHING THERMALLYGROWN OXIDES. FEATURES ON THE SECOND WILL BE MADE BY ETCHING PIEZOELECTRIC THIN FILMS. USING THE PIEZOELECTRIC FILM AS PART OF A CAPACITOR, STEP-HEIGHT CAN BE VARIED AND PRO ...

    SBIR Phase I 1992 Department of Commerce
  8. DIGESTIVE ENZYME SUPPLEMENTS TO INERT FEEDS FOR SMALL-EGG FISH LARVAE

    SBC: International Aquaculture Res            Topic: N/A

    INADEQUATE STARTER FEEDS SEVERELY HOLD BACK NEW AQUACULTURE ENTERPRISES SUCH AS PRESENT ATTEMPTS TO RAISE FISHES WHOSE LARVAE DEVELOP FROM SMALL EGGS AND HAVE VERY "DIFFICULT" FOOD REQUIREMENTS. INERT LARVAL FEEDS HAVE NOT SUCCESSFULLYELIMINATED THE STRICT DEPENDENCY ON NATURAL FORAGE DURING THE CRITICAL POST-LARVAL STAGE AFTER YOLK ABSORPTION AND BEFORE THE DEVELOPMENT OF A DIGESTIVE SYSTEM WITH ...

    SBIR Phase I 1987 Department of Commerce
US Flag An Official Website of the United States Government