Award Data

The goal of this project is to determine the feasibility of developing a ground station network capable of delivering real time space weather data to end users. Specifically, the proposed works seek to assess existing and future communications requirements for providing better than 15 minute latency (threshold objective) for transfer of data from NOAA space weather assets to the ground for distrib ...

In Phase I, Vadum will develop a signal processing module designed to fuse data from multiple heterogeneous, multi-tiered sensors, as well as asoftware prototype demonstrating the automation of the fusion process for presentation to a Brigade Chemical Biological Radiological Nuclear(CBRN) analyst. The techniques developed will incorporate Chemical/Biological (CB) agent detection sensors, non-CB se ...

Existing approaches for the multi-sensor data correlation for chemical and biological defense fail to provide timely and accurate situationalawareness capabilities in the presence of complex CBRN attack scenarios. Toward the maintenance of a common operating picture for situationalawareness, innovations are required to fuse signature feeds from networked chemical/biological (CB) and non-CB sensors ...

The optimal design for a rapidly-deployable, airborne HAB identification sensor requires the determination of the minimum spectral, spatial, dynamic range, and deployment capabilities necessary to achieve the goal of operational detection. This sensor must be capable of rendering a positive identification, with a low false alarm rate, in optical shallow waters, where the bottom is visible in the ...

NanoCeramr filtration media has been developed for purification of water. The active component is a nano alumina fiber only 2 nanometers in diameter. When dispersed with microglass fibers as part of a non-woven fibrous filter it is capable of retaining sub-micron and nanosize particles smaller than virus while maintaining a high flux. Such media has a dirt holding capacity tens of times greater ...

The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

Manning Applied Technology proposes to develop a handheld infrared spectrometer, ideally suited to detection of airborne chemical agents at and below permissible exposure limits. This approach offers unmatched sensitivity and specificity for detection of all types of chemical vapors. The instrument is modular, rugged, compact and highly sensitive. Volume pricing will be less than $1000 each. ...

A method to take three polymers with varying viscosities and mixing those polymers together at the point of interest or more specifically through a micro dispensing nozzle, is being proposed. An active mixing scheme to ensure proper mixing at the pen tip is a feasible approach to this problem. The materials being mixed will not only range in viscosity but also in particle loading, which will be ha ...

We propose developing a prototype of a GUI-based wizard that: ¿ Guides users through the steps that are needed to define their processes using PSL in a visual/textual manner. ¿ Checks for consistency/correctness according to PSL ontology. ¿ Generates the PSL description. We believe that VISI-PSL will facilitate the generation of PSL descriptions to the extent that it will be used by process ...

A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...