Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  2. Integrated Control System for an Adiabatic Demagnetization Refrigerator

    SBC: Lake Shore Cryotronics, Inc.            Topic: N/A

    There are emerging markets that are driven by advances in x-ray micro-calorimeters. These detectors allow an energy resolution 10x better than existing commercial x-ray detectors. The primary application is the detection and analysis of nanoscale particle contaminates in IC production. The temperature stability of the micro-calorimeter is critical for real-time analysis and maintaining the x-ray l ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  3. Handheld Photoacoustic Chemical Agent and Toxic Industrial Material Detector

    SBC: MANNING APPLIED TECHNOLOGY            Topic: CBD05112

    Manning Applied Technology proposes to develop a handheld infrared spectrometer, ideally suited to detection of airborne chemical agents at and below permissible exposure limits. This approach offers unmatched sensitivity and specificity for detection of all types of chemical vapors. The instrument is modular, rugged, compact and highly sensitive. Volume pricing will be less than $1000 each. ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  4. Decontamination of Biological Warfare (BW) Agents, Toxic Industrial Chemicals (TICs) and Toxic Industrial Materials (TIMs)

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: CBD05113

    The US Government has spent hundreds of millions of dollars developing decontamination capabilities to protect our military personnel and equipment from chemical warfare agents. With much of the traditional research and development efforts within focused on decontamination of chemical warfare (CW) agents, there has been a recent shift in the research base to include biological warfare (BW) agents ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  5. Reducing the Weight and Volume of Peroxide-Based Decontaminant by using a Solid (Vice Liquid) Component for Hydrogen Peroxide

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: CBD05114

    Several new generation chemical and biological (CB) decontaminants are based on hydrogen peroxide (H2O2) chemistry. These new decontaminants have many desirable characteristics, including reactivity toward a broad spectrum of CB agents and toxins, as well as being less corrosive and more environmentally friendly than conventional decontaminating materials. However, these systems are still liquid b ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  6. Portable System for Immediate Decon of Interior Spaces

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: CBD05108

    Under the current SBIR solicitation, the DoD is interested in the development of novel decontaminating materials and methods to support rapid decontamination of interior spaces contaminated with chemical and biological agents. The proposed system should be portable, lightweight, self-powered and easy to use so it can be readily transported. The intended use of the portable system is to support ( ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  7. Blending of Aircraft Washing/Cleaning Detergents and Chemical/Biological (CB) Warfare Agent Decontaminants for a Dual-Use Application

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: CBD05115

    Under the current SBIR solicitation, the DoD is interested in the development of novel decontaminant solutions based on existing aircraft approved fluids (e.g., cleaning or deicing fluids), and application methods that will be compatible with the Transportable Decontamination System (TDS). The aircraft decontaminating solution should be capable of detoxifying chemical warfare (CW) agents, Non-Tra ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  8. Super-Precision Capacitance Bridge

    SBC: Andeen-Hagerling, Inc.            Topic: N/A

    NIST desires to develop a standard of pressure in the range of 0.3Mpa to 10 Mpa based on measurements of the dielectric constants of gaseous helium and argon. This requires capacitance measurements having a better linearity than can be made with any currently available product. It is proposed that the design of what is currently the most precise commercial capacitance bridge be modified to improve ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  9. Smart Life Science Laboratory Solution

    SBC: Entara Technology Group, LLC            Topic: N/A

    A SMART Life Science prototype that facilitates the management of instrumentation data has far reaching implications. As much as the benefit is to an individual scientist, the greater impact affects the entire economy by facilitating the rapid launching of new scientific discoveries that cure disease and produce new economic channels for firms. By improving process efficiencies in R&D organization ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  10. Tool Condition Monitoring and Diagnostics

    SBC: VulcanCraft            Topic: N/A

    A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government