You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Hybrid SiC-SiC/C-SiC Thermal Protection Structural Material

    SBC: 3TEX, Inc.            Topic: MDA08020

    Thermal protection materials for ballistic missile kill vehicles must retain strength and stiffness at temperatures around 1500-2000oC in an oxygen rich environment, and isolate payload electronics from excessive heating. Weight is a concern, since lighter weight translates to higher velocity and kinetic energy. Further, the TPS materials must have a long service life, including the ability to w ...

    SBIR Phase I 2009 Department of DefenseMissile Defense Agency
  2. Direct Write via Digital Beam Processing for Rad-Hard Flexfet CMOS

    SBC: American Semiconductor, Inc.            Topic: MDA08023

    The is an effort to increase radiation hardness/survivability of microelectronics through innovation of production processes and capabilities by establishing an economically viable low-volume sub-65nm rad-hard foundry CMOS capability based on Digital Beam Processing (DBP) technology. American Semiconductor (ASI) and Digibeam Corporation (DBC) propose a collaboration to evaluate sub-65nm radiation- ...

    SBIR Phase I 2009 Department of DefenseMissile Defense Agency
  3. Reconfigurable Course-Grain Analog Arrays

    SBC: Triad Semiconductor, Inc.            Topic: MDA08T007

    Development of configurable analog array architectures that meet a wide range MDA system application. Development and implementation of radiation hard by design techniques for analog circuits at the physical layout and circuit design levels.

    STTR Phase I 2009 Department of DefenseMissile Defense Agency
  4. Snapshot Raman Spectral Imager

    SBC: Applied Quantum Technologies            Topic: A09AT009

    Applied Quantum Technologies along with its university partner Duke University propose a coded-aperture, multi-aperture snapshot Raman imager. By combining an innovative optical design and advanced compressed sensing algorithms, a snapshot system provides dwell times much shorter than conventional slit-based or tunable-filter based spectral imagers. A short-wave infrared excitation source allows f ...

    STTR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  5. Media Free Coatings Removal Technology for Navy Platforms using Atmospheric Plasma

    SBC: ATMOSPHERIC PLASMA SOLUTIONS, INC.            Topic: N091065

    The Navy and other DoD components require a media-free, environmentally friendly, rapid, and non-destructive method to remove coatings applied on and aboard Navy ships. Atmospheric Plasma Solutions Inc. (APS) has developed an atmospheric plasma process to accomplish this goal. Current processes for the removal of coatings for shipboard applications are expensive, require massive amounts of energy, ...

    SBIR Phase I 2009 Department of DefenseNavy
  6. Robust Wideband Aircraft Altitude Estimation for Over-the-Horizon HF Radar

    SBC: STRAD Corporation            Topic: AF083184

    Robust altitude estimation for over-the-horizon HF radar requires a combination of advanced signal processing and high fidelity ionospheric propagation modeling. Since aircraft height is manifested in closely-spaced direct and ground-bounce multipath reflections off the target, we propose two new high resolution signal processing methods for discriminating small time delay differences from a seque ...

    SBIR Phase I 2009 Department of DefenseAir Force
  7. The Design of Defensive Software Systems

    SBC: Computer Measurement Laboratory, LLC            Topic: OSD09IA3

    CML proposes to extend its current work in dynamic kernel monitoring for attack recognition and mitigation. The focus of this proposal is on mitigating the effects of an attack on executing software process by an individual user. The object of interest is the mapping of the activity of a user of a software system onto a model of their normal use of this software. In the construction of a mathe ...

    SBIR Phase I 2009 Department of DefenseAir Force
  8. Innovative manufacturing research on forming of la

    SBC: CORVID TECHNOLOGIES, LLC            Topic: A09051

    Corvid Technologies is pleased to offer the following response to this topic, A09-051 Innovative manufacturing research on forming of large light armor alloy sections resistant to blast and penetration. Corvid is offering to partner with the non-profit research institution Concurrent Technologies Corporation (CTC). We will investigate specialty welding techniques developed at CTC to determine app ...

    SBIR Phase I 2009 Department of DefenseArmy
  9. Electrical power generation for sustained high speed flight

    SBC: RIVIS, INC.            Topic: AF08BT25

    Development of a compliant microfabricated heat exchanger to work with thermoelectric devices as a means of power generation for hypersonic vehicles is proposed. Polymer-based materials provide to provide compression on the thermoelectric module, to ensure optimal thermal contact, while allowing for compliance to allow for the change in materials expansion without exceeding the failure point of th ...

    STTR Phase I 2009 Department of DefenseAir Force
  10. Technologies for the Rapid Curing of Composite Parts

    SBC: FIREBIRD ADVANCED MATERIALS, INC.            Topic: AF083C068

    Certain polymer resins used in the manufacturing of carbon fiber reinforced polymer (CFRP) aerospace components have relatively long autoclave cure cycles on the order of 6 hours or more.  These long cure cycles cause bottlenecks and inefficiencies when producing composite parts with these thermoset resins. This project will investigate and develop a new manufacturing process for rapidly curing c ...

    SBIR Phase I 2009 Department of DefenseAir Force
US Flag An Official Website of the United States Government