Award Data

The objective of this SBIR Phase I proposal is to determine the feasibility of viscosity characterization of high concentration protein formulations (HCF) by QATCH’s microcapillary quartz technology. HCFs are non-Newtonian fluids with shear-thinning behavior and they are administered to patients by subcutaneous or muscular injections. The injectability of HCFs depends on the viscosity at high-sh ...

The overall goals of our effort are to reduce the cost and lead times of test articles while maintaining their fidelity. Corvid Technologies will partner with North Carolina State University to examine why metal alloys produced by AM processes differ in high strain-rate response compared to traditional foundry (TM) alloys at their CAMAL facility. We will identify the differences in response by exa ...

Vigilant Cyber Systems, Inc. (VCS) proposes to design and develop the Manipulation Analysis and Visualization (MAV) Tool to enable users to analyze extremely large and diverse multi-dimensional datasets and gain insight into the data and the phenomena that produced the data. MAV will revolutionize analysis of modeling and simulation and test data by significantly enhancing user cognition and enabl ...

Nerve agents exert their toxic effect by binding to and inactivating enzyme acetylcholinesterase, a key enzymatic regulator of cholinergic neurotransmission. The binding becomes irreversible after a varying amount of time with nerve agents and this aging process limits the treatment window of oxime reactivators. To enhance the current antidote treatment of nerve agent autoinjectors, a pyridostigmi ...

The development of a generalized moving body capability for Computational Fluid Dynamics (CFD) flow simulations of highly transient flowfields is critical to system analyses of Divert and Attitude Control Systems (DACS) for Kinetic Warheads (KWs). Testing capabilities are limited in the DACS operating regime; therefore, computational tools are essential for such analyses. The flow in the DACS its ...

The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

Manning Applied Technology proposes to develop a handheld infrared spectrometer, ideally suited to detection of airborne chemical agents at and below permissible exposure limits. This approach offers unmatched sensitivity and specificity for detection of all types of chemical vapors. The instrument is modular, rugged, compact and highly sensitive. Volume pricing will be less than $1000 each. ...

The military has a need for high power/high frequency electronics which can operate at high temperatures for applications such as radar and electronic warfare systems. While Si and GaAs are already being used near their limits of output power and operating temperature, the potential of SiC is just beginning to be realized. High frequency 4H-SiC MESFETs with an f(max) as high as 12.9 GHz, and RF ou ...

This proposed Phase I program focuses on the development of a novel solid electrolyte that is low cost and has the potential of yielding high conductivity for lithium ion.s These novel materials have stable crystal structures and are quite robust up to temperatures of 560 degrees celcius. Objectives of the Phase I program are: (i) synthesize candidate elctrolyte compounds; (ii) fabricate and chara ...

MCNC PROPOSES A FEASIBILITY STUDY AND EVALUATION OF THREE PROMISING APPROACHES TO THE FABRICATION OF SURFACE TEST STRUCTURES ON SILICON. SURFACE FEATURES ON THE FIRST STRUCTURE WILL BE PRODUCED BY CONTROLLABLY ETCHING THERMALLYGROWN OXIDES. FEATURES ON THE SECOND WILL BE MADE BY ETCHING PIEZOELECTRIC THIN FILMS. USING THE PIEZOELECTRIC FILM AS PART OF A CAPACITOR, STEP-HEIGHT CAN BE VARIED AND PRO ...