Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Effect of Surface Finish and Post-Processing on the Fatigue Life of Additively Manufacturing Parts

    SBC: Voxel Innovations, Inc.            Topic: N182126

    In response to the need for drastic surface finish improvement on additively manufactured metal components, Voxel Innovations Inc. has developed a novel manufacturing process termed: oscillatory pulsed electrochemical machining (O-PECM). O-PECM is a heat-free, stress-free, surface finishing technique capable of producing sub-200 nm Ra roughness. In O-PECM, a thin envelope of build material is prin ...

    SBIR Phase I 2019 Department of DefenseNavy
  2. Biphase Extended Release Tablet Formulation for Nerve Agent Pretreatment

    SBC: Zymeron Corporation            Topic: CBD181004

    Given the unforeseen/unanticipated use of nerve agents in the battlefield and on the homeland, military personnel can benefit from this oncedaily pretreatment. It may also be desirable to pretreat certain medical and emergency aid personnel following a known/suspected nerveagent attack. Also, a novel, improved PB extended release formulations can be commercialized for the treatment of myasthenia g ...

    SBIR Phase I 2019 Department of DefenseOffice for Chemical and Biological Defense
  3. SecMUASSecure Modular Unmanned Aerial Systems

    SBC: Secmation, LLC            Topic: N191037

    Unmanned Systems, such as Unmanned Aerial Systems (UAS), have become an essential element of US military operations. The rapid advancement of unmanned systems technologies and missions are requiring systems to evolve quickly. While techniques such as rapid prototyping can rapidly field new capabilities, the complexity of the software that controls these unmanned systems makes cybersecurity hardeni ...

    SBIR Phase I 2019 Department of DefenseNavy
  4. Microcapillary Quartz Sensors for Screening Injectability of High Concentration Protein Formulations

    SBC: Qatch Technologies, LLC            Topic: None

    The objective of this SBIR Phase I proposal is to determine the feasibility of viscosity characterization of high concentration protein formulations (HCF) by QATCH’s microcapillary quartz technology. HCFs are non-Newtonian fluids with shear-thinning behavior and they are administered to patients by subcutaneous or muscular injections. The injectability of HCFs depends on the viscosity at high-sh ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  5. Scalable Ultra-Short Pulse Laser System

    SBC: AURA Technologies, LLC            Topic: N183139

    AURA Technologies proposes an innovative method of using an ultra short pulsed laser to create a plasma at a distance.

    SBIR Phase I 2019 Department of DefenseNavy
  6. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  7. Aircraft High-Power Semiconductor Line Contactors

    SBC: HIGHER POWER ENGINEERING            Topic: N05015

    Proposal to access modification of current static transfer switch (STS) product technology for military aircraft operation. High-speed STS in the 120/208 voltage range have been available for government use for several years. However these 60Hz switches will require significant control and packaging modifications for military aircraft installation. Higher Power Engineering (HPE) has significant ...

    SBIR Phase I 2005 Department of DefenseNavy
  8. Automatic Three-Dimensional (3-D) Target Template Generation

    SBC: INTERNATIONAL ASSOCIATION OF VIRTUAL ORGANIZATIONS, INCORPORATED            Topic: N05017

    The US Navy seeks improved capabilities to generate automatically 3-D target template data in support of the Tomahawk Cruise Missile Program. Our collective approach herein is divided between: (1) feature generation using enhancements to the IAVO TrueDEM DEM extraction tool and (2) a new high-level system called TrueTemplate that automatically builds 3-D target templates from the TrueDEM feature ...

    SBIR Phase I 2005 Department of DefenseNavy
  9. Handheld Photoacoustic Chemical Agent and Toxic Industrial Material Detector

    SBC: MANNING APPLIED TECHNOLOGY            Topic: CBD05112

    Manning Applied Technology proposes to develop a handheld infrared spectrometer, ideally suited to detection of airborne chemical agents at and below permissible exposure limits. This approach offers unmatched sensitivity and specificity for detection of all types of chemical vapors. The instrument is modular, rugged, compact and highly sensitive. Volume pricing will be less than $1000 each. ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  10. Automated Mine Neutralization Vehicle

    SBC: NEKTON RESEARCH LLC            Topic: N05128

    We propose a small expendable neutralizer (XN) UUV capable of autonomously neutralizing proud and volume mines. XN will be compatible with legacy launchers and readily deployed from submerged, surface or air platforms. It will be capable of long range submerged deployment, as well as persistent station keeping. It will employ low cost/power guidance and control technology, yet home precisely. ...

    SBIR Phase I 2005 Department of DefenseNavy
US Flag An Official Website of the United States Government