You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Microcapillary Quartz Sensors for Screening Injectability of High Concentration Protein Formulations

    SBC: QATCH TECHNOLOGIES LLC            Topic: None

    The objective of this SBIR Phase I proposal is to determine the feasibility of viscosity characterization of high concentration protein formulations (HCF) by QATCH’s microcapillary quartz technology. HCFs are non-Newtonian fluids with shear-thinning behavior and they are administered to patients by subcutaneous or muscular injections. The injectability of HCFs depends on the viscosity at high-sh ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Biphase Extended Release Tablet Formulation for Nerve Agent Pretreatment

    SBC: ZYMERON CORP            Topic: CBD181004

    Nerve agents exert their toxic effect by binding to and inactivating enzyme acetylcholinesterase, a key enzymatic regulator of cholinergic neurotransmission. The binding becomes irreversible after a varying amount of time with nerve agents and this aging process limits the treatment window of oxime reactivators. To enhance the current antidote treatment of nerve agent autoinjectors, a pyridostigmi ...

    SBIR Phase I 2019 Department of DefenseOffice for Chemical and Biological Defense
  3. The Design of a Low Cost, Rapidly Deployable, Sirborne Harmful Algal Bloom Identification Technology (HABIT) Sensor

    SBC: Aethon Intelligence, LLC            Topic: 834

    The optimal design for a rapidly-deployable, airborne HAB identification sensor requires the determination of the minimum spectral, spatial, dynamic range, and deployment capabilities necessary to achieve the goal of operational detection. This sensor must be capable of rendering a positive identification, with a low false alarm rate, in optical shallow waters, where the bottom is visible in the ...

    SBIR Phase I 2005 Department of Commerce
  4. Nano Alumina Air Filtration Media

    SBC: ARGONIDE CORPORATION, THE            Topic: CBD05102

    NanoCeramr filtration media has been developed for purification of water. The active component is a nano alumina fiber only 2 nanometers in diameter. When dispersed with microglass fibers as part of a non-woven fibrous filter it is capable of retaining sub-micron and nanosize particles smaller than virus while maintaining a high flux. Such media has a dirt holding capacity tens of times greater ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  5. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  6. Handheld Photoacoustic Chemical Agent and Toxic Industrial Material Detector

    SBC: MANNING APPLIED TECHNOLOGY            Topic: CBD05112

    Manning Applied Technology proposes to develop a handheld infrared spectrometer, ideally suited to detection of airborne chemical agents at and below permissible exposure limits. This approach offers unmatched sensitivity and specificity for detection of all types of chemical vapors. The instrument is modular, rugged, compact and highly sensitive. Volume pricing will be less than $1000 each. ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  7. Active Mixing of Polymers in a Dispensing Head

    SBC: nScrypt, Inc.            Topic: N/A

    A method to take three polymers with varying viscosities and mixing those polymers together at the point of interest or more specifically through a micro dispensing nozzle, is being proposed. An active mixing scheme to ensure proper mixing at the pen tip is a feasible approach to this problem. The materials being mixed will not only range in viscosity but also in particle loading, which will be ha ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  8. NANOMETER-SIZE STEP HEIGHT TEST STRUCTURES

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    MCNC PROPOSES A FEASIBILITY STUDY AND EVALUATION OF THREE PROMISING APPROACHES TO THE FABRICATION OF SURFACE TEST STRUCTURES ON SILICON. SURFACE FEATURES ON THE FIRST STRUCTURE WILL BE PRODUCED BY CONTROLLABLY ETCHING THERMALLYGROWN OXIDES. FEATURES ON THE SECOND WILL BE MADE BY ETCHING PIEZOELECTRIC THIN FILMS. USING THE PIEZOELECTRIC FILM AS PART OF A CAPACITOR, STEP-HEIGHT CAN BE VARIED AND PRO ...

    SBIR Phase I 1992 Department of Commerce
  9. FEASIBILITY STUDY FOR THE DEVELOPMENT OF A WATER COLLECTION SYSTEM FOR FLOATING NET PEN AQUACULTURE

    SBC: Minnesota Aquafarms Inc            Topic: N/A

    A SMALL SCALE WASTE COLLECTION SYSTEM WILL BE DESIGNED AND EVALUATED TO DETERMINE POTENTIAL EFFECTIVENESS OF FOUR DIFFERENT DEGREES OF CONTAINMENT OF NET PANS; 5, 50, 60, AND100 PERCENTS. EFFECTIVENESS OF THE COLLECTION UNIT WILL BE EVALUATED BY MONITORING EFFICIENCY OF PHOSPHOROUS, SUSPENDED SOLIDS AND DOB LOAD REMOVAL AT EACH OF THE FOUR CONFIGURATIONS. OTHER OPERATIONAL AND ENVIRONMENTAL PROBLE ...

    SBIR Phase I 1992 Department of Commerce
  10. MOTION COMPENSATING SCALE

    SBC: General Oceanics Inc            Topic: N/A

    THE AIM OF THIS PROJECT IS TO DEVELOP A SCALE FOR WEIGHING LOADS OF UP TO 100 KG. ON MOVING PLATFORMS SUCH AS SHIPS. THE PROBLEM IN THESE SITUATIONS IS THAT ACCELERATION FORCES GENERATED BY THE MOTION OF THE VEHICLE CONSTANTLY VARY THE APPARENT WEIGHT OF ANY OBJECT RESTING ON THE SCALE. THE SOLUTION PROPOSED HERE IS TO USE AN ELECTRONIC SCALE AND COMBINE ITS ELECTRICAL OUTPUT SIGNAL WITH SIGNALS F ...

    SBIR Phase I 1987 Department of Commerce
US Flag An Official Website of the United States Government