Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Biphase Extended Release Tablet Formulation for Nerve Agent Pretreatment

    SBC: Zymeron Corporation            Topic: CBD181004

    Given the unforeseen/unanticipated use of nerve agents in the battlefield and on the homeland, military personnel can benefit from this oncedaily pretreatment. It may also be desirable to pretreat certain medical and emergency aid personnel following a known/suspected nerveagent attack. Also, a novel, improved PB extended release formulations can be commercialized for the treatment of myasthenia g ...

    SBIR Phase I 2019 Department of DefenseOffice for Chemical and Biological Defense
  2. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Microcapillary Quartz Sensors for Screening Injectability of High Concentration Protein Formulations

    SBC: Qatch Technologies, LLC            Topic: None

    The objective of this SBIR Phase I proposal is to determine the feasibility of viscosity characterization of high concentration protein formulations (HCF) by QATCH’s microcapillary quartz technology. HCFs are non-Newtonian fluids with shear-thinning behavior and they are administered to patients by subcutaneous or muscular injections. The injectability of HCFs depends on the viscosity at high-sh ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  4. Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation

    SBC: Nvariate, Inc.            Topic: None

    Modern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  5. In-Field Device for the Autonomous Detection of Harmful Algal Bloom Toxigenic Species and Toxins

    SBC: Lynntech Inc.            Topic: 833

    Harmful algal blooms (HABs) cost the U.S. economy ~$50 million per year. Early detection of blooms and a rapid response by state and federal resource managers are the most effective ways to mitigate the impacts of HABs. However, methods for detecting HAB species and their toxins are laborious, time-consuming and require expensive equipment. To overcome these problems, Lynntech proposes to build ...

    SBIR Phase I 2005 Department of Commerce
  6. Natural Product Antifoulant Protection for Bio-Sensors and Solar Panels

    SBC: NANOHMICS INC            Topic: 845

    Solar panels and bio-optical sensors play a significant role in a number of applications that are of importance to NOAA. Many of these instruments require a high transmission of radiation into the device for it to work properly. Typically, these devices have a coverglass affixed over the active part of the device to protect the sensor or panel from harsh conditions. A problem that presently exi ...

    SBIR Phase I 2005 Department of Commerce
  7. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  8. Distributed Automatic Reconifigurable Transponder (DART)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    his proposal focuses on developing Distributed Automatic Reconfigurable Trasponder (DART) system that is capable of achieving distributed multi-nodal voice/data communication for firefighters. Specifically, Williams-Pyro, Inc. proposes to develop an enhanced prototype of distributed Automated Reconfigurable Intelligent Radios, which consists of a series of distributed nodes that will relay voice t ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  9. Handheld Photoacoustic Chemical Agent and Toxic Industrial Material Detector

    SBC: MANNING APPLIED TECHNOLOGY            Topic: CBD05112

    Manning Applied Technology proposes to develop a handheld infrared spectrometer, ideally suited to detection of airborne chemical agents at and below permissible exposure limits. This approach offers unmatched sensitivity and specificity for detection of all types of chemical vapors. The instrument is modular, rugged, compact and highly sensitive. Volume pricing will be less than $1000 each. ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  10. NANOMETER-SIZE STEP HEIGHT TEST STRUCTURES

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    MCNC PROPOSES A FEASIBILITY STUDY AND EVALUATION OF THREE PROMISING APPROACHES TO THE FABRICATION OF SURFACE TEST STRUCTURES ON SILICON. SURFACE FEATURES ON THE FIRST STRUCTURE WILL BE PRODUCED BY CONTROLLABLY ETCHING THERMALLYGROWN OXIDES. FEATURES ON THE SECOND WILL BE MADE BY ETCHING PIEZOELECTRIC THIN FILMS. USING THE PIEZOELECTRIC FILM AS PART OF A CAPACITOR, STEP-HEIGHT CAN BE VARIED AND PRO ...

    SBIR Phase I 1992 Department of Commerce
US Flag An Official Website of the United States Government