Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  2. Large Solid Angle X-Ray Detector for Electron Microscopy

    SBC: Radiant Detector Technologies, Llc            Topic: N/A

    One of the standard analytical tools on almost all electron microscopes (EM) is an energy dispersive x-ray spectroscopy (EDS) detector used for chemical analysis. However, there are many limitations with the current generation of EDS detectors for EM. The best potential for achieving larger detector active areas, superb energy resolution and an order of magnitude higher count rate compared with co ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  3. Analysis Tools for Detection and Diagnosis of Biological Threats

    SBC: ALPHA-GAMMA TECHNOLOGIES, INC.            Topic: CBD04113

    DNA microarray technology, in combination with statistical and predictive modeling tools, could be used to evaluate thousands of genes against distinct gene expression patterns induced by chemical/biological agents to provide early identification and speed therapeutic intervention. The overall objective of this Phase II effort is to leverage existing public domain resources and commercial tools t ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  4. Handheld Photoacoustic Chemical Agent and Toxic Industrial Material Detector

    SBC: MANNING APPLIED TECHNOLOGY            Topic: CBD05112

    Manning Applied Technology proposes to develop a handheld infrared spectrometer, ideally suited to detection of airborne chemical agents at and below permissible exposure limits. This approach offers unmatched sensitivity and specificity for detection of all types of chemical vapors. The instrument is modular, rugged, compact and highly sensitive. Volume pricing will be less than $1000 each. ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  5. Continuously Variable Attenuated-Phase-Shifted Photomask for Integrated Spectroscopic Sensor Platforms enabled by Optical Nanolithography

    SBC: Redondo Optics, Inc.            Topic: CBD05107

    Redondo Optics Inc. (ROI), a world leader in engineering and manufacturing of leading-edge nano-materials, optical sensors, fiber and integrated optics, and advanced photonics instrumentation proposes to develop and demonstrate for the first time the concept of an etch-less, deep-UV, fully continuously variable attenuated-phase-shifted mask (ConvaPSMT) technology to enable ultra-high resolution, o ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  6. Hermetic Textile Closure Hardware System

    SBC: SIGMA K CORP            Topic: CBD04110

    Effective collective protection fabrics must have a reliable closure system. During our Phase I Work Plan, Sigma-K began developing a Hermetic Textile Closure Hardware (HATCH) system. The HATCH combines both a magnetic and geometric self locking mechanism that will provide a hermetic seal when closed. Our current Phase I successes include developing self closing samples that can provide a hermetic ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  7. Development of a High Sensitivity Laser-Induced Incandescence Instrument for Characterizing Soot and Carbanaceous Particles

    SBC: Artium Technologies Inc            Topic: N/A

    A high sensitivity laser-induced incandescence system is proposed for the detailed characterization of environmental soot. Specifically, innovative approaches have been proposed to (1) reduce the lower detection limit of soot volume fraction and increase the overall measurement range by an order of magnitude from what is currently achievable, and (2) provide PM particle size and number density mea ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government