You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fast Response Fabric Test Setup and Dynamic Fabric Model for BURNSIM

    SBC: ADVANCED COOLING TECHNOLOGIES INC            Topic: AF071025

    Advanced Cooling Technologies, Inc. (ACT) will develop a Fast Response Fabric Test Setup using hot gas impingement conditions by the jet engine exhaust from the Short Take Off and Vertical Landing (STOVL) aircrafts during the Phase I of the proposed SBIR programs. The fabric testing will measure the thermal response and properties of various clothing and Personal Protective Equipment (PPE) fabrics ...

    SBIR Phase I 2007 Department of DefenseAir Force
  2. Shock and Vibration Tolerant Capillary Two-Phase Loops

    SBC: ADVANCED COOLING TECHNOLOGIES INC            Topic: A06193

    Advanced Cooling Technologies, Inc. (ACT), supported by Hamilton Sundstrand, proposes to develop a shock and vibration tolerant Capillary Two-Phase Loop (CTPL) for military vehicle applications. The proposed CTPL differs from the traditional loop heat pipes and capillary pumped loops in the evaporator design, which provides inherent tolerance to shock and vibration. Two additional features are add ...

    SBIR Phase II 2007 Department of DefenseArmy
  3. Robust, Non-Toxic, Corrosion Inhibitor System

    SBC: DYNALENE INC            Topic: N07117

    Proposed is a robust, non-toxic corrosion inhibitor system consisting of novel, stable colloidal, hybrid polymeric or composite materials that are modified to have functional groups covalently or ionically combined with selected corrosion inhibition groups and are mainly prepared by atom transfer radical polymerization. Chain length and number and type of functional groups can be adjusted. Hydroph ...

    SBIR Phase I 2007 Department of DefenseNavy
  4. Advanced Thermo-Fluid Using Hybrid Nanoparticles

    SBC: DYNALENE INC            Topic: OSD04EP8

    The high degree of heat removal from directed energy (DE) weapons requires a next-generation leap in the performance of the heat transfer device/mechanism and also requires a novel thermo-fluid. Neither is available at this time. Nanofluids and Phase Change Materials (PCM) have been developed to increase the thermophysical properties of a base fluid, but the gain is not enough for the extremely hi ...

    SBIR Phase II 2007 Department of Defense
  5. Bulk, Exchange-Coupled Nitride Magnets

    SBC: Advanced Materials Corp            Topic: A06T003

    During Phase I, we have conducted proof-of-principle experiments to fabricate exchange-coupled isotropic permanent magnets with SmFeN-Fe4N compositions employing shock wave consolidation technique. We have also successfully synthesized nearly 100% Fe16N2 in bulk form. Under this Phase II plan, we propose to optimize and further enhance the isotropic exchange-coupled permanent magnets with higher e ...

    STTR Phase II 2007 Department of DefenseArmy
  6. CMC Structures for Exhaust Nozzle Components Based on 3-D Woven Preforms

    SBC: 3TEX, Inc.            Topic: AF071105

    In Phase I of the proposed program we plan to demonstrate the feasibility of manufacturing bladetrack components using an approach that will result in substantial reductions in cost and cycle time compared with conventional 2-D lay-up methods. The approach involves use of a 3-D fiber preform with the shape of the final component, produced by an orthogonal weaving process developed at 3TEX, which ...

    SBIR Phase I 2007 Department of DefenseAir Force
  7. Innovative Joining and Repair Methodologies Using Hybrid Textile Preforms

    SBC: 3TEX, Inc.            Topic: N07T021

    Strength, durability and reliability of commonly used bonded and bolted composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic properties, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature failure of adhesive bonded joints. The proposed work offers substantial enhancement ...

    STTR Phase I 2007 Department of DefenseNavy
  8. Low Reynolds Number, High-Lift Airfoil Design for VTOL UAVs

    SBC: AIRFOILS INC            Topic: A06006

    A complementary theoretical and experimental effort to design and verify high-lift, low pitching-moment airfoils for VTOL UAVs is proposed. In Phase I, an accurate, rapid, test capability is being validated over the range of Reynolds numbers from 50,000 to 500,000 by investigating the E 387 airfoil, the low Reynolds number calibration standard, in The Pennsylvania State University Low-Speed, Low- ...

    SBIR Phase II 2007 Department of DefenseArmy
  9. A Low-Cost and Scalable Dielectric Films

    SBC: APPLIED THIN FILMS, INC            Topic: OSD06EP3

    Compact, high-energy-density capacitors will be the key enabling technology for future pulse-power weapon systems that are being pursued by the DoD. These capacitors convert steady electrical energy into short pulses that are needed to energize loads (required for directed energy weapons). There have been recent advances in chemical double layer capacitors, leading to major advances in energy stor ...

    SBIR Phase I 2007 Department of DefenseAir Force
  10. Multifunctional, Low-Cost, Inorganic Seal Coatings for Radomes

    SBC: APPLIED THIN FILMS, INC            Topic: N05124

    The US Navy and other Department of Defense agencies are facing an urgent need for new and improved radome materials for advanced missile systems. High temperature sealants on radome structures of advanced missile systems is a critical need, since ingress of moisture during missile storage can degrade the electronic components housed within the missile radome. Inorganic coatings are preferred for ...

    SBIR Phase II 2007 Department of DefenseNavy
US Flag An Official Website of the United States Government