You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Integrally 3D Woven/3D Braided Composite Joining Elements For Ship Construction

    SBC: 3TEX, Inc.            Topic: N04093

    During Phase I, 3TEX designed universal, one-piece, 3D woven fiber preforms which can be used as either a “Butt” (H) joint or as a “P” joint as needed. Composite joints were fabricated and tested, demonstrating the benefit of the integral nature of the 3D preforms. 3D stress/strain and crack propagation analysis of composite Π-joint was performed using 3D MOSAIC code. 3D displacement, st ...

    SBIR Phase II 2006 Department of DefenseNavy
  2. 3-D Fiber Reinforced, Thermally Conductive Rotor Sheaths

    SBC: 3TEX, Inc.            Topic: N06T013

    Military helicopters rotors contend with rain, ice, sand, and flying debris. To prevent damage to the expensive blade protective sheaths or coatings are applied to the leading edge of the rotor blades. A 3-D woven composite sheath with high thermal conductivity fibers running through the thickness can offer the best qualities of both metal sheaths and elastomer coatings. Infused with an elastom ...

    STTR Phase I 2006 Department of DefenseNavy
  3. Improved Miller Fasteners Based on 3-D Braided Preforms

    SBC: 3TEX, Inc.            Topic: N06033

    Miller Fasteners made from 2-D laminates represent the state of the art in joining CMC panels to metal frames. Despite its success, the extant Miller fastener design is limited by its construction from a laminate of 2-D fabric. The resultant fastener part has poor interlaminar shear strength, and its manufacture and application entails high machining costs and high material scrap rates. 3TEX, i ...

    SBIR Phase I 2006 Department of DefenseNavy
  4. Automation of Equipment/System Isolation and Safety Tag-out for Maintenance Actions

    SBC: FOARD SYSTEMS DESIGN, INC.            Topic: N05160

    The proposal outlines the use of rapid protyping techniques to create a functional small scale feasibility system and documentation to provide a demonstration of the features needed in a full-scale automated isolation and tag-out system. It will use a highly innovative, patented network control technology that provides a reliable, low cost means to interconnect thousands of remote sensor and cont ...

    SBIR Phase I 2006 Department of DefenseNavy
  5. Adjustable Attachment Device for Aircraft Blankets

    SBC: HILLIER DEVELOPMENT            Topic: N06016

    A simple clamping U bracket to secure itself under pressure on both sides of the aircraft's structural frame ribs. A clamp will be placed on every section where the bonded studs currently exist. A cavity on the bottom of each clamp will hold a stud or other tool to secure the blankets. The outer surface of the bracket will be made of rubber and the inner core will be made of 9255 spring steel, ...

    SBIR Phase I 2006 Department of DefenseNavy
  6. High-Temperature Sizing for Carbon Fiber Reinforced Fluorinated Addition Polyimides

    SBC: HYDROSIZE TECHNOLOGIES, INC.            Topic: N04251

    The objective of this proposal is to develop a sizing system for carbon fiber that has the thermal stability to match or exceed that of the matrix resin and be chemically compatible with the fluorinated addition polyimides. More specifically, the sizing will have the same or similar composition to the matrix resin to promote miscibility and interdiffusion and endcapped with phenylethynyl function ...

    SBIR Phase II 2006 Department of DefenseNavy
  7. Modeling and Prediction of Asymmetric Threat Learning Processes

    SBC: INTERNATIONAL ASSOCIATION OF VIRTUAL ORGANIZATIONS, INCORPORATED            Topic: N06077

    The USN is seeking innovative solutions to model and aid in the prediction of enemy course of action with emphasis on learning, adaptation, and intent. While analysts and strategists are well-versed in tracking threats against conventional military targets, the new asymmetric threats posed by insurgents and terrorist organizations alike, are much more difficult to anticipate. Given the events and ...

    SBIR Phase I 2006 Department of DefenseNavy
  8. Handheld FT-IR/Photoacoustic Chemical Agent Detector

    SBC: MANNING APPLIED TECHNOLOGY            Topic: CBD05112

    Manning Applied Technology proposes development of the MP-100 handheld FT-infrared photoacoustic chemical agent detector, following a highly successful Phase I effort. Chemical attacks and accidents can be mitigated partially by cost-effective sensors. High priority programs will benefit from a sensor compliant to Joint Warning & Reporting Network (JWARN) standards. The device is ideally suited to ...

    SBIR Phase II 2006 Department of DefenseOffice for Chemical and Biological Defense
  9. Small Low Cost Marker for Littoral Mine Neutralization

    SBC: NEKTON RESEARCH LLC            Topic: N04201

    The current effort will development and demonstrate a navigation aiding system for autonomous mine neutralization, comprising a disturbance resistent marker and guidance and control sensor for navigation with respect to the marker. The system will low cost to enable use on expendable vehicles, yet provide the range and homing precision dictated by the CONOPS. This Phase 2 effort will include alg ...

    SBIR Phase II 2006 Department of DefenseNavy
  10. In-Stride Net Penetration Technology

    SBC: NEKTON RESEARCH LLC            Topic: N06054

    We propose investigating new technology for cutting fishing nets, both for commercial fishing or that may be deployed for UUV denial purposes. The envisioned technology is conformal and modular, intended initially for the MRUUV but scalable to larger and smaller vehicles. It is intended as an affordable system requiring minimal space and energy, while providing redundancy in capabilities through ...

    SBIR Phase I 2006 Department of DefenseNavy
US Flag An Official Website of the United States Government