Award Data

A road wheel suspension incorporating a semi-active damper and fast load leveling spring system will be developed for the Expeditionary Fighting Vehicle (EFV). The system will be designed as a replacement for the currently fielded semi-active suspension system in the same foot print, either in early production units or as a retrofit package for incorporation later in the development cycle. A sus ...

Advanced Device Technology, Inc.(ADT) and the University of Iowa, Optical Science and Technology Center are pleased to respond to SBIR solicitation NO5-032 entitled " 1024 x 1024 Snapshot Two-Color Infrared Focal Plane Array for Air-to-Ground Applications". We propose to develop large format focal plane arrays on Strained Layer Superlattice (SLS) material to improve the capability of Navy's Ta ...

N/A

DESCRIPTION (provided by applicant): Rapid and accurate detection and identification of pathogens is crucial for the effective management and treatment of infectious disease. While molecular diagnostic techniques including PCR are a promising approach for rapid and sensitive detection of pathogens, they suffer from a number of technical drawbacks which have slowed their acceptance in the clinic. ...

Three-dimensional woven and braided fiber architectures provide important advantages to composites, including suppression of delamination, high damage tolerance, improved through-the-thickness properties, simplicity and cost-effectiveness of manufacturing complex composite structural components. However, in order to diversify applications and reach high volumes of utilization of these materials in ...

Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson's ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work introduces several nove ...

A laser-based acoustic emission (AE) detection device is proposed for structural stability assessment of buildings in order to provide warning of structural instability or pending collapse. It will help to reduce injuries and fatalities during emergency mitigation operations. This new device will take advantage of innovations in laser ultrasonics, artificial intelligence (AI) and advanced acoustic ...

The feasibility of producing robust miniaturized, broadly tunable mm-wave bandpass filters for space applications is discussed. Current work by the authors has demonstrated very high-Q, broadly tunable "Octave+T" resonators in the 1.2 Ghz to 5.0 Ghz frequency ranges. These resonators have been designed using low-risk, conventional fabrication techniques that are ideally suited to making mm- to cm- ...

Optimized preventative maintenance schedules and in-situ monitoring of vehicle fluid conditions are essential for vehicle reliability, especially when operating in extreme conditions. In the particular case of engine oil, while many types of sensors exist, none directly measure in real time the chemical changes occurring as the oil degrades. A novel, miniature electron spin resonance oil condition ...

DESCRIPTION (provided by applicant): In this proposal, we present a novel approach for the identification and immobilization of a BMP mimetic. We plan to use phage display technology to identify peptides that mimic BMP-like signaling of the BMP receptors. These peptides will be linked to a previously identified high-affinity, collagen-binding peptide. The resulting hybrid molecule will allow contr ...