You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Automated Manufacturing of Composite Materials inc

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: A09031

    Automated fiber placement (AFP) of thermoplastic (TP) composite jackets around large caliber gun barrels and railgun cores has enabled a dramatic increase in lethality while meeting aggressive maneuver requirements. Automated Dynamics has played a central role in the development of TP AFP technology and its use for this application. There is a continuing need to improve safety, temperature capab ...

    SBIR Phase I 2009 Department of DefenseArmy
  2. Acoustic Intercept Receiver for Naval Special Warfare Undersea Vehicles

    SBC: Advanced Acoustic Concepts, Inc.            Topic: N09T012

    The current generation of high-frequency active 3-D acoustic imaging systems presents a challenge to the covert use of Underwater Vehicles (UVs) by Special Forces teams. An acoustic intercept capability is needed to detect active signals before the UV is detected, so that it can vector away from the source. The team of Advanced Acoustic Concepts and Montana State University propose to design and p ...

    STTR Phase I 2009 Department of DefenseNavy
  3. High Speed Compact Vaneaxial Fans

    SBC: ADVANCED ENERGY CONVERSION, LLC            Topic: OSD08E12

    We believe the following improvements are possible in vaneaxial fans: efficiency through improved fan blade design, coupled with the freedom to operate at speeds substantially higher than 3600rpm; reduced size by operating the fan at higher speed allows s

    SBIR Phase I 2009 Department of DefenseNavy
  4. High Temp Standoff Dielectric Antenna Windows Based on 3-D Woven Preforms

    SBC: 3TEX, Inc.            Topic: N08071

    Supersonic cruise missiles offer the ability to hit a time critical target with precision and lethality from long distances, yet the high speed generates temperatures on the exterior surfaces of the missile that can exceed the limitations of high temperature structural metals like titanium. Also, insulation to protect electronics equipment in the missile is required. One solution that demonstrates ...

    SBIR Phase II 2009 Department of DefenseNavy
  5. Hybrid SiC-SiC/C-SiC Thermal Protection Structural Material

    SBC: 3TEX, Inc.            Topic: MDA08020

    Thermal protection materials for ballistic missile kill vehicles must retain strength and stiffness at temperatures around 1500-2000oC in an oxygen rich environment, and isolate payload electronics from excessive heating. Weight is a concern, since lighter weight translates to higher velocity and kinetic energy. Further, the TPS materials must have a long service life, including the ability to w ...

    SBIR Phase I 2009 Department of DefenseMissile Defense Agency
  6. Real-time Adversarial Characterization and Adaptive Software Protection Countermeasures

    SBC: SICORE TECHNOLOGIES INC.            Topic: OSD09IA1

    Rather than continuing to approach cyber security problems in a reactive fashion, ASD proposes to move to a proactive posture; anticipating and eliminating vulnerabilities while also being prepared to effectively and rapidly defend against attacks. Our approach collects data about the attacker as well as the attack, which it processes in real time. The data (observations) is then used by our prote ...

    SBIR Phase I 2009 Department of DefenseAir Force
  7. Collective Protection for Military Working Dogs

    SBC: AGAVE BIOSYSTEMS INC.            Topic: CBD08103

    Shelter enclosures for military working dogs in the event of a CB attack is a technology gap identified by the Joint Requirements Office. Important parameters to consider in the design of protective enclosures include low weight and size to minimize transport requirements; rapid setup; and accommodation of canine physiological and psychological comfort needs while providing protection against CB ...

    SBIR Phase II 2009 Department of DefenseOffice for Chemical and Biological Defense
  8. Enzymatic Degradation of Rocket Propellant Waste

    SBC: AGAVE BIOSYSTEMS INC.            Topic: AF083263

    During the normal course of research, development, and testing by the DOD small quantities of environmentally hazardous waste propellants, explosives, and pyrotechnics (PEP) are produced.  The compliance costs and burden associated with open burn/open detonation operations are considerable, including permit fees, ground water, soil and air sampling, analysis and monitoring of environmental impact ...

    SBIR Phase I 2009 Department of DefenseAir Force
  9. Cell-based High Throughput Screening of Compounds Improving Mitochondrial Energetics

    SBC: AGAVE BIOSYSTEMS INC.            Topic: A08T006

    Improving age-related decrease in cognitive and physical capabilities has tremendous potential for the civilian population and military personnel, including prolonged aptitude of highly-trained military personnel and lowering of healthcare costs. Mitocho

    STTR Phase II 2009 Department of DefenseArmy
  10. Point-of-Care Diagnostic for Acute Q Fever using LAMP

    SBC: AGAVE BIOSYSTEMS INC.            Topic: A08178

    Q fever is caused by the bacterium Coxiella burnetii and presents with acute symptoms indistinguishable from many other blood infections. Chronic infection, however, can result in endocarditis, with a high mortality rate (up to 60% of chronic Q fever cases) and requiring open-heart surgery to repair substantial valve damage in many cases. Q fever can be airborne or tick-borne, and is associated ...

    SBIR Phase I 2009 Department of DefenseArmy
US Flag An Official Website of the United States Government