Award Data

The recent emergence of the Silicon Drift detector (SDD), for use in energy dispersive x-ray spectrometry (EDS), has made possible x-ray event streams with count rates as high as 1-10 Mcps. A problem with existing digital signal processing, as applied to SDDs, is the significant presence of coincidence peaks above the x-ray background. These coincidence peaks occur with amplitudes comparable to lo ...

Shelter enclosures for military working dogs in the event of a CB attack is a technology gap identified by the Joint Requirements Office. Important parameters to consider in the design of protective enclosures include low weight and size to minimize transport requirements; rapid setup; and accommodation of canine physiological and psychological comfort needs while providing protection against CB ...

In the proposed Phase I SBIR program, Aymont Technology and CoolCAD Electronics will design and demonstrate prototype silicon carbide (SiC) avalanche photodiodes (APD) specifically designed for high-efficiency, single-photon counting of 121.6 nm Lyman-alpha photons. This detector will be provided to relevant personnel at NIST for calibration and testing. Both discrete APDs and arrays will be used ...

This is an SBIR Phase II proposal to develop a tactile refreshable computer display prototype (TRCD) that will support multiple tactile alphabets (e.g. ELIA, braille, and Roman), multiple lines of text, and graphics to benefit the more than 1.8 million blind Americans. Commercially available TRCDs are expensive (~$12,000, or $19 per actuator), provide only one line of text (with 640 actuators) and ...

A wireless sensor and actuator network capable of providing precision time synchronization between the nodes of the network will be developed. The IEEE 1451.0 smart transducer interface and IEEE 1588 time synchronization standards will be combined, with additional software and hardware to provide synchronization between the clocks on the Wireless Transducer Interface Modules (WTIM) sensors/actuato ...

NanoGriptech LLC proposes to develop repeatable skin adhesives using technology inspired by the feet of geckos and insects. These adhesives will be integrated into full facemask respirators to reduce or replace head harness straps, which are currently used to hold the facemasks in place. Expected benefits are improved fit, resistance to shifting, improved sealing, and reduced discomfort and tiss ...

This proposal describes how a very low cost hyperspectral imager can be built. The key to the low cost is the use of a commercially available thermal camera based on uncooled microbolometer as the detecting element. An interferometer is placed in front of the camera to produce the spectrum. Each frame of the camera captures one point of the interferogram, producing a hyperspectral image at 4cm- ...

Being proposed is a way to integrate the inputs from multiple sensors and different types of sensors to produce a map of the chemical threat. This technique weights every input based on type of sensor, minimum detectable level, health and status of each instrument, and time and position errors. The Sensor Netting Algorithm (SNA) will be based on tomography with weighting factors. The output will ...