You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Ground-based Water Vapor Profiling Lidar

    SBC: Bennett Aerospace, Inc.            Topic: 832

    The objective of Phase II is to continue our efforts from the Phase I project and perform in-depth testing of technologies critical to achieving the required level of measurement performance. The Phase II project will involve the design of the NOAA water vapor profiling lidar and testing of component parts, seeking external sources of funding for the systems (for Phase III) and further creating a ...

    SBIR Phase II 2010 Department of Commerce
  2. Electrically-Pumped III-Nitride Intersubband lasers

    SBC: KYMA TECHNOLOGIES, INC.            Topic: SB082049

    Kyma Technologies, a leading supplier of low defect density GaN substrates, is teamed together with the three subcontractors at Princeton University, Lehigh University and Purdue University where some of the best lattice-matched quaternary (In,Ga,Al)N or ternary structures in the world have been produced, to propose the development of the world¡¦s first high-performance III-N quantum cascade las ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  3. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  4. In-Stride AUV Launch and Recovery System

    SBC: NEKTON RESEARCH LLC            Topic: SB041004

    We propose development and demonstration of key elements of the in-stride launch and recovery system (LRS) we analyzed in Phase I to provide capabilities of a modular, scalable LRS that can readily and quickly be mounted for small UUV launch and recovery using a range of sizes and types of larger UUV. Deliverables include in-water demonstration of autonomous recovery and of data and power transmi ...

    SBIR Phase II 2006 Department of DefenseDefense Advanced Research Projects Agency
  5. User-Friendly 3D Environmental Profiler AUV

    SBC: NEKTON RESEARCH LLC            Topic: 813

    We propose Ranger ES, a low cost, autonomous underwater vehicle (AUV) for three-dimensional profiling and water samplings of chemical, physical, and biological parameters of oceanic and fresh waters. The AUV will be programmable by point and click to analyze a volume of water continuously for the selected parameters. After returning for pickup after a day¿s run, it will download its data into a ...

    SBIR Phase I 2006 Department of Commerce
  6. NANOMETER-SIZE STEP HEIGHT TEST STRUCTURES

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    MCNC PROPOSES A FEASIBILITY STUDY AND EVALUATION OF THREE PROMISING APPROACHES TO THE FABRICATION OF SURFACE TEST STRUCTURES ON SILICON. SURFACE FEATURES ON THE FIRST STRUCTURE WILL BE PRODUCED BY CONTROLLABLY ETCHING THERMALLYGROWN OXIDES. FEATURES ON THE SECOND WILL BE MADE BY ETCHING PIEZOELECTRIC THIN FILMS. USING THE PIEZOELECTRIC FILM AS PART OF A CAPACITOR, STEP-HEIGHT CAN BE VARIED AND PRO ...

    SBIR Phase I 1992 Department of Commerce
  7. DEMONSTRABLY CORRECT COMPILATION (DCC)

    SBC: Baldwin/mchugh Assoc., Inc.            Topic: N/A

    A TECHNIQUE FOR OBTAINING TRUSTWORTHY COMPILATION BASED ON A COMPILATION CHECKER (SIMILAR TO A PROOF CHECKER) IS PROPOSED. THE TRANSFORMATIONS USED IN A COMPILER WILL BE FORMALLY SPECIFIED AND VERIFIED USING INTERPRETER EQUIVALENCE METHODS. THE COMPILER WILL BE INSTRUMENTED TO PRODUCE A TRACE OF THE TRANSFORMATIONS APPLIED IN THE COMPILATION OF A GIVEN PROGRAM. THE COMPILATION CHECKER WILL VALIDAT ...

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  8. HYBRID DIFFRACTIVE/REFRACTIVE RELAY SYSTEM FOR HEAD MOUNTED DISPLAYS

    SBC: DIGITAL OPTICS CORP.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government