The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.
SBC: INSITUTEC, INC. Topic: N/A
The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
SBC: Torch Technologies, Inc. Topic: CBD05110
To properly measure (and understand) the performance of a standoff detector, properties of the challenge cloud must be known. Meteorological models, such as HPAC and VLSTRACK, have proven to be reasonably good tools for predicting cloud properties. However, a problem with these tools is that they deliver ensemble averages and may not describe a specific cloud to the detail required. The Dugway ...SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
SBC: Advanced Technologies/Laboratories Intl Topic: N/A
MCNC PROPOSES A FEASIBILITY STUDY AND EVALUATION OF THREE PROMISING APPROACHES TO THE FABRICATION OF SURFACE TEST STRUCTURES ON SILICON. SURFACE FEATURES ON THE FIRST STRUCTURE WILL BE PRODUCED BY CONTROLLABLY ETCHING THERMALLYGROWN OXIDES. FEATURES ON THE SECOND WILL BE MADE BY ETCHING PIEZOELECTRIC THIN FILMS. USING THE PIEZOELECTRIC FILM AS PART OF A CAPACITOR, STEP-HEIGHT CAN BE VARIED AND PRO ...SBIR Phase I 1992 Department of Commerce