List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. TRACKING PROGRESSIVE FRACTURE\TOWARDS RETIREMENT FOR CAUSE

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    ONE OF THE MOST COMMON PROBLEMS IN THE FIELDS OF SYSTEM DYNAMICS AND PATTERN RECOGNITION IS THE IDENTIFICATION OF THE DYNAMIC CHARACTERISTICS OF A SYSTEM ARE KNOWN THAN AN ACCURATE MATHERMATICAL MODEL COULD BE CONSTRUCTED AND A BETTER UNDERSTANDING OF THE BEHAVIOR OF THE SYSTEM COULD BE DEVELOPED. THIS WOULD HELP IMPROVE ITS DESIGN AND PERFORMANCE, MADE ITS IDENTIFICATION EASIER, FACILITATE INSPEC ...

    SBIR Phase II 1984 Department of DefenseAir Force
  2. ELIMINATION OF EXCESSIVE SURFACE DEFECTS IN GAAS IC MATERIALUSING NON-CONTACT POLISHING

    SBC: Aracor            Topic: N/A

    THE EXTENSION OF A NON-CONTACT POLISHING TECHNIQUE PREVIOUSLY DEVELOPED FOR IT-VI COMPOUNDS, IS PROPOSED FOR (100) GAAS WAFERS INTEGRATED CIRCUIT APPLICATIONS IN MIND. AN INITIAL TASK WILL BE TO CHARACTERIZE SUCH NON-CONTACT POLISHED SURFACES AND COMPARE THEM WITH CONVENTIONALLY POLISHED SURFACES. FOLLOWING SUCCESSFUL DEVELOPMENT OF THE TECHNIQUE, WE WILL INVESTIGATE THE FEASIBILITY OF SCALE-UP FO ...

    SBIR Phase II 1984 Department of DefenseDefense Advanced Research Projects Agency
  3. SPECTROMETERS

    SBC: Aracor            Topic: N/A

    FOR THE CLASS OF DNA NUCLEAR WEAPONS EFFECTS SIMULATOR KNOWN AS THE PLASMA RADIATING SOURCE (PRS), HIGH RESOLUTION X-RAY SPECTROSCOPY DIAGNOSTIC MEASUREMENTS PROVIDE CRITICAL INFORMATION BOTH FOR CHARACTERIZATION OF THE TEST-OBJECT RADIATION ENVIRONMENT AND FOR OPTIMIZATION OF THE SOURCE. PRESENT PRS HIGH RESOLUTION X-RAY SPECTROMETERS RECORD DATA ON PHOTOGRAPHIC FILM, THE PROCESSING AND ANALYSIS ...

    SBIR Phase I 1984 Department of DefenseDefense Threat Reduction Agency
  4. COMMERCIAL SAPPHIRE SURFACES CONTAIN BURIED DAMAGE WHICH HAS A DELETERIOUS INFLUENCE ON SOS LAYERS GROWN THEREON.

    SBC: Aracor            Topic: N/A

    COMMERCIAL SAPPHIRE SURFACES CONTAIN BURIED DAMAGE WHICH HAS A DELETERIOUS INFLUENCE ON SOS LAYERS GROWN THEREON. THE DEFECTS IN THE SILICON LAYERS RESULT IN A REDUCED YIELD OF DEVICES AND PERFORMANCE LIMITATIONS. MUCH OF THE DAMAGE IN THE SAPPHIRE SURFACE IS PRODUCED BY THE POLISHING STEP, WHICH EMPLOYS AN ABRASIVE PAD IN CONTACT WITH THE SAPPHIRE SURFACE. AN IMPROVED POLISHING PROCESS HAS BEEN E ...

    SBIR Phase I 1984 Department of DefenseDefense Threat Reduction Agency
  5. CHARACTERIZATIONOF SEMICONDUCTORS WITH RESOLUTION DOWN TO LUM

    SBC: Aracor            Topic: N/A

    NEAR-SURFACE DEFECTS IN SEMICONDUCTORS HAVE A PRIMARY INFLUENCE UPON DEVICE PROPERTIES, PARTICULARLY THE YIELD. IT WOULD BE VERY USEFUL TO BE ABLE TO MAP SPATIALLY THE DENSITY AND TYPE OF DEFECTS NEAR A SEMICONDUCTOR SURFACE EITHER AS A WAFER QUALITY CONTROL STEP OR TO SUPPORT DEVICE PHYSICAL EXPERIMENTS. CONVENTIONAL TECHNIQUES USED FOR THIS PURPOSE SUFFER FROM ONE OR MORE OF THE FOLLOWING LIMITA ...

    SBIR Phase I 1984 Department of DefenseAir Force
  6. ECCM TECHNOLOGY HAS A GROWING NEED FOR IMPROVED HIGH-STABILITY TIME-FREQUENCY STANDARDS.

    SBC: Aracor            Topic: N/A

    ECCM TECHNOLOGY HAS A GROWING NEED FOR IMPROVED HIGH-STABILITY TIME-FREQUENCY STANDARDS. THE MAIN STANDARDS CURRENTLY IN COMMON USE UTILIZE QUARTZ-CRYSTAL OSCILLATORS CUT TO THE AT ORIENTATION. A PRIMARY CANDIDATE FOR MEETING THE REQUIREMENT FOR IMPROVED TIME/FREQUENCY STANDARDS IS SC-CUT QUARTZ, WHICH OFFERS MAJOR IMPROVEMENTS IN STABILITY AND PERFORMANCE OVER AT-CUT QUARTZ OSCILLATORS. UNFORTUNA ...

    SBIR Phase I 1984 Department of DefenseArmy
  7. A NEW RADIOGRAPHIC CORROSION INSPECTION CAPABILITY

    SBC: Aracor            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of DefenseAir Force
  8. A SYSTEM IDENTIFICATION TECHNICAL IS PROPOSED FOR NON-DESTRUCTIVE TEST TO DETECT UNBOUNDS IN LARGE BONDED COMPONENTS.

    SBC: Advanced Technology & Research            Topic: N/A

    A SYSTEM IDENTIFICATION TECHNICAL IS PROPOSED FOR NON-DESTRUCTIVE TEST TO DETECT UNBOUNDS IN LARGE BONDED COMPONENTS. THE TECHNIQUE USES THE SYSTEM'S TIME RESPONSE DATA DUE TO RANDOM INPUT EXCITATION. SYSTEM'S EIGENVALUES AND EIGENVECTORS ARE RETRIEVED FROM THE TIME RESPONSES AND USED FOR THE CONSTRUCTION OF ACCURATE SYSTEM MATHEMATICAL MODELS. SYSTEM'S CHANGE DUE TO CRACKS, VOIDS, UNBONDS BETWEEN ...

    SBIR Phase I 1984 Department of DefenseNavy
  9. METHODS ARE DESPERATELY NEEDED TO DISCERN THE STRUCTURAL INTEGRITY OF CRITICAL COMPONENTS OF WEAPON SYSTEMS SUCH AS PRESSURE VESSEL CASES.

    SBC: Advanced Technology & Research            Topic: N/A

    METHODS ARE DESPERATELY NEEDED TO DISCERN THE STRUCTURAL INTEGRITY OF CRITICAL COMPONENTS OF WEAPON SYSTEMS SUCH AS PRESSURE VESSEL CASES. AT THIS TIME, NO TECHNIQUE EXISTS WHICH PERMITS A GLOBAL MONITORING OF THE OPERATIONAL READINESS OF ANY STRUCTURES, INCLUDING COMPOSITE MOTOR CASES. THE RANDOMDEC PROCEDURE, WHICH IS PLANNED TO BE UTILIZED UNDER THIS PROPOSED STUDY, APPEARS TO HAVE THE CAPABILI ...

    SBIR Phase I 1984 Department of DefenseNavy
  10. AUTOMATIC RECOGNITION

    SBC: Akm Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government