List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. SURVEY AND EVALUATION OF TECHNIQUES FOR MEASUREMENT OF ACOUSTIC SENSOR POSITION IN LONG TOWED ARRAYS, USING INTERNAL OR EXTERNAL DATA OR

    SBC: ADAPTIVE METHODS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of DefenseNavy
  2. NONDESTRUCTIVE EVALUATION OF CERAMIC USING SYSTEM IDENTIFICATION

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    CERAMIC MATERIALS ARE UNDER CONSIDERATION FOR STRUCTURAL COMPONENTS IN ADVANCED HEAT ENGINES FOR SEVERAL REASONS. THE PRIMARY MOTIVATION IS THEIR HIGH STRENGTH UNDER SIGNIFICANTLY INCREASING OPERATING TEMPERATURES. THE USE OF THESE HIGH TEMPERATURE MATERIALS WILL PERMIT BETTER FUEL EFFICIENCY AND REDUCE COOLING SYSTEM REQUIREMENTS. DUE TO THEIR ATOMIC STRUCTURE, CERAMICS INTRINSICALLY EXHIBIT LOW ...

    SBIR Phase II 1991 Department of DefenseNavy
  3. SENSOR BASED SERVO CONTROL FOR A MOBILE ROBOT MANIPULATOR

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of DefenseArmy
  4. A HIGH RELIABILITY OXYGEN/JTX CRYOGENIC REFRIGERATOR

    SBC: Aerospace Design & Development, Inc.            Topic: N/A

    USING TECHNOLOGY NOW IN EXISTENCE AND NOW BEING DEVELOPED IT IS POSSIBLE TO BUILD A HIGH RELIABILITY, CRYOGENIC OXYGEN REFRIGERATOR. THE TEMPERATURE RANGE IN WHICH THE REFRIGERATOR WOULD FUNCTION WOULD BE CONTROLLABLE BETWEEN 70 AND 140 KELVIN. THE BASIS FOR THIS REFRIGERATION CYCLE WOULD BE CERAMIC ELECTROLYTE TECHNOLOGY BY WHICH OXYGEN CAN BE COMPRESSED USING AN ELECTRIC POTENTIAL ACROSS THE CER ...

    SBIR Phase I 1991 Department of DefenseMissile Defense Agency
  5. MODULAR SOLDIER'S COMPUTER (MSC)

    SBC: Agilis Corp.            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of DefenseArmy
  6. SENSOR FUSION USING ELECTRO-OPTIC AND RADAR SIGNAL MODULATION DATA

    SBC: ZIMMERMAN ASSOC., INC.            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of DefenseNavy
  7. UGT INSTRUMENTATION FOR ELECTRICAL PARAMETER MEASUREMENT

    SBC: APTEK, Inc.            Topic: N/A

    THIS PROGRAM WILL DEVELOP FIELD INSTRUMENTATION SUITABLE FOR USE IN AN UNDERGROUND (UGT) OR ABOVEGROUND (AGT) RADIATION TEST ENVIRONMENT, FOR THE MEASUREMENT OF ELECTRICAL PROPERTIES OF MATERIALS AS THEY RECOVER FROM IRRADIATION. THE EFFORT WILL CONSIST OF SAMPLE HOLDER AND INSTRUMENTATION DESIGN, RESPONSE ANALYSIS, AND THE FABRICATION OF A LABORATORY TEST SETUP TO SHOW TECHNIQUE FEASIBILITY.

    SBIR Phase II 1991 Department of DefenseDefense Threat Reduction Agency
  8. SENSITIVE LOW Z STRAIN GAGE

    SBC: APTEK, Inc.            Topic: N/A

    THIS ACTIVITY WILL INVESTIGATE THE USE OF PVDF FILM FOR USE AS A LOW Z STRAIN GAGE. THE PVDF MATERIAL IS AN ORDER OF MAGNITUDE MORE SENSITIVE THAN PZT AS A PIEZOELECTRIC MATERIAL AND HAS AN ATOMIC NUMBER MUCH LOWER (LOW Z) THAN PRESENT RESISTIVE STRAIN GAGE MATERIALS. THEREFORE, PVDF AS A STRAIN GAGE WILL BE CAPABLE OF MEASURING MUCH LOWER LEVELS OF STRAIN THAN PRESENT GAGING TECHNIQUES, AND WILL ...

    SBIR Phase II 1991 Department of DefenseDefense Threat Reduction Agency
  9. CONCRETE SPALL PROTECTION DEVELOPMENT

    SBC: APTEK, Inc.            Topic: N/A

    HIGH PRESSURE BLAST OR IMPACT LOADS ON THE OUTSIDE OF A CONCRETE WALL CAN CAUSE SPALLING OF THE INSIDE OF THE WALL. FLYING SPALL FRAGMENTS ARE DANGEROUS TO PERSONAL AND EQUIPMENT INSIDE CONCRETE BUILDINGS SUBJECTED TO ATTACK OR ACCIDENTIAL EXPLOSION. THIS PROPOSAL DETAILS THE LOGICAL, STEP-BY-STEP DEVELOPMENT OF A SPALL PROTECTION SYSTEM THAT CAN BE APPLIED TO NEW AND EXISTING CONCRETE WALLS. THE ...

    SBIR Phase II 1991 Department of DefenseAir Force
  10. AN OPTIMAL MISSILE SHAPE DESIGN PACKAGE

    SBC: APTEK, Inc.            Topic: N/A

    THE OVERALL GOAL OF PHASE I AND PHASE II IS TO DEVELOP SOFTWARE THAT WILL FIND THE OPTIMAL SIZE AND SHAPE OF MISSILE DESIGNS ACCORDING TO USER DEFINED DESIGN CRITERIA. PHASE I WILL SHOW THE FEASIBILITY OF MISSILE SHAPE DESIGN OPTIMIZATION BY COMBINING A GEOMETRIC MODELER, OPTIMIZATION SOFTWARE, AND FREE-FORM DEFORMATION WITH AN ANALYSIS MODULE. THE PHASE I ANALYSIS MODULE WILL CONTAIN AERODYNAMICS ...

    SBIR Phase II 1991 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government