List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Reuse Support Tools for Automated Constructino of Software Systems

    SBC: Advanced Systems Technology, Inc.            Topic: N/A

    Reuse in software engineering is an exciting concept that has yet to be reliably implemented. The number of program subroutines that are truly generic (and therefore applicable across all applications) is limited. However, there are specific applications that are required by many organizations, albeit with a set of constraints specific to each organization. This project proposes to design a too ...

    SBIR Phase I 1995 Department of Commerce
  2. Gulliver Miniature Guarded Hot Plate Apparatus

    SBC: Drf R&d, Inc.            Topic: N/A

    It is proposed to develop a miniature guarded hot plate apparatus that can be used to determine the thermal conductivity or thermal resistance of very small specimens (1 to 3 cm square) of thermal insulation materials over a temperature range from at least -40 degrees Celsius to +65 degrees Celsius, with the apparatus having the capability to carry out measurements under controlled environments of ...

    SBIR Phase I 1995 Department of Commerce
  3. Development of a Commercially Viable Equivalence Ratio Meter

    SBC: HUGHES ASSOC., INC.            Topic: N/A

    A combustion environment can be described by a characteristic fuel-to-air ratio normalized by the stoichiometric fuel-to-air ratio, otherwise defined as an equivalence ratio, _. The equivalence ratio is used extensively in a wide range of combustion fields from fundamental flame studies, to full-scale fire testing, to power plant operations. There have been basically two methods for calculating ...

    SBIR Phase I 1995 Department of Commerce
  4. Accessible Virtual Reality for Machinist Training Modules

    SBC: Microcompatibles, Inc.            Topic: N/A

    This proposal will emphasize outfitting a virtual classroom and creating a skills (CNC) oriented training program. The virtual classroom will involve contextual learning using a realistic simulation of the manufacturing environment. The simulation will have all of the characteristics of a machine shop, but will allow the learner to explore and experiment ("discover") in ways that would not be pr ...

    SBIR Phase I 1995 Department of Commerce
  5. Ultrasonic Inspection for Neck/Shoulder Cracks in Aluminum Gas Cylinders

    SBC: NewTek            Topic: N/A

    Recent catastrophic failures of Self Contained Underwater Breathing Apparatus (SCUBA) aluminum gas cylinders and similar air tanks have generated the need for a highly reliable, low cost inspection method to insure the integrity of these tanks. The failures of these tanks have been the result of crack formation in the neck and shoulder area. The cracks originate from the interior wall and can re ...

    SBIR Phase I 1995 Department of Commerce
  6. A SENSITIVE, HIGH RESOLUTION IMAGING DETECTOR FOR COLD NEUTRONS

    SBC: NewTek            Topic: N/A

    A NOVEL PHOTOSTIMULABLE PHOSPHOR IMAGING TECHNIQUE IS PROPOSED TO REPLACE BULKY COUNTING SYSTEMS CURRENTLY USED IN NEUTRON DIFFRACTION AND SCATTERING INVESTIGATIONS. THE SIZE AND SHAPE OF THE PROPOSED DETECTOR CAN BE VARIED TO MAKE IT POSSIBLE TO MOVE THE DETECTION SYSTEM CLOSER TO THE SCATTERING SAMPLE, THEREBY INCREASING THE NEUTRONS AVAILABLE FOR DETECTION AND SHRINKING THE SIZE OF THE EXPERIME ...

    SBIR Phase II 1995 Department of Commerce
  7. Innovative Magnetic NDE System for Micromagnetic Imaging

    SBC: SFA, INC.            Topic: N/A

    This project is investigating the application of magnetic recording and micromachine technologies to the development of a novel magnetic nondestructive evaluation (NDE) system. Magnetic NDE methods based on Barkhausen signal detection and analysis can provide valuable information about the state of stress of steel materials. However, Barkhausen signals do not appear to be correlated with the ext ...

    SBIR Phase I 1995 Department of Commerce
  8. Propulsion Capability for 3-Inch Submarine Countermeasures

    SBC: ZIMMERMAN ASSOC., INC.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseNavy
  9. Integration of Flat-Plate X-Band and Wideband Antennas for Surveillance/Identification

    SBC: ATLANTIC AEROSPACE ELECTRONICS CORP.            Topic: N/A

    This proposal presents a unique and innovative approach to designing and realizing an integrated aperture made up of a wideband, nominally 0. 5 to 2. 0 GHz, array and a precision X-band array. AAEC proposes to realize the wideband element by a rigid wire structure. Second, AAEC proposes a design tool based on well validated computational electromagnetics codes that actually relate changes in the n ...

    SBIR Phase I 1995 Department of DefenseNavy
  10. Dental Conduction Hearing for Divers

    SBC: Audiodontics LLC            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government