For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Optimizing Staff Scheduling by Monte Carlo Simulation

    SBC: ACME EXPRESS, INC.            Topic: N/A


    SBIR Phase I 1995 Department of Health and Human Services
  2. Advanced Analytical Techniques for Determining Metal Speciation in Contaminated Soils

    SBC: ADAM INSTRUMENT CO., INC.            Topic: N/A


    SBIR Phase I 1995 Department of DefenseArmy
  3. Fracture Mechanics Based Life Prediction of High Temperature Composite Joints


    An important aspect in the design of aircraft structure and aeropropulsion components made of high temperature composite materials is damage tolerance and life prediction. Many components contain joints between composites and metals. There is a need to develop methods for predicting life of such components and then implementing the methods in software for design calculations on computers. The prop ...

    SBIR Phase II 1995 Department of DefenseAir Force
  4. Improved Barrier Coatings for Continuous Silicon-Carbide Fibers in Ceramic Composites

    SBC: Advanced Ceramics Corp.            Topic: N/A

    A new barrier coating for protection of continuous SiC fibers in composites up to 1500C will be applied to continuous fiber tows by chemical vapor deposition (CVD) in commercial apparatus. Current SiC fibers, and currently used BN barrier coatings, are restricted to use below 1100C and are unsuitable for use in turbine combustors and other high temperature applications. Two CVD compositions in the ...

    SBIR Phase II 1995 National Aeronautics and Space Administration
  5. Micromachined Silicon Temperature Extreme Sensor Requiring No Power Source


    The objective of this research is to design a micromechanical temperature sensor capable of recording temperature extremes experienced beyond a preset value without the use of electrical power. The temperature sensor's memory will be mechanically induced. The sensor will be either in an electronically resettable form, or, less expensively, in a disposable form. The proposed device will be microfab ...

    SBIR Phase II 1995 Department of DefenseDefense Advanced Research Projects Agency
  6. Microfabricated Silicon Carbide Heat Flux Sensor


    The goal of this project is to develop new high-temperature heat flux sensors for heat transfer measurements in turbomachinery. The following obejctives will be pursued. Pototype sensors will be demonstrated which function at temperatures as high as 600C with a frequency response up to 50kHz. Using microfabrication techniques, miniature sensors will be produced for better than 0.1 mm spatial resol ...

    SBIR Phase II 1995 Department of DefenseAir Force
  7. Process Optimization Through Discovery and Integration of Materials and Processing Properties

    SBC: Ai Ware, Inc.            Topic: N/A

    The objective is to increase the productivity of materials research by automating the infrastructure of such efforts. Global competition in manufacturing, limitations in fiscal and physical resources, ecological constraints, and technically challenging mission goals require that productivity be increased in the design, fabrication, and utilization of new or improved materials. The technical approa ...

    SBIR Phase II 1995 Department of DefenseAir Force
  8. LO Rotor Blade De-Ice Systems Evaluation

    SBC: ANALYTIC DESIGNS INC            Topic: N/A

    This proposal investigates candidate main rotor blade de-icing systems which offer signature reduction capabilities. In comparison to traditional mechanical boot style de-icing systems, electrical de-icing systems are considered. One such candidate is a novel electrical thin film resistive de-icing system, which shows potential to lower the RCS levels associated with main rotor blade systems. This ...

    SBIR Phase II 1995 Department of DefenseArmy
  9. Low-Cost Antenna with Low RCS for RF Anechoic Chambers

    SBC: ANALYTIC DESIGNS INC            Topic: N/A

    Today's high performance anechoic chambers consist of a wall of various feed antennas directed at the object under test. With all of these antennas covering the chamber wall, the anechoic performance of the wall will be impaired by the RCS of the antennas themselves. Current illumination requirements dictate large bandwidths (.5-18GHz) and control of polarization, gain and beamwidth antenna para ...

    SBIR Phase I 1995 Department of DefenseAir Force
  10. Online Urea Monitoring During Hemodialysis

    SBC: ANATRACE, INC.            Topic: N/A

    Often with little knowledge of the per treatment efficiency as related to the individual patients needs, Hemodialysis is prescribed for over 400,000 patients worldwide. A methodology and apparatus are proposed for the quantification of urea removal during treatment. A prototype urea sensor will be developed based on the marriage of immobilized enzyme and ion selective electrode technologies. The s ...

    SBIR Phase II 1995 Department of Health and Human Services

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government