You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Selenium Coated CMOS Image Sensor

    SBC: Adept Ic Design            Topic: N/A

    We propose to develop sensor technology capable of high resolution imaging of electromagnetic radiation in the energy spectrum spanning the ultraviolet to x-rays. Phase I calls for the fabrication of small scale image sensors. These sensors are fabricated from CMOS arrays, coated with selenium and then a conductive electrode. These sensors will undergo testing and performance evaluation for both x ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  2. Manufacturing Process for Vertical Cavity Surface Lasers

    SBC: Alpha Photonics, Inc.            Topic: N/A

    A manufacturing process for the Vertical Cavity Surface Emitting Lasers (VCSELs) will be developed based on real time in situ monitoring and control. A fundamental challenge in spurring the wide acceptance of VCSELs lies in the development of a high yield crystal growth process. The study will focus on the following areas: the installation of complementary optical techniques such as pyrometric int ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  3. HIGH FIELD OF REGARD GIMBAL FOR LASER COMMUNICATIONS AND OTHER STEERED SYSTEMS

    SBC: AstroTerra Corporation            Topic: N/A

    The primary objective of this Phase I technical effort is to desgin, prototype and measure the performance of a novel compact gimbal that is specifically designed for high precision pointing of electro-optic systems from mobile platforms. This novel gimbal consists of two rotating joints oriented at an angle of 47.5 degrees from each other. By rotating these two joints through 360 degrees, the gim ...

    SBIR Phase II 1995 Department of DefenseMissile Defense Agency
  4. Three-Dimensional Volumetric Display

    SBC: AstroTerra Corporation            Topic: N/A

    The objective of this effort is to demonstrate a novel method of generating a volumetric three-dimensional display. This method uses intersecting lasers in a gaseous medium to cause fluorescence from desired points. By scanning a series of intersection points in either a rastor or vector scan in a timeless than the eye's 15 Hz refresh rate, a true three-dimensional image can be generated. The idea ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  5. Monolithic Optical Fiber-to-Fiber Array Connector

    SBC: Berkeley Optics Company            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  6. High Thermal Conductivity Polymeric Adhesive

    SBC: Browne & Associates            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  7. Refractive Index Gradient Lens Via Sol Gel Process

    SBC: Chemat Technology, Inc.            Topic: N/A

    The optical systems are widely employed in military and civil equipment. The conventional optical system employs homogeneous materials which sometime are not sufficient to produce an adequate image. In this research, we propose to fabricate axial GRIN glasses via the layering of sol-gel solutions. The proper sol-gel solutions will be synthesized, the technique to form axial GRIN solutions will be ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  8. Hybrid Phased Array Systems

    SBC: CONDUCTUS, INC.            Topic: N/A

    IN PHASE I OF THE PROPOSED EFFORT, A HYBRID SUPERCONDUCTING/ SEMICONDUCTING COMMUNICATION SUBSYSTEM FOR K AND V BAND APPLICATIONS WILL BE ANALYZED AND DESIGNED. THE SYSTEM WILL CONSIST OF HIGH TEMPERATURE SUPERCONDUCTING (HTS) FEED NETWORKS, HTS PHASE SHIFTERS, AND A CONVENTIONAL AMPLIFIER IN A PHASED ARRAY FRAMEWORK. DIGITAL POST PROCESSING (ANALOG TO DIGITAL CONVERSION COUPLED WITH A FAST MEMORY ...

    SBIR Phase II 1995 Department of DefenseMissile Defense Agency
  9. LOW COST SOLID STATE LASER

    SBC: Deacon Research            Topic: N/A

    An inexpensive blue laser source is needed to satisfy the market for high density data storage: a storage density of up to 3 GB on a CD becomes economically feasible if the laser cost can be reduced sufficiently. However, the lowest cost configuration, in which an infrared diode laser is frequency doubled in a nonlinear waveguide, does not offer the capacity for blue light generation at high evoug ...

    SBIR Phase II 1995 Department of DefenseMissile Defense Agency
  10. Multichip Optical Coupling Technology for Opto-Electronic Packages

    SBC: Deacon Research            Topic: N/A

    The development of solid state blue lasers will open up new markets in areas from medical instrumentation to printing and inspection. However, the technology for coupling an infrared diode pump laser to a frequency doubling unit does not presently offer the capacity for blue generation at high enough power levels. We have devised a new method for increasing the efficiency of this coupling which sh ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government