List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. HIGH TEMPERATURE SUPERCONDUCTING PROGRAMMABLE VOLTAGE STANDARD

    SBC: CONDUCTUS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Commerce
  2. 3-D Printing of Opto-Electronic Components on Flexible Substrates

    SBC: Gemfire Corporation            Topic: N/A

    The technique of screen printing has been demonstrated to be of practical benefit in numerous engineering applications. Over the past two decades, these benefits have been widely recognized by the electronics industry, as evidenced by the flourishing fields of screen-printed thick-film electronics. Multilayer circuits are now manufactured by the sequential deposition of conductive and resistive pa ...

    SBIR Phase I 1998 Department of Commerce
  3. SILICON PHOTODIODE EUV TRANSFER STANDARDS WITH PLATINUM SILICIDE FRONT WINDOW

    SBC: International Radiation Detectors, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Commerce
  4. MICROMACHINING OF HIGH PERFORMANCE ULTRAVIOLET ARRAY DETECTORS

    SBC: LEEOAT COMPANY            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Commerce
  5. New Technology EDS Detectors for X-ray Microanalysis

    SBC: Photon Imaging, Inc.            Topic: N/A

    The goal of the proposed work is to develop a novel detector for analytical spectrometry having large active area, high-energy resolution and capable of operating at high counting rates. The proposed detector will be specifically designed for x-ray microanalysis to provide orders of magnitude advancement in the performance over conventional energy dispersive systems. During the Phase 1 effort of t ...

    SBIR Phase I 1998 Department of Commerce
  6. Horizontal ADCP for Remote Mapping of Currents

    SBC: RD INSTRUMENTS            Topic: N/A

    The objective is to develop a horizontal ADCP (HADCP) for mapping horizontal flow structure in channels, harbors, and ports. This would be useful in areas where currents pose a threat to safe boat navigation. The Challenge for such a system is to measure flow even though bottom and surface returns could contaminate the profiles. Phase 2 will develop a long range HADCP using a frequency of approxim ...

    SBIR Phase I 1998 Department of Commerce
  7. POLARIZED SCATTERIMETRY FOR SURFACE INSPECTION

    SBC: SpecTIR Corporation            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Commerce
  8. N/A

    SBC: CMS Engineering Systems, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Transportation
  9. Development of a Lightweigt Portable Track Loading Fixture

    SBC: EBERT COMPOSITES CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Transportation
  10. Low-Cost Safety Interlock for Frontal Air Bags

    SBC: Jaycor, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Transportation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government