Award Data

Alameda Applied Sciences Corporation (AASC) proposes to develop two components of a three-component, survivable debris shield for large area test exposures to cold (1-5keV) x-rays. These elements also have commercial potential in accelerators and in radiography. The elements are: an ultrafast gas curtain designed to be located close to the x-ray source to deflect plasma debris as well as ~um siz ...

Alameda Applied Sciences Corporation (AASC) proposes to develop a new type of trigger for a high voltage, high repetition rate diamond switch. AASC has previously developed diamond switches with electron beam triggers. These switches handle 10-20 kV voltage pulses with

Potential cost effective proprietary solutions to a number of outstanding problems involved in achieving an SBR capable of meeting military surveillance and reconnaissance requirement for the detection and track of both ground and airborne moving targets are proposed to be further developed and space-time adaptive processing SBR. Performance e ...

This Small Business Innovation Research Phase I project will develop refractive x-ray lenses for medical, industrial, scientific, and directed-energy applications. Previously, ordinary optical refractive lenses were assumed to not work at x-ray wavelengths because refractive effects were very small. Reflective and grazing angle techniques are usually limited to the soft x-ray region of the spectru ...

The objective of this proposal is to demonstrate the feasibility of vacuum micro-packaging for devices such as MEMS gyroscopes and accelerometers. Vacuum is critical for high Q-factor, surface-micromachined MEMS. Robust, low-cost solutions are needed for applications such as guided munitions and unattended sensors. Proposed work focuses on long-term reliability issues, such as outgassing, perme ...

We propose to engineer a low-cost computer-controlled optical diagnostic system for measuring sound speed, thermal diffusivity, density, and velocity. This system will use laser-induced thermal accoustics (LITA), a transient-grating technique capable of making accurate single-shot measurements in luminous, multiphase, high-pressure flows. The LITA signal intensity is quadratic in fluid density f ...

The complex HEV power systems necessitates flexible and dynamic simulation software providing tools for evaluating, characterizing and optimizing these systems. Existing software have neglected to characterize significant component data such as heat loads, cabin cooling requirements, battery thermal management, and heat rejection. Vehicle performance (accounting for environmental conditions and s ...

The Pulse Detonation Engine (PDE) is an intermittent combustion engine that relies on traveling detonation waves for the combustion and compression elements of the prosulsive cycle. This engine may be used as a low cost propulsion system in defense flight vehicle system applications or as the low speed cycle for a high Mach number combined cycle engine system. The mechanical simplicity of this e ...

The creation of digital design information for the manufacture of existing parts is a critical need for maintaining part inventories and to ensure the reliable operation of critical equipment. Such parts, which are frequently found in aging military aircraft, pose an important challenge to the Air Force's resupply operations. Current methods for obtaining the surface geometry of parts do not ad ...

Recent breakthroughs in virtual prototyping of flight vehicles Coupled with modern methods of Intelligent systems technology provide an opportunity to apply powerful new software tools to the design and testing of both flight vehicles and their associated training devices. Advanced Rotorcraft Technology, Inc. (ART) has developed FLIGHTLAB, a prototyping tool for flight dynamics modeling. ART is ...