List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Ultrafast Gas Curtain and Wire-Reinforced X-Ray Window Debris Shields

    SBC: Alameda Applied Sciences Corporation            Topic: N/A

    Alameda Applied Sciences Corporation (AASC) proposes to develop two components of a three-component, survivable debris shield for large area test exposures to cold (1-5keV) x-rays. These elements also have commercial potential in accelerators and in radiography. The elements are: an ultrafast gas curtain designed to be located close to the x-ray source to deflect plasma debris as well as ~um siz ...

    SBIR Phase I 1998 Department of DefenseNational Geospatial-Intelligence Agency
  2. Wafer-Wafer Transfer for Packaging and Assembly of MEMS

    SBC: Advanced Cmp Products, Inc.            Topic: N/A

    The objective of this proposal is to demonstrate the feasibility of vacuum micro-packaging for devices such as MEMS gyroscopes and accelerometers. Vacuum is critical for high Q-factor, surface-micromachined MEMS. Robust, low-cost solutions are needed for applications such as guided munitions and unattended sensors. Proposed work focuses on long-term reliability issues, such as outgassing, perme ...

    SBIR Phase I 1998 Department of DefenseDefense Advanced Research Projects Agency
  3. Sterilization and Decontamination of Surfaces Contaminated

    SBC: APPLIED PULSED POWER, INC.            Topic: N/A

    Decontamination of military personnel, equipment and facilities that have been exposed to deadly biological and / or chemical warfare agents is of critical concern to U.S. Armed Forces. Conventional technologies used for decontamination and sterilization suffer from drawbacks that include toxic effluents, radiation hazards to personnel, and very long time scales for the decontamination process pr ...

    STTR Phase I 1998 Department of DefenseDefense Advanced Research Projects Agency
  4. Adaptive Personal Assistant (APA)

    SBC: BCL Technologies            Topic: N/A

    BCL proposes developing an Adaptive Personal Assistant (APA) to assist professionals dramatically improve productivity of office automation tasks. The APA will take normal spoken English requests and perform tasks such as electronic mail, meeting coordination, and flight scheduling, and then adapt and optimize the output according to the user's preferences. In addition, the system will take the ...

    SBIR Phase I 1998 Department of DefenseDefense Advanced Research Projects Agency
  5. Efficient Digitization of Nuclear Fireball Film

    SBC: CARPENTER RESEARCH CORP.            Topic: N/A

    The objectives of the proposed work are to develop the technical feasibility and detailed requirements for new methods and technology to decrease, substantially, the cost and time required to digitize and store high-speed, high-resolution film without sacrificing the spatial and grayscale depth of the original film. The work will be aimed at improvements that would make it practical to digitize a ...

    SBIR Phase I 1998 Department of DefenseNational Geospatial-Intelligence Agency
  6. Lifting Vehicle for Forward Deployed Combat Units

    SBC: COMPUTER DEPARTMENT, LTD., THE            Topic: N/A

    The Computer Department Limited (CDL) proposes to develop a portable, rotary wing platform for use as a universal lifting body for small payloads. This system will use a novel lifting system to operate with a wide range of payloads under a wide spectrum of environmental conditions. The key elements of this system is a light weight collapsable structure, electric propulsion, rotary wing design fo ...

    SBIR Phase I 1998 Department of DefenseDefense Advanced Research Projects Agency
  7. Grafting of Thin Film and Microstructures for Microencapsulation and Polylithic Integration

    SBC: ELO TECHNOLOGIES, INC.            Topic: N/A

    The objective of this effort is to develop a generic process for mechanically grafting MEMS devices onto an arbitrary substrate. Such a process will enable the production of smart sensors and actuators without the device limitations imposed by combined MEMS/CMOS processing. Thinning of the MEMS substrate coupled with wafer-scale handling of discrete MEMS devices on an intermediate carrier substr ...

    SBIR Phase I 1998 Department of DefenseDefense Advanced Research Projects Agency
  8. Development of the Commander's Observation Vehicle for Elevated Reconnaissance (COVER)

    SBC: Perceptronics Solutions, Inc.            Topic: N/A

    Perceptronics and its team members Moller International and Flyer Group will design a complete elevated sensing system for forward-deployed combat units. The system, called COVER (Commander's Observation Vehicle for Elevated Reconnaissance), features an existing compact, electrically-tethered, ducted-fan lifting vehicle (Aerobot) mated to an existing highly-mobile, transportable vehicle (Flyer II ...

    SBIR Phase I 1998 Department of DefenseDefense Advanced Research Projects Agency
  9. Neurobiologically-based System for Object Segmentation and Recognition

    SBC: Intelligent Optical Systems, Inc.            Topic: N/A

    This phase I project will create, for the first time, a dynamic system, based on neurophysiology of the brain, to perfrom image segmentation using high level info. In computer vision, pattern recognition is frequently hampered by poor image segmentation. Segmentation algorithms have not been able to segment an image as a human would, instead they form regions based on mathematically defined crit ...

    SBIR Phase I 1998 Department of DefenseNational Geospatial-Intelligence Agency
  10. Hardness Validation by Verified Analysis (HV2A) Methodology for Advanced Materials

    SBC: KTECH CORP.            Topic: N/A

    Ktech proposes to develop a HV2A methodology for the assessment of nuclear weapon effects on new materials that are candidates for inclusion in strategic and tactical military systems. The methodology (1) provides an estimate of the system requirements and operation environments for each application specific material/structure, (2) establishes the critical response modes, (3) provides a framework ...

    SBIR Phase I 1998 Department of DefenseNational Geospatial-Intelligence Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government