List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. DEVELOPMENT OF A CONTINUOUS ISOCYANATES MONITOR

    SBC: ADA Technologies, Inc.            Topic: N/A

    THE OBJECTIVE OF THIS RESEARCH AND DEVELOPMENT PROGRAM IS TO DEMONSTRATE THE TECHNICAL FEASIBILITY OF DETECTING AND MONITORING ISOCYANATES IN WORKPLACE AIR AT OR BELOW THE THRESHOLD LIMIT VALUE (TLV) 0.02 PPM USING A REAL-TIME MONITORING TECHNIQUE. THE INSTRUMENT WILL DETECT AND ANALYZE FOR ISOCYANATES IN BOTH VAPOR AND AEROSOL FORM AND WILL SERVE AS A WORKPLACE MONITOR FOR ISOCYANATES TO REPLACE ...

    SBIR Phase I 1991 Department of Health and Human Services
  2. DEVELOPMENT OF A CONTINUOUS ISOCYANATES MONITOR

    SBC: ADA Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of Health and Human Services
  3. CASE-BASED TIMING ASSESSMENT TOOL

    SBC: ADVANCED SYSTEMS & TECHNOLOGIES INC            Topic: N/A

    N/A

    SBIR Phase I 1991 National Aeronautics and Space Administration
  4. SUPERCRITICAL CRYOGENIC SELF CONTAINED BREATHING APPARATUS

    SBC: Aerospace Design & Development, Inc.            Topic: N/A

    A SELF-CONTAINED BREATHING APPARATUS (SCBA) CAN BE DESIGNED WHICH CAN USE LIQUID AIR FOR FILLING, OPERATE AT AMBIENT CONDITIONS OR UNDER WATER, BE ATTITUDE INDEPENDENT, AND CAN BE STORED WITH NO ENRICHMENT IN OXYGEN. BY USE OF THE PROPER DESIGN CRITERIA IT WILL MEET OSHA AND NISOH REQUIREMENTS. THE TECHNOLOGY REQUIRED TO MAKE THIS SCBA IS FAMILIAR TO THESPACE PROGRAM. THIS IS THE USE OF A SUPERCRI ...

    SBIR Phase II 1991 National Aeronautics and Space Administration
  5. A HIGH RELIABILITY OXYGEN/JTX CRYOGENIC REFRIGERATOR

    SBC: Aerospace Design & Development, Inc.            Topic: N/A

    USING TECHNOLOGY NOW IN EXISTENCE AND NOW BEING DEVELOPED IT IS POSSIBLE TO BUILD A HIGH RELIABILITY, CRYOGENIC OXYGEN REFRIGERATOR. THE TEMPERATURE RANGE IN WHICH THE REFRIGERATOR WOULD FUNCTION WOULD BE CONTROLLABLE BETWEEN 70 AND 140 KELVIN. THE BASIS FOR THIS REFRIGERATION CYCLE WOULD BE CERAMIC ELECTROLYTE TECHNOLOGY BY WHICH OXYGEN CAN BE COMPRESSED USING AN ELECTRIC POTENTIAL ACROSS THE CER ...

    SBIR Phase I 1991 Department of DefenseMissile Defense Agency
  6. UGT INSTRUMENTATION FOR ELECTRICAL PARAMETER MEASUREMENT

    SBC: APTEK, Inc.            Topic: N/A

    THIS PROGRAM WILL DEVELOP FIELD INSTRUMENTATION SUITABLE FOR USE IN AN UNDERGROUND (UGT) OR ABOVEGROUND (AGT) RADIATION TEST ENVIRONMENT, FOR THE MEASUREMENT OF ELECTRICAL PROPERTIES OF MATERIALS AS THEY RECOVER FROM IRRADIATION. THE EFFORT WILL CONSIST OF SAMPLE HOLDER AND INSTRUMENTATION DESIGN, RESPONSE ANALYSIS, AND THE FABRICATION OF A LABORATORY TEST SETUP TO SHOW TECHNIQUE FEASIBILITY.

    SBIR Phase II 1991 Department of DefenseDefense Threat Reduction Agency
  7. SENSITIVE LOW Z STRAIN GAGE

    SBC: APTEK, Inc.            Topic: N/A

    THIS ACTIVITY WILL INVESTIGATE THE USE OF PVDF FILM FOR USE AS A LOW Z STRAIN GAGE. THE PVDF MATERIAL IS AN ORDER OF MAGNITUDE MORE SENSITIVE THAN PZT AS A PIEZOELECTRIC MATERIAL AND HAS AN ATOMIC NUMBER MUCH LOWER (LOW Z) THAN PRESENT RESISTIVE STRAIN GAGE MATERIALS. THEREFORE, PVDF AS A STRAIN GAGE WILL BE CAPABLE OF MEASURING MUCH LOWER LEVELS OF STRAIN THAN PRESENT GAGING TECHNIQUES, AND WILL ...

    SBIR Phase II 1991 Department of DefenseDefense Threat Reduction Agency
  8. CONCRETE SPALL PROTECTION DEVELOPMENT

    SBC: APTEK, Inc.            Topic: N/A

    HIGH PRESSURE BLAST OR IMPACT LOADS ON THE OUTSIDE OF A CONCRETE WALL CAN CAUSE SPALLING OF THE INSIDE OF THE WALL. FLYING SPALL FRAGMENTS ARE DANGEROUS TO PERSONAL AND EQUIPMENT INSIDE CONCRETE BUILDINGS SUBJECTED TO ATTACK OR ACCIDENTIAL EXPLOSION. THIS PROPOSAL DETAILS THE LOGICAL, STEP-BY-STEP DEVELOPMENT OF A SPALL PROTECTION SYSTEM THAT CAN BE APPLIED TO NEW AND EXISTING CONCRETE WALLS. THE ...

    SBIR Phase II 1991 Department of DefenseAir Force
  9. AN OPTIMAL MISSILE SHAPE DESIGN PACKAGE

    SBC: APTEK, Inc.            Topic: N/A

    THE OVERALL GOAL OF PHASE I AND PHASE II IS TO DEVELOP SOFTWARE THAT WILL FIND THE OPTIMAL SIZE AND SHAPE OF MISSILE DESIGNS ACCORDING TO USER DEFINED DESIGN CRITERIA. PHASE I WILL SHOW THE FEASIBILITY OF MISSILE SHAPE DESIGN OPTIMIZATION BY COMBINING A GEOMETRIC MODELER, OPTIMIZATION SOFTWARE, AND FREE-FORM DEFORMATION WITH AN ANALYSIS MODULE. THE PHASE I ANALYSIS MODULE WILL CONTAIN AERODYNAMICS ...

    SBIR Phase II 1991 Department of DefenseAir Force
  10. AUTOMATION OF STOWAGE- PHASE I

    SBC: APTEK, Inc.            Topic: N/A

    THE INNOVATION PROPOSED HEREIN WILL DETERMINE OPTIMAL PACKING SOLUTIONS FOR LOCATION AND ORIENTATION OF ITEMS TO BE STOWED IN THE SPACE STATION. THE TECHNIQUE WILL USE THREE-DIMENSIONAL COMPUTER GRAPHICS COUPLED WITH ENGINEERINGDESIGN OPTIMIZATION METHODOLOGIES TO EFFICIENTLY DETERMINE PREFERRED STOWAGE SOLUTIONS. CONSTRAINTS SUCH AS MINIMUM DISTANCE BETWEEN OBJECTS, MASS PROPERTIES, FIXED OBJECT ...

    SBIR Phase II 1991 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government