List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. SBIR Phase II: Microdisplays Based on III-Nitride Wide Band Gap Semiconductors

    SBC: III-N Technology, Inc            Topic: N/A

    The goal of this SBIR Phase II project is to bring the demonstrated Gallium Nitride (GaN) microdisplay technology to industrial maturity and to final commercialization levels. The project's goal will be accomplished by further optimizing the microdisplay device structural design and fabrication process based on the demonstrative results obtained in Phase I. Based on high-efficiency semiconductor m ...

    SBIR Phase II 2005 National Science Foundation
  2. STTR Phase I: Particle Sorting via Aerodynamic Vectoring

    SBC: CASTLEROCK ENGINEERING            Topic: MI

    This Small Business Technology Transfer (STTR) Phase I project presents a new, non-contact method for sorting particles by size. The primary objective of Phase I activities is to evaluate the technical and commercial feasibility of a particle sorter based upon Aerodynamic Vectoring. This objective will be accomplished in an air jet facility through high-speed imaging and optical particle tracking, ...

    STTR Phase I 2005 National Science Foundation
  3. SBIR Phase I: Direct Energy Conversion Technology to Convert Smelter Waste Heat to Electricity

    SBC: ENECO            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will direct thermal-energy-to-electrical-energy conversion technology (DTEC) to produce Thermal Diodes to capture waste heat from electrolytic smelters and to convert it into additional electricity for use by the smelter, thereby improving energy efficiency. The research objective is to develop the most fundamental elements of ENECO's ...

    SBIR Phase I 2005 National Science Foundation
  4. SBIR Phase II: Field Demonstration of a Novel Biotechnology for In-Situ Bioremediation of Methyl Tert-Butyl Ether (MTBE) in Groundwater

    SBC: MICROVI BIOTECH, INC.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project aims to develop a novel process for in-situ bioremediation of methyl tert-butyl ether (MTBE) in groundwater. The Environmental Protection Agency (EPA) considers MTBE a potential human carcinogen. Currently, MTBE's Maximum Contaminant Level (MCL) in drinking water has been set for 18 parts per billion. It is estimated that the cost of ...

    SBIR Phase II 2005 National Science Foundation
  5. SBIR Phase II: Advanced Controlled-Impedance Transfemoral Knee/Ankle Prosthesis

    SBC: MOTION CONTROL, INC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project aims to develop a transfemoral prosthesis which will allow wearers to walk and run more smoothly, with greater stability and less effort. Typically, transfemoral amputees have difficulty achieving a natural gait, thus causing discomfort and greater energy expenditure. It is expected that the development of this advanced prosthesis wil ...

    SBIR Phase II 2005 National Science Foundation
  6. STTR Phase I: Shaping and Slicing of Germanium Boules Through Wire-Electron Discharge Machining (EDM) for Reduced Subsurface Damage and Increased Productivity

    SBC: OPTIMATION            Topic: MI

    This Small Business Technology Transfer (STTR) Phase I project will deliver an experimental setup capable of studying the machining of germanium boules with a wire-EDM process in great detail. The research collaboration with the University of Utah will allow the use of wire-EDM for machining of germanium to be explored at a very fundamental level. The outcome of this collaboration will be the iden ...

    STTR Phase I 2005 National Science Foundation
  7. SBIR Phase I: Multi-Environment Probability Density Function (PDF) Method for Modeling Turbulent Combustion Using Detailed Chemistry

    SBC: Reaction Engineering International            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will investigate the applicability and merit of applying the multi-environment probability density function (MEPDF) method to model turbulent combustion problems with realistic chemical kinetics within comprehensive CFD simulations of practical combustion equipment. MEPDF retains many of the desirable properties of the transported pro ...

    SBIR Phase I 2005 National Science Foundation
  8. SBIR Phase II: A Foundation for Emergency Egress Simulation

    SBC: Thunderhead Engineering Consultants, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop new capability to model emergency egress from buildings. The primary focus of the research is evacuation due to fires, but the software will be designed such that exposure and response to biological and chemical agents can also be simulated. The project will couple egress analysis to time-varying fire conditions (e.g. smo ...

    SBIR Phase II 2005 National Science Foundation
  9. SBIR Phase I: T-Splines for Surface Intersection

    SBC: T-Spline Company            Topic: IT

    This Small Business Innovative Research Phase I research project will investigate the application of T-splines to the problem of computing a topologically consistent surface intersection for geometric modeling applications. In the CAD/CAM industry, most free-form geometric modeling is done using NURBS surfaces. The intersection between two NURBS surfaces is traditionally represented using trimmed- ...

    SBIR Phase I 2005 National Science Foundation
  10. SBIR Phase I: A Quality Monitor for Enabling Water Recycling in Semiconductor Processing- The Particle Scout

    SBC: Uncopiers, Inc.            Topic: MI

    This Small Business Innovation Research (SBIR) Phase I project concerns Ultrapure Water (UPW), the lifeblood of the semiconductor industry. The proposed instrument seeks to satisfy the International Technology Roadmap for Semiconductors (ITRS) requirements on two counts: 1. full flow inspections, 2. detection of sub-100nm liquid-borne particles. A typical semiconductor fab uses about 3 million gal ...

    SBIR Phase I 2005 National Science Foundation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government