You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. SBIR Phase II: High-resolution, high-precision 193-nm photomask phase metrology system

    SBC: LUMERAS LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project aims to design and construct an ultra-high-resolution, high-precision phase-shift integrated measurement system suitable for metrology of advanced phase-shifting photomasks. A number of semiconductor manufacturers now expect to progress from the 90 nm through the 45 nm nodes using an exposure wavelength of 193 nm. Advanced photolitho ...

    SBIR Phase II 2005 National Science Foundation
  2. SBIR Phase II: Grid Computing for Energy Exploration and Development

    SBC: 3dgeo Development Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a grid-enabled environment where large multidimensional seismic data sets can be rapidly accessed, visualized, and interpreted by geographically dispersed users with heterogeneous local resources. The proposed work will transform the Phase I prototype into production-ready commercial quality software, and demonstrate it o ...

    SBIR Phase II 2005 National Science Foundation
  3. SBIR Phase II: Variable Azimuth Wave-Equation Imaging (VAWEM)

    SBC: 3dgeo Development Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will implement and demonstrate the feasibility of a new technology that enables enhance seismic resolution and imaging of deep water complex geologic structures by using variable azimuth wave-equation migration (VAWEM). VAWEM will provide much greater resolution and accuracy than what can be accomplished today for towed marine stre ...

    SBIR Phase II 2005 National Science Foundation
  4. SBIR Phase II: X-ray Microscope for In-Vivo Biological Imaging

    SBC: ADELPHI TECHNOLOGY INC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project aims to develop a sub-micron x-ray tomography scanner capable of providing in-vivo and high resolution images of specimens from mice to bacteria. In this era of molecular medicine, where disease and developmental disorders are being re-defined by their peculiar molecular, genetic or cellular profiles, there exists a signif ...

    SBIR Phase II 2005 National Science Foundation
  5. SBIR Phase II: Microdisplays Based on III-Nitride Wide Band Gap Semiconductors

    SBC: III-N Technology, Inc            Topic: N/A

    The goal of this SBIR Phase II project is to bring the demonstrated Gallium Nitride (GaN) microdisplay technology to industrial maturity and to final commercialization levels. The project's goal will be accomplished by further optimizing the microdisplay device structural design and fabrication process based on the demonstrative results obtained in Phase I. Based on high-efficiency semiconductor m ...

    SBIR Phase II 2005 National Science Foundation
  6. SBIR Phase II: Rapid Detection of Bacterial Contaminants Using Micro-Fluidic Biochips

    SBC: Biovitesse, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a microfluidic based system for the detection of viable pathogens using dielectric concentration of bacteria as an intermediate step. This system would use a first-stage concentrator, followed by dielectrophoretic concentration, and finally by culturing in media with integrated impedance measurements to detect culture gro ...

    SBIR Phase II 2005 National Science Foundation
  7. SBIR Phase I: Micro-Coax Manufacturability Study

    SBC: BridgeWave            Topic: MI

    This Small Business Innovation Research (SBIR)Phase I research project is aimed at advancing the capability to create high bandwidth interconnects for increasingly higher frequency digital and analog electronics systems. The technology is applicable to printed circuit board, as well as device-level interconnects. The proposed innovation applies conformal coating of polymeric and lithographically d ...

    SBIR Phase I 2005 National Science Foundation
  8. SBIR Phase II: Quantitative Detection of Bacterial Pathogens in Seeds by Use of a Novel Enrichment Technique Coupled with Automated Real-Time PCR

    SBC: CalSPL            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project aims to develop a highly sensitive PCR-based diagnostic kit for the detection of pathogens in crop seeds. Seed health testing is important in order to identify infected lots that should be excluded from seed sales. Because only a few seeds in a seed lot are usually infected, highly sensitive test methods are needed. The standard met ...

    SBIR Phase II 2005 National Science Foundation
  9. STTR Phase I: Particle Sorting via Aerodynamic Vectoring

    SBC: CASTLEROCK ENGINEERING            Topic: MI

    This Small Business Technology Transfer (STTR) Phase I project presents a new, non-contact method for sorting particles by size. The primary objective of Phase I activities is to evaluate the technical and commercial feasibility of a particle sorter based upon Aerodynamic Vectoring. This objective will be accomplished in an air jet facility through high-speed imaging and optical particle tracking, ...

    STTR Phase I 2005 National Science Foundation
  10. SBIR Phase I: Silicon Insert Molded Plastics: Mold & Process Development

    SBC: CEP            Topic: N/A

    This Small Business Innovation Research Phase I project aims to develop a process for injection molding polymer parts with tolerances, smoothness, and dimensions at a nanoscale level. This process, called Silicon Insert Molded Plastics (SIMP) (funded by a NSF grant), employs silicon inserts manufactured using microfabrication techniques as the feature generating surfaces of a mold tool. Current mo ...

    SBIR Phase I 2005 National Science Foundation
US Flag An Official Website of the United States Government