You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. SBIR Phase II: Hydrothermal Growth of Ultra-High Performance Nd:YVO4 Laser Crystals

    SBC: ADVANCED PHOTONIC CRYSTALS, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will focus on the development of a commercial process for the growth of Neodymium Yttrium Vanadate (Nd: YVO4) single crystals for use in solid-state lasers. This research will generate the commercially viable conditions for growth of large boules of single crystals suitable for use in diode pumped solid-state lasers. The hydrothermal ...

    SBIR Phase I 2003 National Science Foundation
  2. SBIR Phase I: Homogeneous, High-Efficiency TiO2 and YVO4 Birefringent Crystals

    SBC: ADVANCED PHOTONIC CRYSTALS, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR)Phase I project will prove that homogeneous, low-loss TiO2 and YVO4 crystals can be produced via commercially viable hydro-thermal crystal growth processes. Recently, a program to grow homogeneous YVO4 and TiO2 birefringent crystals using hydro-thermal growth methods had preliminary results that indicate that these crystals can be grown in hydro-therma ...

    SBIR Phase I 2003 National Science Foundation
  3. SBIR Phase I: Ge-Free Strained Silicon Via dTCE Bonding (Differential Thermal Coefficient of Expansion Bonding)

    SBC: Belford Research, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I propose to combine the technologies of silicon-on-insulator (SOI) manufacture with strain-inducing wafer bonding to produce Strained-Si On Insulator (SSOI) wafers. Silicon-based devices with silicon/germanium (Si/Ge) heterostructures have been extensively researched and this has lead to the discovery that tensile strained silicon exhibits s ...

    SBIR Phase I 2003 National Science Foundation
  4. SBIR Phase II: Direct Measurement of Wafer Temperature in White/UV LED Manufacture

    SBC: Bellwether Instr., LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) project will develop a highly accurate temperature measurement system that can be used in optimizing the growth of high brightness light emitting diodes for solid state lighting applications. This product does not currently exist due to technical difficulties in measuring the substrate or gallium nitride (GaN) epilayer in a region where they ab ...

    SBIR Phase I 2003 National Science Foundation
  5. SBIR Phase II: Field Demonstration of a Novel Biotechnology for In-Situ Bioremediation of Methyl Tert-Butyl Ether (MTBE) in Groundwater

    SBC: MICROVI BIOTECH, INC.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project aims to develop a novel process for in-situ bioremediation of methyl tert-butyl ether (MTBE) in groundwater. The Environmental Protection Agency (EPA) considers MTBE a potential human carcinogen. Currently, MTBE's Maximum Contaminant Level (MCL) in drinking water has been set for 18 parts per billion. It is estimated that the cost of ...

    SBIR Phase I 2003 National Science Foundation
  6. SBIR Phase I: Studies on Preparation and Reactivity of Surface Derivatized NanoActive Metal Oxides

    SBC: NanoScale Materials, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will develop new surface derivatized reactive nanoparticles. These nanoparticles are expected to be highly active adsorbents and should be important in a number of applications. In the project, attention will be focused on preparing nanoparticles containing Lewis acid or base centers. The chemical modification involves introducing Lew ...

    SBIR Phase I 2003 National Science Foundation
  7. SBIR Phase I: New Synthetic Strategies for Fluoropolymer Integrated Optics

    SBC: TETRAMER TECHNOLOGIES LLC            Topic: N/A

    This Small Business Innovation Research Phase I project will focus on synthesis methods to bring the cost of perflurocyclobutyl (PFCB) containing polymers to commercially practical levels. PFCBs are exciting photonic materials due to their breakthrough optical performance and manufacturing characteristics of low optical transmission loss, high Tg, broad refractive index tailorability, and excel ...

    SBIR Phase I 2003 National Science Foundation
  8. SBIR Phase I: Next Generation Plastic Actuators and Transducers

    SBC: TETRAMER TECHNOLOGIES LLC            Topic: N/A

    This Small Business Innovation Research Phase I project will develop an optimized manufacturing process for new robust, high efficiency, polymer piezo actuators and transducers based on polyvinylidene di-fluoride (PVDF) - carbon nanotube nanocomposites. These new actuators and transducers have recently been demonstrated in the laboratory and have shown a remarkable 300-500 % performance improvemen ...

    SBIR Phase I 2003 National Science Foundation
  9. SBIR Phase I: Integrated Fire Modeling Software

    SBC: Thunderhead Engineering Consultants, Inc.            Topic: N/A

    This SBIR project will develop an integrated fire modeling software package for use in building design and accident analysis. Modeling fires using a rigorous, scientific approach makes it possible to predict the course of an evolving fire and its impact on the building occupants, contents, and structure. The software will help designers implement new fire safety codes and standards that allow the ...

    SBIR Phase I 2003 National Science Foundation
  10. SBIR Phase I: ACIM deBonder: Thin Film Integrity Testing using controlled microcavitation

    SBC: Uncopiers, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will develop a new method of measuring how strongly a thin film anchors to its substrate. To date no method exists that can truly measure thin film adhesion. The Acoustic Coaxing Induced Microcaviation (ACIM) deBonder uses controlled microcavitation to directly reveal a thin film's adhesion strength by subjecting it to controlled erosi ...

    SBIR Phase I 2003 National Science Foundation
US Flag An Official Website of the United States Government