List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Flow Control and Operation Monitoring System for Individual Spray Nozzles

    SBC: Capstan Ag Systems, Inc.            Topic: N/A

    NON-TECHNICAL SUMMARY: Agricultural spray equipment operators typically cannot monitor all nozzles along the boom. Clogged or malfunctioning nozzles produce undesirable spraying results. This project is designed to lead directly to a useful product, namely, a single-nozzle monitoring unit for agricultural spray applications. The monitoring capabilities of the system will allow more efficient, reli ...

    SBIR Phase II 2003 Department of Agriculture
  2. Flow Control and Operation Monitoring System for Individual Spray Nozzles

    SBC: Capstan Ag Systems, Inc.            Topic: N/A

    NON-TECHNICAL SUMMARY: Agricultural spray equipment operators typically cannot monitor all nozzles along the boom. Clogged or malfunctioning nozzles produce undesirable spraying results. This project is designed to lead directly to a useful product, namely, a single-nozzle monitoring unit for agricultural spray applications. The monitoring capabilities of the system will allow more efficient, reli ...

    SBIR Phase I 2003 Department of Agriculture
  3. An Ultralight Autonomous Robot for Weed Control

    SBC: PARALLEL SOLUTIONS, INC.            Topic: N/A

    NON-TECHNICAL SUMMARY: The effective control of weeds is one of the most important and costly issues in commercial agriculture. Practically all weed control is accomplished by mechanical means (cultivation) or broadcast spraying of herbicides. Global positioning systems, remote sensing and variable-rate technology have been used for site-specific herbicide application. The anticipated results will ...

    SBIR Phase I 2003 Department of Agriculture
  4. A Soil Sampling System for On-the-Go Analysis and Mapping of pH and Other Properties

    SBC: Kejr, Inc.            Topic: N/A

    NON-TECHNICAL SUMMARY: As crop growers begin to use GPS technology to manage the variability in their fields, they are seeking ways to assess the variability of physical and chemical properties more accurately and cost-effectively. In the most common approach, soil samples are acquired on a 2.5 acre grid pattern. Soil properties often have greater spatial variability than is identified with this a ...

    SBIR Phase II 2003 Department of Agriculture
  5. A Soil Sampling System for On-the-Go Analysis and Mapping of pH and Other Properties

    SBC: Kejr, Inc.            Topic: N/A

    NON-TECHNICAL SUMMARY: As crop growers begin to use GPS technology to manage the variability in their fields, they are seeking ways to assess the variability of physical and chemical properties more accurately and cost-effectively. In the most common approach, soil samples are acquired on a 2.5 acre grid pattern. Soil properties often have greater spatial variability than is identified with this a ...

    SBIR Phase I 2003 Department of Agriculture
  6. Transport of Methane Pellets for Advanced Cold Moderators

    SBC: Cryogenic Applications F, Inc.            Topic: N/A

    73071S03-I Existing and planned neutron facilities, such as the Spallation Neutron Source, generate pulses of cold neutrons for materials research. The efficiency of the beam line components, which convert the fast neutrons to a cold neutron beam, determines the usefulness of the facility. Existing solid methane moderators have a high efficiency, but they can¿t be scaled to work on planned hig ...

    SBIR Phase I 2003 Department of Energy
  7. Development of a Catalytically Active Solvent for Desulfurization of Transportation Fuel

    SBC: Extractica, Llc            Topic: N/A

    72102S03-I In order to comply with current EPA regulations for reducing the level of sulfur in gasoline and diesel fuel, domestic refineries will need to install new process units for desulfurization of the fuel streams. However, current commercially available desulfurization technologies have significant energy requirements due to the severe operating conditions (such as high temperatures and p ...

    SBIR Phase I 2003 Department of Energy
  8. Waveshifters and Scintillators for Ionizing Radiation Detection

    SBC: First American Scientific Corporati            Topic: N/A

    70702B02-II Organic scintillators and waveshifters are fundamental materials used in the detection of ionizing radiation in experimental detectors for high energy physics research, and in other applications such as nuclear medicine and homeland security. Future scientific developments will require improving scintillator and waveshifter response time while maintaining high light efficiency, good ...

    STTR Phase I 2003 Department of Energy
  9. Hydroforming of Lightweight Aluminum and Magnesium Components from Tube-Development and Commercialization of a Novel Elevated Temperature Hydroforming System

    SBC: K. Wetzel & Company            Topic: N/A

    70075T02-II Significant fuel cost savings can be realized in the automotive and aerospace industries by employing lightweight materials in the design and fabrication of vehicular components. To date, the exploitation of lightweight magnesium and aluminum alloys in component fabrication has been restricted due to their limited formability at room temperatures in conventional metal stamping proc ...

    STTR Phase II 2003 Department of Energy
  10. Hydroforming of Lightweight Aluminum and Magnesium Components from Tube-Development and Commercialization of a Novel Elevated Temperature Hydroforming System

    SBC: K. Wetzel & Company            Topic: N/A

    70075T02-II Significant fuel cost savings can be realized in the automotive and aerospace industries by employing lightweight materials in the design and fabrication of vehicular components. To date, the exploitation of lightweight magnesium and aluminum alloys in component fabrication has been restricted due to their limited formability at room temperatures in conventional metal stamping proc ...

    STTR Phase I 2003 Department of Energy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government