List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Practical Force-Feedback System for Upper Limb Prosthesis Users

    SBC: MOTION CONTROL, INC            Topic: N/A

    N/A

    SBIR Phase I 2003 Department of Education
  2. Practical Force-Feedback System for Upper Limb Prosthesis Users

    SBC: MOTION CONTROL, INC            Topic: N/A

    N/A

    SBIR Phase II 2003 Department of Education
  3. SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

    SBIR Phase II 2003 National Science Foundation
  4. SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

    SBIR Phase I 2003 National Science Foundation
  5. SBIR Phase I: New Heat Flow Sensor Development for High Throughput Microcalorimeters

    SBC: Energetic Genomics Corporation            Topic: N/A

    This Small Business Innovation Research Phase I project will yield a new heat flow or differential temperature sensing technology that will fundamentally improve micro-calorimeters and other instruments that depend on temperature measurement or control. The activity will complete the detailed design and fabrication of a new type of heat flow sensor having 10 to 100 times greater sensitivity than ...

    SBIR Phase I 2003 National Science Foundation
  6. SBIR Phase I: Bio-based Design of Structural Ceramics

    SBC: Javelin3D, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will identify materials with desirable properties and performance standards. Rapid advances in communication technology, flight-based transportation, medical components and military strategy due to rapidly changing global alliances is pushing a need for materials that goes beyond current capabilities. This project will use advanced ...

    SBIR Phase I 2003 National Science Foundation
  7. SBIR Phase II: Field Demonstration of a Novel Biotechnology for In-Situ Bioremediation of Methyl Tert-Butyl Ether (MTBE) in Groundwater

    SBC: MICROVI BIOTECH, INC.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project aims to develop a novel process for in-situ bioremediation of methyl tert-butyl ether (MTBE) in groundwater. The Environmental Protection Agency (EPA) considers MTBE a potential human carcinogen. Currently, MTBE's Maximum Contaminant Level (MCL) in drinking water has been set for 18 parts per billion. It is estimated that the cost of ...

    SBIR Phase I 2003 National Science Foundation
  8. SBIR Phase II: Advanced Controlled-Impedance Transfemoral Knee/Ankle Prosthesis

    SBC: MOTION CONTROL, INC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project aims to develop a transfemoral prosthesis which will allow wearers to walk and run more smoothly, with greater stability and less effort. Typically, transfemoral amputees have difficulty achieving a natural gait, thus causing discomfort and greater energy expenditure. It is expected that the development of this advanced prosthesis wil ...

    SBIR Phase I 2003 National Science Foundation
  9. SBIR Phase I: Studies on Preparation and Reactivity of Surface Derivatized NanoActive Metal Oxides

    SBC: NanoScale Materials, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will develop new surface derivatized reactive nanoparticles. These nanoparticles are expected to be highly active adsorbents and should be important in a number of applications. In the project, attention will be focused on preparing nanoparticles containing Lewis acid or base centers. The chemical modification involves introducing Lew ...

    SBIR Phase I 2003 National Science Foundation
  10. SBIR Phase I: Integrated Fire Modeling Software

    SBC: Thunderhead Engineering Consultants, Inc.            Topic: N/A

    This SBIR project will develop an integrated fire modeling software package for use in building design and accident analysis. Modeling fires using a rigorous, scientific approach makes it possible to predict the course of an evolving fire and its impact on the building occupants, contents, and structure. The software will help designers implement new fire safety codes and standards that allow the ...

    SBIR Phase I 2003 National Science Foundation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government