List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Practical Force-Feedback System for Upper Limb Prosthesis Users

    SBC: MOTION CONTROL, INC            Topic: N/A

    N/A

    SBIR Phase I 2003 Department of Education
  2. Practical Force-Feedback System for Upper Limb Prosthesis Users

    SBC: MOTION CONTROL, INC            Topic: N/A

    N/A

    SBIR Phase II 2003 Department of Education
  3. SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

    SBIR Phase II 2003 National Science Foundation
  4. SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

    SBIR Phase I 2003 National Science Foundation
  5. SBIR Phase I: Hybrid Fabrication of Very High Efficiency Gratings

    SBC: Diffraction, Ltd            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project proposes to address the need for large highly efficient gratings as essential components of astronomical, spectroscopic, and optical telecommunications equipment. The goal of the proposed research program is to develop a hybrid manufacturing process combining holography and preferential chemical etching to produce large area diffractio ...

    SBIR Phase I 2003 National Science Foundation
  6. SBIR Phase I: New Heat Flow Sensor Development for High Throughput Microcalorimeters

    SBC: Energetic Genomics Corporation            Topic: N/A

    This Small Business Innovation Research Phase I project will yield a new heat flow or differential temperature sensing technology that will fundamentally improve micro-calorimeters and other instruments that depend on temperature measurement or control. The activity will complete the detailed design and fabrication of a new type of heat flow sensor having 10 to 100 times greater sensitivity than ...

    SBIR Phase I 2003 National Science Foundation
  7. SBIR Phase II: Low-Cost, High-Efficiency Power Amplifiers for Magnetic-Resonance Imaging

    SBC: Green Mountain Radio Research Company            Topic: N/A

    This Small Business Innovation Research Phase II will develop and test a prototype low-cost, high-efficiency transmitter for magnetic-resonance-imaging (MRI) systems. Existing MRI transmitters use conventional power amplifiers (PAs), which makes them inefficient and consequently large, heavy, and expensive. Phase I has demonstrated the feasibility of using developed high-efficiency amplification t ...

    SBIR Phase I 2003 National Science Foundation
  8. SBIR Phase II: Low-Cost, High-Efficiency Power Amplifiers for Magnetic-Resonance Imaging

    SBC: Green Mountain Radio Research Company            Topic: N/A

    This Small Business Innovation Research Phase II will develop and test a prototype low-cost, high-efficiency transmitter for magnetic-resonance-imaging (MRI) systems. Existing MRI transmitters use conventional power amplifiers (PAs), which makes them inefficient and consequently large, heavy, and expensive. Phase I has demonstrated the feasibility of using developed high-efficiency amplification t ...

    SBIR Phase II 2003 National Science Foundation
  9. SBIR Phase I: Bio-based Design of Structural Ceramics

    SBC: Javelin3D, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will identify materials with desirable properties and performance standards. Rapid advances in communication technology, flight-based transportation, medical components and military strategy due to rapidly changing global alliances is pushing a need for materials that goes beyond current capabilities. This project will use advanced ...

    SBIR Phase I 2003 National Science Foundation
  10. SBIR Phase II: Field Demonstration of a Novel Biotechnology for In-Situ Bioremediation of Methyl Tert-Butyl Ether (MTBE) in Groundwater

    SBC: MICROVI BIOTECH, INC.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project aims to develop a novel process for in-situ bioremediation of methyl tert-butyl ether (MTBE) in groundwater. The Environmental Protection Agency (EPA) considers MTBE a potential human carcinogen. Currently, MTBE's Maximum Contaminant Level (MCL) in drinking water has been set for 18 parts per billion. It is estimated that the cost of ...

    SBIR Phase I 2003 National Science Foundation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government