You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

    SBIR Phase II 2003 National Science Foundation
  2. SBIR Phase II: Continuous Flow Reactor and Size-Selection Chromagraphic Scheme for Use in High Throughput Manufacture of Silicon Nanoparticles

    SBC: InnovaLight, Inc            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project is to continue the scale up of luminescent Si nanocrystal production using the continuous flow reactor developed during the Phase I period where the main objective of the Phase I proposal of converting a cumbersome batch process into an efficient continuous one was accomplished. This new continuous flow reactor will serve as an enabli ...

    SBIR Phase II 2003 National Science Foundation
  3. SBIR Phase II: Surface Modification of Textiles for Protective Clothing

    SBC: LYNNTECH INC.            Topic: N/A

    This Small Business Innovation Research Phase II project involves the modification of the surface of textiles through graft polymerization of an oxidizing polymer resulting in a fabric which has the ability to eradicate/neutralize pathogenic microorganisms, pesticides, and chemical/biological weapons. The fabric could be used to produce medical textiles in order to reduce the transmission of infec ...

    SBIR Phase II 2003 National Science Foundation
  4. SBIR Phase II: Electrochemical Disinfectant Generator for Multiple In-Situ Applications

    SBC: LYNNTECH INC.            Topic: N/A

    This Small Business Research (SBIR) Phase II project is concerned with the development and commercialization of electrochemically operated devices that will revolutionize the disinfectant industry by providing on-site, on-demand generation of extremely potent dual disinfectants. Peroxyacids are well known disinfectants that remove even resistant microorganisms (i.e. spores) by attacking S-S and S- ...

    SBIR Phase II 2003 National Science Foundation
  5. SBIR Phase II: Analytic Simulation Method for Oil/Gas Field Management and Optimization

    SBC: Potential Research Solutions            Topic: N/A

    This Small Business Innovation Research (SBIR)Phase II project provides the foundational R&D for new oil and gas reservoir management tools to optimize hydrocarbon recovery. It proposes extension of state-of-the-art analytic solution methods for potential flow in porous media from 2-D to 3-D. It incorporates 3-D analytic fluid flow simulation technology into large-scale optimization routines where ...

    SBIR Phase II 2003 National Science Foundation
  6. SBIR Phase II: An Innovative Normal Stress Sensor System for Complete Characterization of Polymer Shear Flow Properties

    SBC: RheoSense            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will address several technical improvements needed for successful commercialization of a novel MEMS sensor plate containing monolithic miniature capacitive pressure sensors. As shown in Phase I, the sensor plate can be used to accurately measure the first (N1) and second (N2) normal stress differences, which are important nonlinear e ...

    SBIR Phase II 2003 National Science Foundation
  7. SBIR Phase II: Residual Stress and Part Distortion Prediction in Machined Workpiece Surfaces

    SBC: Third Wave Systems, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop and validate the predictive capability industry needs to dramatically improve machined workpiece quality by controlling machining induced stresses while simultaneously reducing distortion in aerospace and automotive parts. The objective for Phase II will be to continue the development and verification of analysis tools fo ...

    SBIR Phase II 2003 National Science Foundation
  8. PIEZOPUMPS FOR MICROCHEMICAL STIMULATION OF TISSUE

    SBC: MicroFab Technologies Inc            Topic: N/A

    INJECTING BIOLOGICALLY ACTIVE SOLUTIONS INTO CELLS AND TISSUES IS AN INTEGRAL PART OF MOST BIOMEDICAL RESEARCH, BUT THE INSTRUMENTATION AVAILABLE FOR THESE PROCEDURES IS CRUDE, CUMBERSOME, AND IMPRECISE. MICROFAB TECHNOLOGIES, INC., HAS DEVELOPED A SOLID-STATE PIEZOELECTRIC 'PUMP' THAT COULD REPLACE MECHANICAL PUMPS, IONTOPHORESIS, AND PRESSURE-INJECTION SYSTEMS IN MANY BIOMEDICAL RESEARCH APPLICA ...

    SBIR Phase II 1990 National Science Foundation
  9. ARTIFICIALLY STRUCTURED MULTILAYERS PRODUCED BY ATOMIC LAYER EPITAXY

    SBC: Multilayer Optics And X-ray            Topic: N/A

    MULTILAYER COATINGS VASTLY IMPROVE THE PERFORMANCE OF MOST X-RAY OPTICAL ELEMENTS AND ALLOW OPERATION AT ANGLES AND WAVELENGTHS OTHERWISE INACCESSIBLE. THEY HAVE BEEN USED SUCCESSFULLY IN ANALYTICAL INSTRUMENTS, ASTRONOMICAL TELESCOPES ON SATELLITES, AND IN PLASMA DIAGNOSTIC INSTRUMENTS, AND WILL LIKELY BE AN IMPORTANT COMPONENT OF X-RAY MICROLITHOGRAPHY EXPOSURE SYSTEMS IN THE SEMICONDUCTOR INDUS ...

    SBIR Phase II 1990 National Science Foundation
  10. PASSIVATION COATING OF REACTIVE SURFACES VIA RF PLASMA POLYMERIZATION AND FLUORINATION

    SBC: Polytronix Inc            Topic: N/A

    RF PLASMA DISCHARGE REACTORS WILL BE EMPLOYED TO DEPOSIT ANTICORROSIVE COATINGS AS PROTECTIVE LAYERS FOR A VARIETY OF SURFACE REACTIVE MATERIALS. SPECIFICALLY, THE COATINGS EMPLOYED WOULD INVOLVE EITHER DIRECT FLUORINATION OR PLASMA POLYMERIZED DEPOSITION OF PERFLUOROCARBONS MOLECULES. IN ADDITION TO PROVIDING PROTECTION FORM OXIDATIVE DEGRADATION,THESE COATINGS PROVIDE EXCELLENT MOISTURE PROTECTI ...

    SBIR Phase II 1990 National Science Foundation
US Flag An Official Website of the United States Government