List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. SBIR Phase I: Large Aperture, Periodically Poled, Hydrothermal Potassium Titanyl Phosphate for Highly Efficient Frequency Conversion of High-Power Solid-State and Fiber Lasers.

    SBC: ADVR, Inc            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project proposes to investigate the feasibility of fabricating large-aperture, periodic ferroelectric domain gratings for quasi-phase matched laser frequency conversion. The key innovation in this effort is the use of low temperature hydrothermally grown potassium titanyl phosphate (LTH-KTP) as the nonlinear optical substrate material. Using L ...

    SBIR Phase I 2003 National Science Foundation
  2. SBIR Phase I: Miniature NOx Sensor for Small Airborne Platforms

    SBC: Anasphere, Inc            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project is intended to develop a new type of NOx sensor for use on Unmanned Aerial Vehicles (UAVs) and other small aerial platforms. Many of these vehicles are quite small, and therefore have very limited space and weight allowances for instrument payloads - in fact, most traditional instruments used for real-time measurement of trace gas spe ...

    SBIR Phase I 2003 National Science Foundation
  3. SBIR Phase II: A Semiconductor Device for Direct and Efficient Conversion of Radioisotope Energy

    SBC: BetaBatt, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will fabricate a prototype betavoltaic battery in a form factor the size of a quarter coin. The goal will be to generate approximately 100 microwatts of electrical power in a volume less than half a cubic centimeter from a tritiated energy source. Research conducted for the Phase I portion of this project established the feasibility o ...

    SBIR Phase I 2003 National Science Foundation
  4. SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

    SBIR Phase II 2003 National Science Foundation
  5. SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

    SBIR Phase I 2003 National Science Foundation
  6. SBIR Phase I: Intelligent Learning Objects for Science Education

    SBC: Command Technologies, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project seeks to investigate the design of learning objects that are intelligent, activity-based, accessible and reusable. Intelligent tutoring systems have been shown to be instructionally effective in mathematics, science, and writing instruction. Intelligent tutoring systems, however, are often not practical due to the costs and resources ...

    SBIR Phase I 2003 National Science Foundation
  7. SBIR Phase I: New Heat Flow Sensor Development for High Throughput Microcalorimeters

    SBC: Energetic Genomics Corporation            Topic: N/A

    This Small Business Innovation Research Phase I project will yield a new heat flow or differential temperature sensing technology that will fundamentally improve micro-calorimeters and other instruments that depend on temperature measurement or control. The activity will complete the detailed design and fabrication of a new type of heat flow sensor having 10 to 100 times greater sensitivity than ...

    SBIR Phase I 2003 National Science Foundation
  8. SBIR Phase I: Lean Physics: Streamlining the Supply Chain Using Factory Physics

    SBC: Factory Physics, Inc.            Topic: N/A

    This Small Business Innovation Research Phase I project will investigate the feasibility of a new manufacturing improvement, planning and execution system that combines the data of a supply chain management system with the incentives of the lean manufacturing philosophy along with the author's own Factory Physics knowledge base in a systematic manner. The result will be a system containing implem ...

    SBIR Phase I 2003 National Science Foundation
  9. SBIR Phase I: Composite Structural Damage Self-Sensing via Electrical Resistance Measurement

    SBC: GLOBAL CONTOUR LTD.            Topic: N/A

    This Small Business Innovative Research Phase I project is an in-situ and real-time composite self-sensing and structural health monitoring (SHM) system/technique development with application of the multifunctional properties of composite structural carbon (graphite) fibers. Composite structural damage sensing and SHM are accomplished by measuring electrical resistance (conductivity) ...

    SBIR Phase I 2003 National Science Foundation
  10. SBIR Phase II: Continuous Flow Reactor and Size-Selection Chromagraphic Scheme for Use in High Throughput Manufacture of Silicon Nanoparticles

    SBC: Innovalight, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project is to continue the scale up of luminescent Si nanocrystal production using the continuous flow reactor developed during the Phase I period where the main objective of the Phase I proposal of converting a cumbersome batch process into an efficient continuous one was accomplished. This new continuous flow reactor will serve as an enabli ...

    SBIR Phase I 2003 National Science Foundation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government