List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. SBIR Phase I: Fiber Impregnation using Molten Thermoplastic Polymer Spray

    SBC: Adherent Technologies, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will develop a prepreg material that, while maintaining the advantages of a powder towpreg system, will eliminate the use of high price, finely ground powders. By generating fine particles in situ using aerosol formation from molten polymers two steps will be eliminated from the manufacturing process -- powder grinding and powder sin ...

    SBIR Phase I 2003 National Science Foundation
  2. SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

    SBIR Phase II 2003 National Science Foundation
  3. SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

    SBIR Phase I 2003 National Science Foundation
  4. SBIR Phase I: New Heat Flow Sensor Development for High Throughput Microcalorimeters

    SBC: Energetic Genomics Corporation            Topic: N/A

    This Small Business Innovation Research Phase I project will yield a new heat flow or differential temperature sensing technology that will fundamentally improve micro-calorimeters and other instruments that depend on temperature measurement or control. The activity will complete the detailed design and fabrication of a new type of heat flow sensor having 10 to 100 times greater sensitivity than ...

    SBIR Phase I 2003 National Science Foundation
  5. SBIR Phase I: Bio-based Design of Structural Ceramics

    SBC: Javelin3D, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will identify materials with desirable properties and performance standards. Rapid advances in communication technology, flight-based transportation, medical components and military strategy due to rapidly changing global alliances is pushing a need for materials that goes beyond current capabilities. This project will use advanced ...

    SBIR Phase I 2003 National Science Foundation
  6. SBIR Phase I: Non-Disruptive Radiometric Calibration of Array Sensors

    SBC: K & A Wireless, LLC            Topic: N/A

    This Small Business Innovative Research (SBIR) Phase I project proposes to establish the feasibility of merging a novel radiometrically-accurate nonuniformity correction (NUC) algorithm with the wireless infrared-sensor technology. As the low cost of uncooled amorphous-Si technology is accompanied with substantiated fixed-pattern noise (FPN), the proposed NUC capability is an enabling technology s ...

    SBIR Phase I 2003 National Science Foundation
  7. SBIR Phase I: Spray Forming Titanium Alloys Using the Cold Spray Process

    SBC: KTECH CORP.            Topic: N/A

    This Small Business Innovation Research Phase I project is focused on improving the material properties of spray formed titanium shapes using the Cold Spray process. Development of new, low-cost methods for direct fabrication of spray formed titanium shapes is critical for many industries and in particular, for manufacturing parts of expensive metals and alloys such as titanium. Direct fabric ...

    SBIR Phase I 2003 National Science Foundation
  8. SBIR Phase I: Electrochemical BioDetection Platform Utilizing Disposable Microfluidic Cartridges

    SBC: MesoSystems Technology, Inc.            Topic: N/A

    This Small Business Innovation Research Phase I project aims to develop a handheld automated biosensor for specific and sensitive detection and quantification of proteins and/or pathogenic cells in liquid samples. The biosensor will integrate highly-specific immunodiagnostics with ultra-sensitive electrochemical sensors in a microfluidic format, and will have the following features: (1) Quantit ...

    SBIR Phase I 2003 National Science Foundation
  9. SBIR Phase I: Membrane Reformer for Proton Exchange Membrane (PEM) Fuel Cells: Novel Application of Deposition Processes for Low-Cost Hydrogen Separation Membranes

    SBC: MesoSystems Technology, Inc.            Topic: N/A

    This Small Business Innovative Research (SBIR) Phase I project will focus on the development of economical processes to produce a highly selective, long life, low-cost hydrogen separation membrane for the purification of a fuel stream from a steam reforming fuel processor. Recently developed processes for rapid direct-write deposition processes will be applied to produce thin (

    SBIR Phase I 2003 National Science Foundation
  10. SBIR Phase II: Field Demonstration of a Novel Biotechnology for In-Situ Bioremediation of Methyl Tert-Butyl Ether (MTBE) in Groundwater

    SBC: MICROVI BIOTECH, INC.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project aims to develop a novel process for in-situ bioremediation of methyl tert-butyl ether (MTBE) in groundwater. The Environmental Protection Agency (EPA) considers MTBE a potential human carcinogen. Currently, MTBE's Maximum Contaminant Level (MCL) in drinking water has been set for 18 parts per billion. It is estimated that the cost of ...

    SBIR Phase I 2003 National Science Foundation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government