You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Intelligent Agents for Improved Ground-Test Operations

    SBC: 2LRESEARCH            Topic: N/A

    The proposal outlines a research program for developing a novel soft-computing technology composed of an Artificial Immune System and Bayesian Belief Networks for monitoring, knowledge and information processing, and decision support infrastructure for testing of rocket engines of future spacecrafts. An engine failure during test operations may cause catastrophic results for the test article, supp ...

    STTR Phase I 2006 National Aeronautics and Space Administration
  2. Hybrid Guidance System for Relative Navigation

    SBC: Advanced Optical Systems, Inc            Topic: S801

    Future NASA architectures and missions will involve many distributed platforms that must work together. This in turn requires guidance, navigation and control (GN&C) technology such as systems that determine spacecraft relative range and attitude. The proposed Hybrid Guidance System (HGS) will be such a system, providing increased relative navigation accuracy and robustness while reducing mass, vo ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  3. Monolithic, High-Speed Fiber-Optic Switching Array for Lidar

    SBC: ADVR, INC.            Topic: E102

    This NASA SBIR Phase II effort will develop a 1 x 10 prototype non-mechanical fiber optic switch for use with high power lasers. The proposed optical device is a fiber-based multi-channel switch to rapidly switch a fiber-coupled laser among ten output channels as an integral part of a fiber-based fixed-array laser transmitter for next-generation NASA lidar systems. The key innovation is the use ...

    SBIR Phase II 2006 National Aeronautics and Space Administration
  4. High Power Electro-Optic Modulator for Space-Based Applications

    SBC: ADVR, INC.            Topic: S406

    This Small Business Innovation Research Phase I effort will establish the feasibility of developing a fiber coupled, high power, electro-optically controlled, space qualified, phase modulator for the NASA Laser Interferometer Space Antenna (LISA). Specific to the LISA project is the use of three spacecraft, spanned by vast distances, to make gravitational wave measurements. A central aspect in mai ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  5. Damage Identification Algorithms for Composite Structures

    SBC: Aerobotix, Inc.            Topic: AF06097

    Current survivability and engineering requirements for airframe platforms necessitate the automated application of specialty coatings to the composite inlet duct OML surface. The specialty coatings have tight specification tolerances for the final thickness. Current equipment does not allow for accurate measuring of the specialty coatings. Measurement techniques and equipment need to be develop ...

    SBIR Phase I 2006 Department of DefenseAir Force
  6. Novel Non-Intrusive Vibration Monitoring System for Turbopumps

    SBC: AI Signal Research, Inc.            Topic: X601

    ASRI proposes to develop an advanced and commercially viable Non-Intrusive Vibration Monitoring System (NI-VMS) which can provide effective on-line/off-line engine vibration monitoring capabilities without relying on intrusive key-phasor speed measurements. Many powerful vibration signature analysis techniques for engine-health monitoring rely on key-phasor signals to extract/enhance critical fau ...

    SBIR Phase II 2006 National Aeronautics and Space Administration
  7. Protective Coating for Large-Diameter Bearing Races

    SBC: ARCOMAC SURFACE ENGINEERING, LLC            Topic: AF06088

    Critical large bearings in the F-35 thrust vector system must operate with absolute reliability under high loads, high heat and corrosive attack from salt air and fluorinated lubricant at elevated temperatures. A unique patented Filtered Arc Plasma Source Ion Deposition (FAPSID) process developed by Arcomac Surface Engineering will deposit an atomically bonded, multiple layered, integrated coatin ...

    SBIR Phase I 2006 Department of DefenseAir Force
  8. A Novel Electrokinetics-Driven, Integrated Microfluidic Cartridge for Sample Preparation from Complex Matrices

    SBC: CFD RESEARCH CORPORATION            Topic: HSB051001

    Sample preparation has been recognized as the single most important challenge to be faced in the development of detect-to-warn (DTW) systems (NRC, 2005). Available commercial sample preparation technologies are expensive, slow (30 min to 2 hours) and require trained laboratory technicians for operation. Addressing this need, we propose to design, fabricate, demonstrate, and validate a novel integr ...

    SBIR Phase II 2006 Department of Homeland Security
  9. Non-Dissipative LES Design Tool for Turbulent Combustion and Acoustics Analysis of Gas Turbine Combustors

    SBC: CFD RESEARCH CORPORATION            Topic: AF05178

    Combustion LES is a high fidelity CFD method that can analyze transient/acoustic challenges that previously were impossible to analyze with conventional CFD. However, excessive calculation times hinder the use of LES as an effective design tool. To make LES more practical, we propose to develop and validate a next generation combustion LES code that can solve 10M cell grids in less than one day, ...

    SBIR Phase II 2006 Department of DefenseAir Force
  10. A Comprehensive Modeling Tool for Cold Hearth Melting Processes

    SBC: CFD RESEARCH CORPORATION            Topic: AF05130

    Under AFRL Contract FA8650-05-M-5214 Phase I, CFDRC has developed and demonstrated the foundation of a comprehensive code for modeling the Cold Hearth Melting (CHM) processing of Titanium alloys. The code includes effects that accurately predict the transient temperature distribution, flow patterns, skull shape, species evaporation, and particle fates in the hearth region for a given set of dynam ...

    SBIR Phase II 2006 Department of DefenseAir Force
US Flag An Official Website of the United States Government