You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. NANOFIBER NONWOVEN BASED AIRCREW PERSONNEL LOWERING DEVICE

    SBC: 3F LLC            Topic: AF06020

    Nanofiber nonwoven spunbonded materials technology is adapted for use in a personnel lowering device. The resulting device will be simple, easy to use, and relatively low cost.

    SBIR Phase I 2006 Department of DefenseAir Force
  2. Portable Programmable Multifunction Body Fluids Analyzer

    SBC: ADVANCED LIQUID LOGIC            Topic: X1103

    Advanced Liquid Logic proposes to develop a very capable analyzer based on its digital microfluidic technology. Such an analyzer would be:  Capable of both simple and complex biological assays  Small, lightweight, power efficient, and easy to operate  Fully programmable and remotely reprogrammable Under NIH funding we have demonstrated clinical chemistry blood diagnostic testing on our ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  3. Single ply 3Dwoven Functionally Gradient Multi-Fiber / Multi-Matrix Composites with Thermal Management Systems

    SBC: 3TEX, Inc.            Topic: AF04249

    In composites, not only can properties vary with load direction, fiber based composites also offer the unique ability to tailor material properties locally. Localized matrix or fiber architecture changes can meet local mechanical, electrical, or thermal loads within a component or vehicle, without weight penalty or resort to additional external structures. In Phase I, the team used 3TEX 3-D wea ...

    SBIR Phase II 2006 Department of DefenseAir Force
  4. Novel Structural Joining Concepts Using 3-D Textile Preforms and Composites

    SBC: 3TEX, Inc.            Topic: AF05248

    Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson’s ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work is focused on develop ...

    SBIR Phase II 2006 Department of DefenseAir Force
  5. Gradient Interphase, 3-D Fiber Architecture CMC's

    SBC: 3TEX, Inc.            Topic: N/A

    A clear need exists for the next generation of Ceramic Matrix Composites (CMC) for Thermal Protection Systems (TPS), propulsion hardware, and other high temperature applications. No "off-the-shelf" materials and/or processes capable of meeting NASA's goals are available, yet completely integrating a unique combination of commercially available or nearly commercially available technologies can m ...

    STTR Phase I 2006 National Aeronautics and Space Administration
  6. Monolithic, High-Speed Fiber-Optic Switching Array for Lidar

    SBC: ADVR, INC.            Topic: E102

    This NASA SBIR Phase II effort will develop a 1 x 10 prototype non-mechanical fiber optic switch for use with high power lasers. The proposed optical device is a fiber-based multi-channel switch to rapidly switch a fiber-coupled laser among ten output channels as an integral part of a fiber-based fixed-array laser transmitter for next-generation NASA lidar systems. The key innovation is the use ...

    SBIR Phase II 2006 National Aeronautics and Space Administration
  7. High Power Electro-Optic Modulator for Space-Based Applications

    SBC: ADVR, INC.            Topic: S406

    This Small Business Innovation Research Phase I effort will establish the feasibility of developing a fiber coupled, high power, electro-optically controlled, space qualified, phase modulator for the NASA Laser Interferometer Space Antenna (LISA). Specific to the LISA project is the use of three spacecraft, spanned by vast distances, to make gravitational wave measurements. A central aspect in mai ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  8. Protective Coating for Large-Diameter Bearing Races

    SBC: ARCOMAC SURFACE ENGINEERING, LLC            Topic: AF06088

    Critical large bearings in the F-35 thrust vector system must operate with absolute reliability under high loads, high heat and corrosive attack from salt air and fluorinated lubricant at elevated temperatures. A unique patented Filtered Arc Plasma Source Ion Deposition (FAPSID) process developed by Arcomac Surface Engineering will deposit an atomically bonded, multiple layered, integrated coatin ...

    SBIR Phase I 2006 Department of DefenseAir Force
  9. Recycling Composite Scrap and Waste Materials

    SBC: FIREBIRD ADVANCED MATERIALS, INC.            Topic: AF06081

    Recycling of composites manufacturing scrap and end-of-life waste is expected to become more important as the use of composite materials expands into different applications. Carbon Fiber Reinforced Polymer (CFRP) wastes especially are a potentially valuable source of recycled carbon fibers if an economic and environmentally friendly technology for recycling these fibers can be developed. The Pha ...

    SBIR Phase I 2006 Department of DefenseAir Force
  10. Recognizing Target Variants Using Transformational Adaptivity

    SBC: GENERAL INTELLIGENCE CORP.            Topic: AF05219

    Target variation presents a challenge for Automatic Target Recognition (ATR) based on fixed models or signatures. In Phase I General Intelligence refined and applied an extension of the map-seeking circuit (MSC) architecture to recognize articulations, plausible morphs and aggregations of target models. The extended MSC architecture implements a process termed “transformational adaptivity,” ...

    SBIR Phase II 2006 Department of DefenseAir Force
US Flag An Official Website of the United States Government