List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Intelligent Power Source Reliability Monitoring and Failure Mitigation System

    SBC: Alphacore, Inc.            Topic: T3

    Alphacore Inc. will develop a high-accuracy built-in self-test (BIST) system for characterization of aging, degradation, available power and in-situ diagnosis of photovoltaic and multi-pack battery systems using low-complexity single-chip impedance spectroscopy (IS) approach. Alphacore will collaborate with Arizona State University (ASU) scientists to develop a low complexity single-chip photovolt ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. Bio-inspired Cellular Material Optimization for the Design of Additively Manufactured Multi-Functional Lightweight Structures

    SBC: Phoenix Analysis and Design Technologies, Inc.            Topic: T3

    New technologies in imaging and manufacturing, including Additive Manufacturing (AM), are opening possibilities for mimicking biological structures in a way that has been unprecedented in human history. The primary innovation proposed here is the development of a tool that generates bio-inspired, parametrically optimized cellular materials for integration into the design of Additively Manufactured ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  3. Discrete Time State-Space Aeroservoelastic Modeling using FUN3D

    SBC: Zona Technology, Inc            Topic: A1

    CFD-based reduced order modeling (ROM) has been an active research area, as they can be used directly with common linear flutter analysis tools. Among them, linearized reduced-order modeling approaches rely on linearization of the nonlinear unsteady aerodynamic flow equations, assuming that the amplitude of the unsteady motion is limited to small perturbations about the nonlinear steady-state flow ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  4. Tunable Single Frequency UV Laser

    SBC: AdValue Photonics Inc            Topic: S1

    Compact and rugged single-frequency pulsed UV lasers are needed for measurement of ozone and the hydroxyl radicals (OH). The determination of the concentration of OH in the atmosphere is central to the understanding of atmospheric photochemistry. The goal for this SBIR Phase program is to demonstrate and build a highly robust high-power fast-tuning single frequency pulsed UV laser near 308nm for O ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. Wafer Level Hybrid Interconnect Aligned (Cu/Oxide) Bonding for 3D Integration of Heterogenous (Si/GaAs) Submillimeter-Wave Arrays

    SBC: Cactus Materials Llc            Topic: S1

    The objective of this work is to develop millimeter wave arrays with ultra-high accuracy alignment (<300nm) using hybrid aligned bonding. Currently, most submillimeter-wave array systems utilize a single pixel both for space as well as ground applications. While these approaches are workable for the near-term, they will become unsustainable as pixel count is increased. In addition, the shear ma ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. Flexible Radiator (FlexRAD)

    SBC: Paragon Space Development Corporation            Topic: Z2

    Paragon proposes development of Flexible Radiator (FlexRAD) technology for integration with inflatable habitats.  A pumped fluid loop radiator is composed of the fluid loop tubing which carries coolant for heat exchange, facesheets which provide extended surface area for radiative heat rejection, and inlet and outlet manifolds to connect individual sets of tubing.  For a radiator to be f ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. Condensate Separator for MIcrogravity Conditions (COSMIC)

    SBC: Paragon Space Development Corporation            Topic: Z2

    Paragon Space Development Corporation (Paragon) proposes the development of an advanced COndensate Separator for MIcrogravity Conditions (COSMIC). COSMIC is a full flow condensate separator designed to separate condensate from air effectively and with low power use.  This technology employs Paragon’s unique and robust, low power liquid separation technology that has heritage in and has ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. Active Battery Management System with Physics Based Life Modeling Topology

    SBC: Electric Power Systems LLC            Topic: A2

    Robust Data Acquisition on flight applications enables Researchers to rapidly advance technology. Distributed Electric Propulsion (DEP) and Hybrid Electric architectures rely heavily on batteries to achieve fuel efficiency and reduced CO2 emissions. DEP Aircraft of the future have demands for Energy Storage Systems with large counts of cells put in series and parallel to achieve needed voltage and ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  9. Lightweight High Energy Density Capacitors for NASA AMPS and PPUs

    SBC: SIGMA TECHNOLOGIES INTERNATIONAL GROUP, INC.            Topic: S3

    All NASA Power Processing Units (PPUs) including DC to DC and DC to AC converters and inverters require a DC-link capacitor, placed between the DC source (PV solar array or battery) and the switching power semiconductors.  NASA technical personnel has identified a failure mode in Multi-Layer Ceramic (MLC) DC-link capacitors currently used in PPUs that can cause them to short.   Poly ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  10. 1.57 Micron High Pulse Energy Single Frequency Fiber Laser

    SBC: AdValue Photonics Inc            Topic: S1

    We propose to demonstrate and build a 1.572 micron single frequency high pulse energy and high peak power fiber laser by using an innovative Er-doped gain fiber with large core diameter and high gain per unit length. 1.572 micron single frequency high energy and high peak power fiber laser is needed for accurately measuring column CO2 concentrations. In Phase II, we will optimize the doping concen ...

    SBIR Phase II 2018 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government