List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Underwater Adhesive for Coral Restoration

    SBC: METNA CO            Topic: 9201

    Coral transplantation is a primary management option for rehabilitation of degraded reefs. Stabilization (via adhesion, etc.) of transplants on existing reef or artificial substrates notably improves their survival rate. Improved underwater adhesives are needed for expedient and convenient stabilization of coral transplants with improved survival rate. A new hybrid organic-inorganic adhesive is pr ...

    SBIR Phase I 2019 Department of CommerceNational Oceanic and Atmospheric Administration
  2. Feedback Sensors for Closed Loop Additive In-Space Manufacturing

    SBC: Cybernet Systems Corporation            Topic: H7

    This solicitation calls for online quality control to be applied to In-Space Manufactured (ISM) additive manufactured parts.  Our proposed approach is integrated precision scanning of the additive manufactured (AM) parts and feedback of that data back into AM layer by layer process control.  The goal is to augment Space Manufacturing AM process controls with verifiable feedback enabling ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  3. Ultra-Compact, Field-Deployable, Quantum-Compatible Receiver for Free-Space Optical Communication

    SBC: Quantum Opus, LLC            Topic: H9

    Quantum Opus is excited to propose compactifying, enclosing, and automating ALL of the required vacuum, cryogenics, and electrical systems of a superconducting nanowire single-photon detection system into a 14-inch tall by 17-inch wide by 18-inch deep package and re-engineering the optical collection mechanisms to be compatible with existing NASA telescope infrastructure. The end product will be a ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  4. Three Band Thermal Infrared Detector for CubeSats and UAS

    SBC: XIOMAS TECHNOLOGIES, L.L.C.            Topic: S1

    The overall objective of the SBIR is to develop a high performance, inexpensive, three-band thermal infrared camera system, suitable for deployment in Unmanned Airborne Systems and CubeSats.  This imaging system will be capable of mapping thermal features on the surface of the earth with a high revisit rate and high spatial resolution.  Xiomas believes the Three Band Infrared Detector (T ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. Dust-Free Fabrication of Uranium and Plutonium Oxide Powders for Radioisotope Systems, Nuclear Thermal Rockets, Nuclear Electric Propulsion, and Surface Power Reactors

    SBC: Amphionic LLC            Topic: Z10

    This SBIR project will develop a manufacturing method for nuclear fuels that can be universally applied for space-power systems that utilizes a dust-free uranium oxide production unit.  For the particular application to nuclear thermal propulsion, in which one wishes, (1) to maximize hydrogen propellant heating, and (2) to reduce fission product gas release and reactor particulates into ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. Bifunctional Membrane for High Energy, Long Shelf Life Li-S Batteries

    SBC: Navitas Advanced Solutions Group, LLC            Topic: Z1

    The adoption of high energy lithium sulfur batteries hinges on significant improvements in charge/recharge cycle life.  Cycle life is limited by migration of dissolved polysulfide species which creates an electrochemical short circuit.  In this NASA SBIR, Navitas Systems proposes to develop an atomically precise and bifunctional membrane separator for lithium sulfur batteries that impede ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  7. Auralization of Vertical Take-Off and Landing (VTOL) in Urban Environments

    SBC: Great Lakes Sound & Vibration, Inc.            Topic: A1

    The topic defines the problem as the development and demonstration of computationally efficient tools capable of modeling sound propagation in an urban environment for creating auralizations of UAM vehicles. The tools would be suitable for eventual integration with the NASA Auralization Framework (NAF).The topic requires a set of modules to be delivered which will integrate with existing NAF infr ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. Low Cost Resin for Self-Healing High Temperature Fiber Reinforced Polymer Matrix Composites

    SBC: HARP ENGINEERING LLC            Topic: A107

    Over the past few decades, the manufacturing processes and our knowledge base for predicting the bulk mechanical response of fiber reinforced composite materials has matured and opened the capability to design lightweight materials. The rapid development and progress of composites technology has been spawned by the high specific strength, stiffness, and toughness offered with respect to other eng ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  9. Holonic Spacecraft Autonomous Agents

    SBC: Cybernet Systems Corporation            Topic: H603

    In this proposal, Cybernet proposes to leverage our distributed Procedure Execution and Projection (PEP) system that focuses on supporting automation of complex spacecraft, subsystem, maintenance, and consumables management procedures while ensuring crew situational awareness and anticipating future problems. The PEP system will provide the capability to: ? Work in a dynamic collaborative manner w ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  10. AGILE Etalon Filter for Differential Absorption LIDAR

    SBC: Michigan Aerospace Corporation            Topic: S101

    Modern sensing systems often are required to pick out a very specific wavelength in a sea of other light (such as in daylight), making precise optical filtering a vital part of many sensing systems. Michigan Aerospace Corporation (MAC) plans to design, build and test an agile, frequency-tunable Fabry-Perot interferometer (etalon) for use as an optical filter of background light as part of a Differ ...

    SBIR Phase I 2017 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government