List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Optical Line Filter and Spectrometer based Upon Two-Photon Absorption for Doppler LIDAR at 1.053 um

    SBC: ESPYLUX LLC            Topic: S1

    A receiver system for use in LIDAR consisting of an optical filter and optical spectrometer based upon two-photon absorption is proposed.  The filter and spectrometer both use dispersion from excited state transitions of atomic rubidium  to create a birefringent medium. The birefringent medium of the optical filter rotates the polarization of light so that it is transmitted through cross ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  2. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: ORBIS SIBRO, INC.            Topic: DLA171002

    ORBIS proposes to Address SBIR DLA171-002 by developing efficient and effective processes to reverse engineer RPPOB Candidate Items. ORBIS has a wealth of experience in supporting DoD systems and components and is well suited to addressing the backlog of unsupported equipment .

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Increase Competition through Small Business Source Approval Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI)

    SBC: FORM FIT AND FUNCTION LLC            Topic: DLA172001

    This SBIR Phase I proposal to the Defense Logistics Agency (DLA), requests funding for Form Fit and Function, LLC, a small disadvantaged, HUBZone Certified Business, to perform research in the development of an SAR package for NSN 3020-01-560-8493, Pulley, Groove.F3's proven experience in manufacturing and SAR package development, give F3 an advantage in development and decreases Government risk. ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Tamper Resistant/Anti-Counterfeit Package Labeling

    SBC: Tetramer Technologies,L.L.C.            Topic: DLA163003

    Tetramer Technologies, LLC, an advanced materials R&D company in South Carolina, will develop a novel security pigment and ink to be used in the production of tamper-evident and anti-counterfeit labelling and packaging. Current security inks often require extensive training or expensive equipment to be validated. Tetramer will model the desired novel pigment properties, synthesize pigments with th ...

    SBIR Phase I 2017 Department of DefenseDefense Logistics Agency
  5. Medical 3D Printing

    SBC: REIFY, LLC            Topic: DLA152002

    This project aims to create a commercially viable 3D printed prosthetic product line which is superior, cost effective and more efficiently utilizes clinician time. Phase 1 demonstrated the feasibility of a process that uses a low-cost 3D scanner to capture limb shapes, converts the scan data into a computer model file of the 3D printable socket, and prints a strong, durable socket that can be mou ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  6. Fail-Safe, Controllable Liquid Spring/Damper System for Improved Rover Space Vehicle Mobility

    SBC: Advanced Materials and Devices            Topic: H601

    NASA is planning to return to the moon in 2020 to explore thousands of miles of the moon?s surface with individual missions, lasting six months or longer. Surface mobility is critical to outpost buildup and exploration activities, where the change in the vehicle weight between unloaded and loaded cargo conditions and travel over rough terrain can adversely affect the ride handling conditions and ...

    SBIR Phase I 2016 National Aeronautics and Space Administration
  7. SYSTEM AND PROCESS FOR 3D PRINTING PROSTHETIC COMPONENTS

    SBC: REIFY, LLC            Topic: DLA152002

    Orthotics and Prosthetic (O&P) clinics serve as the primary facilities at which 1.9 million U.S. amputees receive care. The design and fabrication of custom prosthetic devices is an integral part of how these O&P facilities provide patient care. Current prosthetic fabrication methods are costly and labor intensive, relying heavily on traditional manual manufacturing techniques. 3D-scanning and pri ...

    SBIR Phase I 2016 Department of DefenseDefense Logistics Agency
  8. Fabrication of T-SOFC via Freeze Cast Methods for Space and Portable Applications

    SBC: Yanhai Power LLC            Topic: H801

    As NASA space missions become longer in duration the need for high efficiency power generator sets that can operate on NASA logistical fuel become critical. Historically NASA has used fuel cells as part of the energy solution. Space bound energy and power systems require rapid start and stop cycle times as well as high power densities. The high operational efficiency, coupled with the use of logi ...

    SBIR Phase II 2015 National Aeronautics and Space Administration
  9. A Green, Safe, Multi-Pulse Solid Motor (MPM) for CubeSats

    SBC: Digital Solid State Propulsion, Inc            Topic: S302

    Today's CubeSats lack storable, green, safe propulsion options for complex science missions that may involve large Delta-V changes, proximity operations, and attitude control systems (ACS) for pointing, spin-up, and spin-down. Digital Solid State Propulsion (DSSP) is developing propulsion for CubeSats and will leverage existing research efforts into a new system for NASA. A key technology identifi ...

    SBIR Phase II 2015 National Aeronautics and Space Administration
  10. Green Electric Monopropellant (GEM) Fueled Pulsed Plasma Thruster

    SBC: Digital Solid State Propulsion, Inc            Topic: S302

    Digital Solid State Propulsion is proposing the development of a new liquid Pulsed Plasma Thruster (PPT) using its revolutionary HAN-based Green Electric Monopropellant (GEM) to enable spacecraft missions whose fulfillment requires the high specific impulse of conventional Telfon-fueled PPTs, but would like the flexibility in mission design that liquid fueled systems allow. DSSP's GEM propellant i ...

    SBIR Phase I 2015 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government