List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Acoustic Test Method for Turbofan Engine Exhaust Systems at Cruise Conditions

    SBC: Aero Systems Engineering, Inc.            Topic: A201

    The exhaust flow from a turbofan engine operating at typical cruise conditions generates noise as turbulent flow interacts with the basic shock cell pattern. This can be a significant source of noise within the aircraft cabin. The proposed innovation is a new method for testing the acoustics of model scale turbofan engine exhaust systems at cruise conditions in a transonic wind tunnel. This would ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  2. Embedded TCP Agents for Near-Earth Communications

    SBC: ARCHITECTURE TECHNOLOGY CORPORATION            Topic: E204

    Architecture Technology Corporation (ATC) will design, model, implement, and demonstrate extensible, embedded agents that will continuously adapt the behavior of the Internet-standard Transmission Control Protocol (TCP) to the unique requirements of near-Earth space communications. These embedded agents will enable TCP to adapt its behavior based on exogenous information, such as satellite epheme ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  3. Affordable High Power Density Engine Designs for Personal Air Vehicles

    SBC: GSE, Inc.            Topic: T701

    Next generation General Aviation (GA) Sport Class air vehicles limited to 1200lbs, represent the first opportunity to overhaul the FAA certification process necessary to manufacture affordable aircraft. With propulsion representing over one-third of the direct manufacturing costs of the entire aircraft, dramatic reductions in aircraft engine costs must be achieved by design, economy of scale, and ...

    STTR Phase I 2004 National Aeronautics and Space Administration
  4. An Integrated Heavy Fuel Piston Engine Ducted Fan Propulsion Unit for Personal Air Vehicles

    SBC: GSE, Inc.            Topic: T701

    The proposed PAVE propulsion system technology demonstration combines an innovative high-speed aero-diesel engine with a novel ducted fan assembly resulting in a low noise/cost and high performance propulsion system. The core engine makes extensive use of a novel self-injection, compression ignition/combustion system capable of high-speed operation on kerosene-based fuels without degradation due ...

    STTR Phase I 2004 National Aeronautics and Space Administration
  5. Miniature Intelligent Sensor Electronics

    SBC: NVE CORP. (FORMERLY NONVOLATILE ELECTRONICS, INC.            Topic: A504

    The proposed development will integrate data acquisition electronics with a relatively high performance processing capability and a large amount of memory, all in a miniature package, yielding a miniature, intelligent, sensor electronics module. This combination allows embedding of intelligent functions on sensors, providing the capability to implement data pre-processing and health monitoring of ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  6. Ultraviolet AlGaN-based Avalanche Photo Diode Grown over Single Crystal Bulk AlN Substrates

    SBC: Sensor Electronic Technology, Inc.            Topic: E101

    Premature breakdown is a key obstacle in developing AlGaN-based avalanche photo diodes (APD) for ultraviolet (UV) light detection. Novel materials growth techniques, such as Hydride Vapor Phase Epitaxy (HVPE) allows for reduction of dislocation density only to approximately 10^7 cm-2. In order to reduce the number of growth defects and dislocation density in AlGaN-based APDs we will use single cry ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  7. High-Frequency, Low-Noise Nitride-Based Power Transistors Grown on Bulk III-N

    SBC: SVT ASSOCIATES, INCORPORATED            Topic: E204

    Electronics circuits that can function in very high temperatures (> 450?C) are needed for a number of applications including automotive and turbine engine control, industrial high-temperature processing, geothermal and deep-well oil drilling, satellite power management systems, and future planetary missions to Venus and Mercury. The key electronic components for these applications include 1) an i ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  8. N/A

    SBC: Advanced Bionics, Inc.            Topic: N/A

    N/A

    SBIR Phase I 2000 National Aeronautics and Space Administration
  9. N/A

    SBC: GSE, Inc.            Topic: N/A

    N/A

    SBIR Phase I 2000 National Aeronautics and Space Administration
  10. N/A

    SBC: NVE CORP. (FORMERLY NONVOLATILE ELECTRONICS, INC.            Topic: N/A

    N/A

    SBIR Phase I 2000 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government