You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: ORBIS SIBRO INC            Topic: DLA171002

    ORBIS proposes to Address SBIR DLA171-002 by developing efficient and effective processes to reverse engineer RPPOB Candidate Items. ORBIS has a wealth of experience in supporting DoD systems and components and is well suited to addressing the backlog of unsupported equipment .

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Increase Competition through Small Business Source Approval Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI)

    SBC: Form Fit and Function LLC            Topic: DLA172001

    This SBIR Phase I proposal to the Defense Logistics Agency (DLA), requests funding for Form Fit and Function, LLC, a small disadvantaged, HUBZone Certified Business, to perform research in the development of an SAR package for NSN 3020-01-560-8493, Pulley, Groove.F3's proven experience in manufacturing and SAR package development, give F3 an advantage in development and decreases Government risk. ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Innovative Ultra Violet and Ozone Resistant Material for Hydraulic Clamp Cushions

    SBC: TETRAMER TECHNOLOGIES LLC            Topic: N181021

    Tetramer Technologies, a specialty materials research company, aims to develop a more robust elastomer material for cushioned clamps used by the Navy. Cushioned clamps serve an important role in securing hydraulic, fuel, and electrical lines in Navy aircraft. The existing cushions have shown sporadic and unreliable breakdown in use, despite being rated to a rigorous MIL standard. Tetramer proposes ...

    SBIR Phase I 2018 Department of DefenseNavy
  4. Optical Line Filter and Spectrometer based Upon Two-Photon Absorption for Doppler LIDAR at 1.053 um

    SBC: ESPYLUX LLC            Topic: S1

    A receiver system for use in LIDAR consisting of an optical filter and optical spectrometer based upon two-photon absorption is proposed. The filter and spectrometer both use dispersion from excited state transitions of atomic rubidium to create a birefringent medium. The birefringent medium of the optical filter rotates the polarization of light so that it is transmitted through crossed polariz ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. Characterization of Piezoelectric Fibers for Sensing Shock Waves from Underwater Explosions

    SBC: ADVANCED MATERIALS & DEVICES            Topic: DHA17C002

    This Small Business Technology Transfer (STTR) Phase I effort will demonstrate the feasibility of using piezoelectric fibers to detect shock waves from underwater explosions (UNDEX) and sensing physiological measures such as heart and respiratory rates on warfighters. Piezoelectric fibers will be characterized for their ability so sense different amplitudes and frequencies of shock and vibration. ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  6. Tightly Coupled Oscillator and GPS Receiver

    SBC: Jackson Labs Technologies, Inc.            Topic: A17051

    Legacy GPS receivers do not make use of the disciplined atomic oscillator flywheel output in GPS Disciplined Oscillator systems. The attached proposal shows how the disciplined oscillator signal can be used to improve GPS carrier and code tracking, mitigate multipath, jamming and spoofing, and to detect GPS receiver and satellite system anomalies. Using the disciplined oscillator as the frequency ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. High-affinity monoclonal antibodies that target Burkholderia Polysaccharide

    SBC: DXDISCOVERY INC            Topic: CBD14105

    The purpose of this contract is to develop high affinity antibodies that are specific to Burkholderia surface expressed polysaccharides. These monoclonal antibodies (mAbs) can then be used to develop diagnostics and therapeutics for melioidosis and glanders; two infectious diseases caused by the Tier 1 biothreats Burkholderia pseudomallei and mallei, respectively. The SBIR funded work to date deve ...

    SBIR Phase II 2018 Department of DefenseOffice for Chemical and Biological Defense
  8. Tightly Coupled Oscillator and GPS Receiver

    SBC: Jackson Labs Technologies, Inc.            Topic: A17051

    GPS Disciplined Oscillator (GPSDO) systems traditionally combine the 1PPS output from a GPS receiver and highly stable clock like a Chip Scale Atomic Clock (CSAC) to steer the local clock frequency to match the frequency and phase of the GPS-generated 1PPS. However, the GPS receiver does not take advantage of the stable Chip Scale Atomic Clock for improved GPS receiver resilience, improved positio ...

    SBIR Phase II 2018 Department of DefenseArmy
  9. Non-Pyro Electric Small Arms Fire Simulator

    SBC: Digital Solid State Propulsion, Inc            Topic: A18091

    Digital Solid State Propulsion Inc. is proposing the development of a reusable electric blank system that leverages over 10 years of success in formulating, engineering, and manufacturing Electric Solid Propellants for the space, defense, and entertainment industries. DSSP already has a pyrotechnic solution to battlefield effects simulating small arms fire based on eSquib technology, however, for ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. ADVANCE GUN BARREL TECHNOLOGY THROUGH PLASMA SURFACE ALLOYING

    SBC: Plaur Corp            Topic: N/A

    THE HOSTILE ENVIRONMENT EXISTING AT THE BORE SURFACE OF GUN BARRELS USED IN HIGH RATE OF FIRE AIRCRAFT CANNONS PRESENTS A FORMIDABLE DESIGN CHALLENGE TO THE GUN DESIGNER. HEAT, FRICTION, CORROSION AND WEAR AT THE BORE SURFACE ACT IN UNISON TO RAPIDLY DETERIORATE THE BORE. CHROME PLATING IS PRESENTLY THE ONLY COST EFFECTIVE METHOD OF IMPROVING BORE SURFACE LIFE. PLASMA SURFACE ALLOYING IS AN EMERGI ...

    SBIR Phase I 1990 Department of DefenseAir Force
US Flag An Official Website of the United States Government