List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Bifunctional Regenerative Electrochemical Air Transformation for Human Environments

    SBC: Skyre, Inc.            Topic: T6

    The proposed  Bifunctional Regenerative Electrochemical Air Transformation for Human Environments (BREATHE) for life support and habitation is part of the atmosphere revitalization equipment necessary to provide and maintain a livable environment within the pressurized cabin of crewed spacecraft. Sustainable Innovations (SI) has developed a novel solid state technology for gas compression bas ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. Model-Based Design Assessment and FM Visualization Technologies in TEAMS

    SBC: QUALTECH SYSTEMS, INC.            Topic: S5

    NASA's FM community has identified one of the major problems with FM on the Science Mission Directorate (SMD) missions being that the complexity of FM has often been discovered late in the system development during testing, or in other cases in flight itself requiring unplanned, major spikes in resources to ensure that it will work properly and not create failures in the system that it is tryi ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  3. In-Situ Electrospray Capture of Organic Bearing Particulates from Comets and Celestial Bodies

    SBC: Connecticut Analytical Corporation            Topic: S1

    NASA has need for technologies that can enable sampling from asteroids and from depth in a comet nucleus, improved in-situ analysis of comets. It has been identified that there is also a requirement for improved dust environment measurements & particle analysis, small body resource identification, and/or quantification of potential small body resources (e.g., oxygen, water and other volatiles, ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  4. In-Situ Electrospray Capture of Organic Bearing Particulates from Alien Water Fountains

    SBC: Connecticut Analytical Corporation            Topic: S4

    NASA has need for technologies that can enable sampling from water jets, such as those observed emanating from the moon Enceladus and from the moon Europa. We propose to leverage past observations of the ability of electrospray ionization to capture and concentrate polar or polarizable trace species without damage, and combine that knowledge with recent discoveries in developing a hypervelocity ic ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. Internal/External Surface Finishing of Additively Manufactured IN-625 Components

    SBC: Rem Chemicals, Inc.            Topic: Z3

    The objective of this proposal is to develop a surface finishing technology for Inconel 625 Additive Manufactured (AM) workpieces.   The following methodologies will be evaluated and optimized: vibratory finishing, chemical milling and electropolishing.  Once optimized, the project will explore combinations of these aforementioned methodologies in order to identify a surface finishi ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. Textile Strain Measurement System

    SBC: KATABASIS ENGINEERING LLC            Topic: Z11

    Current evaluations of stress in textile parachute structures rely heavily on analytical estimation without adequate data collection means to validate or improve simulations.  Features of available data acquisition tools are too limited to facilitate “live” stress measurement of parachute textiles in operation.  Advancements in microelectronics and electronics infused "E ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. Innovative, Rapidly Regenerable, Structured Trace-Contaminant Sorbents Fabricated Using 3D Printing

    SBC: Advanced Fuel Research, Inc.            Topic: H4

    The NASA objective of expanding the human experience into the far reaches of space requires regenerable life support systems. This proposal addresses the fabrication of structured (monolithic), carbon-based trace-contaminant (TC) sorbents for the space suit used in Extravehicular Activities (EVAs). The proposed innovations are: (1) the use of thin-walled, structured carbon TC sorbents fabricated u ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. Solid State Oxygen Concentrator and Compressor

    SBC: Sustainable Innovations, LLC            Topic: H303

    Sustainable Innovations has developed a novel solid state technology for gas separation and will be applying it for the first time to meet a critical life support function: to develop an oxygen concentration module that minimize the hardware mass, volume, and power footprint while still performing at the required NASA capabilities. The Sustainable Innovations Oxygen Concentration Module is an exte ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  9. Flexible Integrated System Health Management for Sustainable Habitats using TEAMS

    SBC: QUALTECH SYSTEMS, INC.            Topic: H601

    QSI proposes to field a "Flexible" ISHM Solution for Sustainable Habitats utilizing the TEAMS Toolset and concomitant model-based and data-driven diagnostic/prognostic reasoning technologies to enable the habitat crew to obtain crucial alerts that affect the operation of critical habitat subsystems, as well as provide decision support in the selection of appropriate corrective actions. The solutio ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  10. Electro-Kinetic Ice Gun for Frozen Ice Plume Simulations

    SBC: Connecticut Analytical Corporation            Topic: S111

    This proposal evolved as a result of a conversation with a NASA scientist regarding plans for a mission to Europa to seek signs of life based on observed water plume emissions. With Jupiter as a bright light behind the moon, NASA was able to observe Europa in silhouette, and with ultraviolet light saw what appeared to be evidence of the plumes. If plumes exist, this is an exciting find, lead resea ...

    SBIR Phase I 2017 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government