List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Bifunctional Regenerative Electrochemical Air Transformation for Human Environments

    SBC: Skyre, Inc.            Topic: T6

    The proposed  Bifunctional Regenerative Electrochemical Air Transformation for Human Environments (BREATHE) for life support and habitation is part of the atmosphere revitalization equipment necessary to provide and maintain a livable environment within the pressurized cabin of crewed spacecraft. Sustainable Innovations (SI) has developed a novel solid state technology for gas compression bas ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. Multi-Spectral Infrared Focal Plane Array For Wildfire And Burning-Biomass Analysis

    SBC: QmagiQ, LLC            Topic: S1

    An important NASA mission is to remotely analyze fires, such as wildfires and burning biomasses, for their chemical content. The chemical species of most interest have infrared spectral signatures at wavelengths ranging from 1.5 microns to 12 microns. A broadband infrared focal plane array (FPA) with that spectral coverage and high quantum efficiency is a key technology to enable this mission. Qma ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  3. Optically Interrogated Thin Film Strain Gauge for Balloon

    SBC: CREARE LLC            Topic: S3

    To support development of atmospheric balloons and gossamer structures, NASA requires a capability for real-time, dynamic strain measurement in thin polymeric membranes during deployment and flight.  This capability will provide quantitative test data to inform balloon design efforts, as well as enable real-time monitoring of material state during flight.  Existing technologies include w ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  4. High Efficiency 4 K Cryocooler for Space Missions

    SBC: CREARE LLC            Topic: S1

    Future astrophysics missions require efficient, low-temperature cryocoolers to cool advanced instruments or serve as the upper stage cooler for sub-Kelvin refrigerators. Potential astrophysics missions include Lynx, the Origin Space Telescope, and the Superconducting Gravity Gradiometer. Cooling loads for these missions are up to 300 mW at temperatures of 4 to 10 K, with additional loads at higher ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. Model-Based Design Assessment and FM Visualization Technologies in TEAMS

    SBC: QUALTECH SYSTEMS, INC.            Topic: S5

    NASA's FM community has identified one of the major problems with FM on the Science Mission Directorate (SMD) missions being that the complexity of FM has often been discovered late in the system development during testing, or in other cases in flight itself requiring unplanned, major spikes in resources to ensure that it will work properly and not create failures in the system that it is tryi ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. ASOMIS

    SBC: APPLIED GEOSOLUTIONS LLC            Topic: S5

    The innovation of the Agricultural SOil Moisture and Irrigation Status (A·SOM·IS) platform is the development of operational and moderate resolution mapping and assessment of soil moisture, irrigation status (irrigated vs not), and crop water stress metrics at field scale for agricultural decision support tools. The platform focuses on utilization of Synthetic Aperture Radar (SAR) an ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. A Compact, Lightweight Electrically Driven Propellant Pump with High Pressure Rise

    SBC: CREARE LLC            Topic: S4

    Reducing the inert mass of propulsion systems in sample return spacecraft will reduce their launch costs and increase opportunity for these missions. Compared to a pressure-fed system, a propellant pump-fed system can significantly reduce overall propulsion system mass, especially for a system with high propellant throughput. To address this need, we propose to develop a compact, lightweight elect ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. In-Situ Electrospray Capture of Organic Bearing Particulates from Comets and Celestial Bodies

    SBC: Connecticut Analytical Corporation            Topic: S1

    NASA has need for technologies that can enable sampling from asteroids and from depth in a comet nucleus, improved in-situ analysis of comets. It has been identified that there is also a requirement for improved dust environment measurements & particle analysis, small body resource identification, and/or quantification of potential small body resources (e.g., oxygen, water and other volatiles, ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  9. In-Situ Electrospray Capture of Organic Bearing Particulates from Alien Water Fountains

    SBC: Connecticut Analytical Corporation            Topic: S4

    NASA has need for technologies that can enable sampling from water jets, such as those observed emanating from the moon Enceladus and from the moon Europa. We propose to leverage past observations of the ability of electrospray ionization to capture and concentrate polar or polarizable trace species without damage, and combine that knowledge with recent discoveries in developing a hypervelocity ic ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  10. Internal/External Surface Finishing of Additively Manufactured IN-625 Components

    SBC: Rem Chemicals, Inc.            Topic: Z3

    The objective of this proposal is to develop a surface finishing technology for Inconel 625 Additive Manufactured (AM) workpieces.   The following methodologies will be evaluated and optimized: vibratory finishing, chemical milling and electropolishing.  Once optimized, the project will explore combinations of these aforementioned methodologies in order to identify a surface finishi ...

    SBIR Phase I 2018 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government