You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Bifunctional Regenerative Electrochemical Air Transformation for Human Environments

    SBC: Skyre, Inc.            Topic: T6

    The Bifunctional Regenerative Electrochemical Air Transformation for Human Environments (BREATHE) for life support and habitation is part of the atmosphere revitalization equipment necessary to provide and maintain a livable environment within the pressurized cabin of crewed spacecraft. nbsp;BREATHE is a low-power electrodialysis-based concept for regenerating a liquid carbon dioxide scrubbing mat ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  2. A Blubber or Dorsal Fin Piercing Tag Attachment System for Remotely-Deployed Cetacean Tags

    SBC: American Benchmark Machine Works            Topic: 824

    Animal-borne electronic instruments (tags) are critical tools for monitoring the behavior and ecology of cetaceans, providing data needed for managing their populations and mitigating the threats they face. Although remote-deployment of tags onto cetaceans that cannot be captured has provided valuable data, attachment durations have been frustratingly short and variable. Our Phase II goal is to de ...

    SBIR Phase II 2019 Department of CommerceNational Oceanic and Atmospheric Administration
  3. In-Situ Electrospray Capture of Organic Bearing Particulates from Comets and Celestial Bodies

    SBC: Connecticut Analytical Corporation            Topic: S1

    NASA has need for technologies that can enable sampling from asteroids and from depth in a comet nucleus, improved in-situ analysis of comets. It has been identified that there is also a requirement for improved dust environment measurements amp; particle analysis, small body resource identification, and/or quantification of potential small body resources (e.g., oxygen, water and other volatiles, ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  4. Innovative, Rapidly Regenerable, Structured Trace-Contaminant Sorbents Fabricated Using 3D Printing

    SBC: Advanced Fuel Research, Inc.            Topic: H4

    The NASA objective of expanding the human experience into the far reaches of space requires regenerable life support systems. This proposal addresses the fabrication of structured (monolithic), carbon-based trace-contaminant (TC) sorbents for the space suit used in Extravehicular Activities (EVAs). The proposed innovations are: (1) the use of thin-walled, structured carbon TC sorbents fabricated u ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  5. Post-Process Optimizing of Additive-Manufactured Nickel-Based Superalloys

    SBC: Rem Chemicals, Inc.            Topic: Z3

    REM has, in Phase 1, proven concept and fully developed a combinatory surface finishing process optimizing Chemical Milling and Chemically Accelerated Vibratory Finishing capable of uniformly removing .020rdquo; in less than 24 hours from the surface of Additively Manufactured (AM) Inconel-625 components, fabricated by selective laser sintering and by powder blown direct energy deposition. The as- ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  6. Resilience-Based Optimization of Space Systems

    SBC: Magnin, Michael            Topic: H6

    With future missions of increasing complexity, duration, distance, and uncertainty, there has been a growing need for methods and tools that can permit the effective formation of early stage conceptual designs that are not only cost-effective, but also productive and resilient to failures. Work performed during Phase I, involved development of a method and tools to address these challenges for spa ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  7. Novel Technologies for Efficient NTP Reactor Decay Heat Removal and Utilization

    SBC: Ultra Safe Nuclear Corporation            Topic: Z10

    This SBIR will develop a decay heat solution for Nuclear Thermal Propulsion (NTP) systems that will significantly reduce the amount of hydrogen required to cool down an NTP system after operation. In addition, novel decay heat solutions will enable functionality beyond current NTP system concepts by enabling dual-mode power co-generation and high-Isp-reactor-powered Reaction Control System (RCS)/O ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  8. In-Situ Electrospray Capture of Organic Bearing Particulates from Alien Water Fountains

    SBC: Connecticut Analytical Corporation            Topic: S4

    NASA has need for technologies that can enable sampling from water jets, such as those observed emanating from the moon Enceladus and from the moon Europa. We propose to leverage past observations of the ability of electrospray ionization to capture and concentrate polar or polarizable trace species without damage, and combine that knowledge with recent discoveries in developing a hypervelocity ic ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  9. Model-Based Design Assessment and FM Visualization Technologies in TEAMS

    SBC: QUALTECH SYSTEMS, INC.            Topic: S5

    Qualtech Systems, Inc. (QSI), in collaboration with Dr. Stephen B. Johnson, President of Dependable System Technologies, LLC (DST), plan to develop techniques and the concomitant software modules for enabling modeling and visualization in QSIrsquo;s TEAMSreg; Toolset to represent the entire FM design as part of a system design. The main objective of the proposed effort is to have TEAMSreg; complet ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  10. AstroPorter

    SBC: TETHERS UNLIMITED, INC.            Topic: Z5

    Tethers Unlimited, Inc. (TUI) proposes to develop a software payload for the Astrobee free-flier to enable multi-agent collaborative robotics tasks for automation of human spacecraft, and robotic on-orbit servicing. AstroPorter is built on a mass property estimator capability and enables spacecraft to dynamically adjust its GNC parameters through the course of coupling to other robotic agents, pic ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government