You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. AirCore Reusable InSitu Sampler for CO2 and Trace Gas Measurements

    SBC: KALSCOTT ENGINEERING INC.            Topic: S108

    A novel design for an in situ air sampling sensor for CO2 and trace gases is proposed. The sensor, named AirCore, provides the advantages of existing in situ sensors (e.g. high resolution) but eliminates possible biases in analysis that often originate from imperfect measurement condition. The AirCore provides a significant savings in cost and weight while increasing the capabilities of existing i ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  2. Plug and Play Realtime Diagnosis for Ground Processing System Integration

    SBC: QUALTECH SYSTEMS, INC.            Topic: H1001

    NASA's "Ground Systems Development and Operations Program" is moving towards transforming parts of the Kennedy Space Center from a historically government-only launch complex to a spaceport bustling with activities involving government and commercial vehicles alike. The success of this transformation drive largely depends on achieving the ability to process multiple types of vehicles, within ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  3. Low Gravity Drug Stability Analyzer

    SBC: REAL-TIME ANALYZERS INC            Topic: H1205

    The overall goal of this proposed program (through Phase III) is to build a space-worthy Drug Stability Analyzer that can determine the extent of drug degradation. It will be able to monitor the drug active pharmaceutical ingredient (API) and its degradation product concentrations as a function of time, as well as determine if a drug is suitable for use (likely based on the presence of 90% or mor ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  4. Torrefaction Processing of Human Fecal Waste

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: H303

    New technology is needed to collect, stabilize, safen, recover useful materials, and store human fecal waste for long duration missions. The current SBIR Phase I proposal will examine an innovative torrefaction (mild pyrolysis) processing system that can be used to sterilize feces and produce a stable, free flowing powder than can be easily stored or recycled, while simultaneously recovering all o ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  5. Integrated System Health Management for Flexible Exploration

    SBC: QUALTECH SYSTEMS, INC.            Topic: X603

    Long-duration robotic and manned space missions have a number of unique requirements for mission success. These include ultra-high reliability, safety, sustainability and affordability of launch vehicles and spacecraft. These requirements, in turn, are allocated among critical subsystems, such as engines, propellants, structures, software systems, thermal protection, power, avionics, life support, ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  6. SWIFT-HPX- High Data Rate Ka-band Commications for Small Satellites

    SBC: TETHERS UNLIMITED, INC.            Topic: H905

    Leveraging TUI's SWIFT software defined radio (SDR) architecture, we propose to develop a 100 Mbps downlink and intersatellite crosslink capability with ranging and timing synchronization capabilities to enable more sophisticated CubeSat and small satellite missions. This effort will focus on designing a Ka-band communications solution including a high-gain patch antenna array and Ka-band RF ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  7. High Performance Plasma Channel Insulators for High Power Hall Thrusters

    SBC: SIENNA TECHNOLOGIES, INC.            Topic: S303

    NASA missions for planetary exploration require high power, long-life Hall thrusters. However, thruster power and lifetime are limited by the erosion of plasma channel walls. Current plasma channel insulator materials, such as BN or Borosil, have the required low secondary electron emission (SEE) but are susceptible to xenon plasma erosion. New plasma channel insulator materials with low SEE yi ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  8. Advanced Green Micropropulsion System

    SBC: Systima Technologies, Inc.            Topic: T201

    Systima in collaboration with the University of Washington will develop a high performance, advanced green monopropellant microthruster (0.1?1.0 N) for small- and micro-satellites. The microthruster utilizes a high energy density HAN-based monopropellant AF-M315E, and a novel injection system to maximize thruster performance. The propellant is non-toxic making it easy to store, integrate into mo ...

    STTR Phase I 2013 National Aeronautics and Space Administration
  9. A Compact In Situ Sensor for Measurement of Absorption and Backscattering in Natural Waters

    SBC: SEQUOIA SCIENTIFIC, INC            Topic: S109

    We propose to develop an active sensor for in situ measurement of the inherent optical properties (IOPs) absorption and backscattering at multiple wavelengths. Multi- or hyper-spectral absorption of particles and dissolved materials is routinely measured in the laboratory and in situ in order to characterize, for example, the quantities and types of phytoplankton based on concentrations of specifi ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  10. Advanced Optical Metrology for XRAY Replication Mandrels and Mirrors

    SBC: APERTURE OPTICAL SCIENCES INC.            Topic: S204

    Advanced x-ray observatories such as IXO and GenX will require thousands of thin shell mirror segments produced by replication using convex mandrels. Quality and cost effective manufacturing of these segments is proportional to the speed and effectiveness of the metrology we use in manufacturing and the ability to use accurate measurements to enable deterministic fabrication. AOS proposes developm ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government