You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Carbon-Supported Amine Sorbent Monoliths for Carbon Dioxide Removal

    SBC: Advanced Fuel Research, Inc.            Topic: B301

    The NASA objective of expanding the human experience into the far reaches of space will require the development of regenerable life support systems. On-board carbon dioxide (CO2) removal units play a key role in such systems ensuring high quality cabin air for crew members. Similar but more compact units are needed for extravehicular activities (space suit). The overall objective is to develop ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  2. A Hybrid Pyrolysis/Incineration System for Solid Waste Resource Recovery

    SBC: Advanced Fuel Research, Inc.            Topic: N/A

    The objective of the Phase I SBIR program was to demonstrate the feasibility of integrating pyrolysis and incineration steps into a system for processing of spacecraft solid wastes. The Phase I study involved a combination of bench scale experiments and data analysis. This work was accomplished in four tasks: 1) design and construct bench scale unit; 2) laboratory studies on solid waste processing ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  3. Panoramic Stereoscopic Video System for Remote-Controlled Robotic Space Operations

    SBC: Advanced Fuel Research, Inc.            Topic: F502

    This Phase I project will demonstrate the feasibility of providing panoramic stereoscopic images for remote-controlled robotic space operations using three fixed-position cameras. Remote-controlled robot operations are an important element in orbital and planetary space missions. Advanced display systems can greatly enhance the effectiveness of these operations. In the system proposed here, hum ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  4. WGM Resonators for Proteomic Analysis

    SBC: AGAVE BIOSYSTEMS INC.            Topic: B102

    Due to the extensive amounts of data generated from the genome sequencing projects, the focus of genomics has shifted from elucidating DNA sequence to the interpretation of gene function. In addition, as proteins are most often the targets of drugs, a method of studying the genome at the protein level is fueling the pharmaceutical industry?s interest in proteomics. By interpreting the interactin ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  5. Next Generation MK III Lightweight HUT/Hatch Assembly

    SBC: AIR-LOCK, INCORPORATED            Topic: F401

    The Next Generation MK III Lightweight HUT/Hatch Assembly will maximize the Hard Upper Torso - Hatch assembly weight reduction through the combination of innovative material selection and cross sectional redesign. The intent is to research, identify and down select robust lightweight materials that are best suited for space & planetary, (or lunar) exploration. This Next Generation MK III Lightwei ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  6. Large-Area, Self-Sufficient, Low-Cost MEMS Skin with Integrated Wirleless Communication Capability

    SBC: Anvik Corporation            Topic: S103

    An integrated unit that harnesses its energy from its surroundings and reacts to, and transmits, any changes in its environment in a predictable and reliable manner would be of significant benefit to the sensor community. Advances in Micro Electro Mechanical Systems (MEMS), silicon, SiGe, and GaAs fabrication technologies have helped to constantly add new sensing and communication functionality i ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  7. High-Resolution, High-Efficiency, Curved Diffraction Gratings Fabricated by Conformable, Maskless,100-nm Lithography

    SBC: Anvik Corporation            Topic: S106

    In this program, we will develop a novel process for fabricating large-area ultraviolet diffraction gratings on curved surfaces. This process is based on a unique conformable maskless projection lithography system technology that has been developed by Anvik Corporation. The UV gratings that will be fabricated using this technology would be attractive for integration into imaging spectrometers, for ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  8. Three-Dimensional Optical Coherence Tomography (3D OCT)

    SBC: APPLIED SCIENCE INNOVATIONS, INC            Topic: B103

    Applied Science Innovations, Inc. proposes to develop a new tool of 3D optical coherence tomography (OCT) for cellular level imaging at video frame rates and dramatically reduced probe cross-section. Existing commercial OCT tools are focused in ophthalmology, where examination is external to the eye, the size of the probe is not important, and cellular level resolution is not required. The paten ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  9. Cytometer on a Chip

    SBC: CIENCIA INC            Topic: B203

    The Cytometer on a Chip will provide a powerful alternative to conventional flow cytometry. This system spatially sorts cells on a microarray chip based on the presence of specific cell surface markers. Detection is accomplished with grating-coupled surface plasmon resonance imaging (GCSPRI). This is a label-free detection technology that eliminates the need to fluorescently label the cells, as ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  10. Computational Modeling of Flow Control Systems for Aerospace Vehicles

    SBC: CLEAR SCIENCE CORP            Topic: A206

    Clear Science Corp. proposes to develop computational methods for designing active flow control systems on aerospace vehicles with the primary objective of controlling lift, drag, and flow separation. Simulated control inputs will include moving boundaries for aerodynamic shaping and aspirating walls for virtual shaping and separation control. The software will include model order reduction, sys ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government